How to Write Pretty on Procreate
StyleFrame Team7 min read
To write pretty on Procreate, work on a large canvas (3000 px wide or more), use a monoline brush with Streamline set between roughly 60% and 100%, and draw slowly with deliberate strokes. Pause briefly before lifting the pencil so stroke ends stay clean, and draw curves outward by rotating the canvas instead of pulling toward yourself. Sketch your composition first, then use Procreate's text tool, drawing guides, and Liquify to refine spacing and shape.
Neat handwriting is mostly settings and habits rather than talent. The sections below cover the setup, the stroke technique, and the cleanup steps that matter most, plus how to carry finished lettering into a motion pipeline.
Start With the Right Canvas
Resolution affects how smooth your lettering looks, and it is hard to fix later. Create a canvas at least 3000 pixels wide. A tall format such as 3000 x 3500 gives you room to work in without scaling up and softening edges.
If the piece will be printed, set exact dimensions and keep DPI at 600. For an 8 x 10 print, switch the units to inches and enter those values. If the lettering is going into a video timeline, work at or above your delivery resolution and match the aspect ratio of your comp, so you aren't cropping lettering later.
Use the Apple Pencil if you can. Finger drawing works for experimenting, but pressure responsiveness is what makes strokes look intentional.
Choose a Brush That Matches the Look You Want
Not every brush in Procreate behaves the same way, and that is the first thing to understand.
- Monoline brush: Keeps the same stroke width no matter how hard you press. This is the easiest route to clean, even lettering and the best place for beginners to start.
- Brush pen: Pressure-sensitive, so the line thickens as you press harder. This gives you the thick-and-thin contrast of brush calligraphy, but it takes more control.
- Sketching or pencil brushes: These follow your natural handwriting closely because they have little stabilization built in. They're good for rough drafts, not final lines.
Calligraphy, hand lettering, and brush lettering also call for different approaches. Calligraphy is structured writing with flowing single strokes. Lettering is closer to drawing letters as illustrations, with fewer rules. Brush lettering imitates brush strokes with a looser feel. Decide which you're going for before you pick a brush.
Turn On Stabilization (Streamline)
Streamline is probably the most useful setting for smooth lettering. Tap a brush, open the Stabilization category, and raise the Streamline amount. Higher values smooth wobble from curved strokes.
Choosing a value is a tradeoff:
- 60% keeps strokes close to your actual hand movement while removing shakiness.
- 65-85% suits faster letterers, because very high values can make the line lag and skip parts of fast strokes.
- 100% gives the smoothest curves but forces you to draw slowly and deliberately.
If a brush feels like it is over-correcting or fighting you, lower the amount. If your lettering looks jittery, raise it. Test with a few repeated letters like "o", "a", and "e" before committing to a whole piece.
Control the Start and End of Every Stroke
Messy terminals are one of the most common reasons digital lettering looks amateur. Procreate is very sensitive, so a stroke can end in a small bump or an unintended point.
To get flat, clean ends:
- Pause for a moment before you drag at the start of the stroke.
- Pause again at the end before you lift.
- Lift straight up or back into the stroke. Lifting down and away is what creates the little point.
If you do want tapered, pointed ends, use pressure on purpose. In the brush settings, the Taper category lets you control both pressure taper and touch taper. Leave everything at 0 for fully rounded ends, and increase it to add points.
Draw Curves the Right Way
Most wobble in curved letters comes from your hand position, not the app. Draw curves outward, away from your body, and avoid pulling strokes toward you. When a shape requires the other direction, rotate the canvas with two fingers so the curve becomes an outward one.
Procreate also helps you fix curves:
- Hold at the end of the stroke. If you keep the pencil pressed down after drawing, Procreate snaps the stroke into a smoothed shape.
- Edit Shape. After the snap, tap Edit Shape to move the nodes of the curve and adjust it without redrawing.
This works best on single, clean strokes such as the bowls of letters, underlines, and flourishes. It is less useful on complex connected script.
Sketch the Composition First
Pretty lettering is usually designed, not just written. Start with a loose thumbnail sketch on its own layer, in a bright color so you can see it clearly, then lower its opacity when you ink over it.
Treat the phrase as an illustration. Instead of setting it on one straight line, think about:
- Which word deserves the most visual weight
- Whether mixing a script word with block capitals helps the hierarchy
- How shorter words can nest into the curves of a larger one
- Where flourishes, underlines, or negative space will balance the layout
Try several arrangements. The sketch phase is cheap, and a good composition does more for the final result than perfect stroke control.
Use Type as a Tracing Base
If you worry about proportions, let a font do the structural work. Add text through Actions (wrench icon) > Add > Add text, type your phrase, and choose a font. Procreate accepts TTC, TTF, and OTF files, so you can import your own.
Then:
- Lower the opacity of the text layer.
- Create a new layer above it.
- Trace over the letters with your lettering brush, changing shapes as you go so it doesn't look like the font.
This is especially useful for longer quotes, where consistent spacing and alignment are the hard parts. Check spelling before you start tracing. It's easy to ink a whole line and then notice a typo.
Add Guides for Alignment
Drawing Guides keep baselines, x-heights, and spacing consistent. Go to Actions > Canvas > Drawing Guide, turn it on, and adjust the grid size to match the scale of your letters. For angled or radial layouts, the Symmetry tool or a custom grid can help.
Consistent letter height, slant, and spacing are what make lettering look professional. A grid takes the guesswork out of all three.
Clean Up With Liquify and Layers
Once the lettering is inked, polish it:
- Liquify is useful for small final adjustments, such as nudging a curve, tightening a terminal, or evening out a bulge.
- Separate layers let you keep sketch, ink, color, and shadow independent, so you can change one without redoing the others.
Keep the sketch layer hidden but not deleted. If a client asks for a revision, it is faster to adjust than to rebuild.
Taking Procreate Lettering Into Motion
If you're a motion designer, hand lettering often ends up in a timeline rather than on a print. Procreate is a good place to design the letterforms, but animating them is a separate problem, and a few habits make the handoff easier.
Prepare the artwork for animation. Keep each word, flourish, and underline on its own layer, and name them. Export the lettering with a transparent background at your delivery size. In your compositing or animation software, those separate layers can then be animated individually.
Common Mistakes to Avoid
- Setting Streamline to 100% and writing fast. The line will lag or drop parts of your stroke. Slow down or lower the value.
- Using a stabilized brush for natural handwriting. It won't match your normal writing. Use a pencil-style brush for that.
- Working on a small canvas. Low resolution makes curves look jagged when you scale up.
- Skipping the sketch. Without a composition plan, lettering tends to look like text on a line.
- Lifting the pencil in the wrong direction. This creates unintended points at stroke ends.
- Flattening layers too early. You lose the ability to revise or animate parts separately.
A Quick Practice Routine
- Create a 3000 x 3500 px canvas and turn on a drawing guide.
- Pick the monoline brush and set Streamline to about 60-80%.
- Fill a line with downstrokes, then ovals, pausing before each lift.
- Letter a short word using a typed base at low opacity.
- Hold the end of one stroke to test shape snapping, then adjust it with Edit Shape.
- Finish with a small Liquify pass, and compare against your first attempt.
Repeat this for a week and your stroke control should improve. Pretty lettering on Procreate comes down to a stable brush, a large canvas, patient strokes, and a plan for the layout.