How to Vectorize a Procreate Image in Illustrator
StyleFrame Team9 min read
To vectorize a Procreate image in Illustrator, export the artwork from Procreate as a high-resolution PNG, open it in Illustrator, and run Image Trace with a preset that suits the art (Black and White Logo for line work, 3 to 16 Colors for flat color). Then click Expand to convert the trace into editable paths, and clean up the anchor points and shapes. Procreate only produces raster files, so you need another app to convert them to vectors, and tracing in Illustrator works best on clean, high-contrast artwork drawn on a large canvas. Tracing a layer at a time gives you separate shapes you can bring into After Effects for animation.
What vectorizes well and what doesn't
Image Trace is an automatic process, and it can only be as good as the source. Flat color, bold line work, lettering, and shapes with clear edges convert cleanly. Soft gradients, textured brushes, drop shadows, and dense patterns do not. They turn into hundreds of tiny overlapping shapes, or into blocky posterized bands.
If your Procreate piece leans on grain, blended shading, or painterly brushes, plan for one of two outcomes. Either simplify the artwork before tracing, or accept that you'll rebuild some areas by hand with the Pen tool. Even on good source art, expect to edit the paths afterward. No trace is final on the first pass.
For motion work this matters more than it does for print. Every extra anchor point and every stray speck becomes something you may have to deal with later in After Effects, whether it's a shape layer path that jitters when animated or a file that renders slowly. A cleaner vector at the start saves time at the end.
Step 1: Prepare the artwork in Procreate
Most trace problems start before the file leaves the iPad. A few habits help:
- Work large. A canvas of around 300 dpi at a generous pixel size gives the tracer more edge information. Small, low-resolution canvases produce lumpy curves.
- Separate elements onto layers. Put the linework, each color region, and any lettering on their own layers, ideally so shapes don't touch or overlap in confusing ways. Tracing a layer at a time gives you cleaner results than tracing one flattened image.
- Keep the palette simple. Fewer colors means fewer shapes. If you plan to animate parts of the piece, decide now which parts need to move independently and keep those on separate layers.
- Use solid, hard-edged brushes for anything you want to trace precisely. Textured brushes can still be traced, but the result depends heavily on the brush and the settings, so test before committing.
- Hide the background. For linework, a transparent background (or pure white) avoids having to remove a background shape later.
Step 2: Export and move the file to your computer
In Procreate, open the Actions menu (the wrench icon), choose Share, and export as PNG. PNG preserves transparency and avoids the compression artifacts of JPEG, which can introduce noise that Image Trace will faithfully convert into shapes.
If you want to trace layers separately, you have two options. You can toggle layer visibility and export each as its own PNG. Alternatively, export a layered PSD, open it in Photoshop, and save the layers out as individual files. The Photoshop route is faster when you have many layers.
Move the files to your computer using AirDrop, iCloud, or a cloud drive. Avoid sending them through a messaging app that recompresses images.
Step 3: Open the image and run Image Trace
Open the PNG in Illustrator, or place it in a document sized for your final composition. When the image is selected, the Image Trace button appears in the Control bar. If it doesn't, open Window > Image Trace.
Illustrator treats the placed PNG as a raster object. You can only scale it, and enlarging it loses quality. Image Trace builds a vector version on top of it.
Tracing black linework
- Select the image and open the Image Trace panel.
- Choose the Black and White Logo preset, or Sketch Art for looser drawings.
- Turn on Preview so you can see the result as you adjust.
- Adjust Threshold. A higher value turns more pixels black, so lines thicken. A lower value thins them.
- Open the Advanced section and tune Paths, Corners, and Noise. Higher Paths and Corners follow the original more tightly. Higher Noise ignores small specks, which helps with rough or grainy lines.
- Enable Ignore White if you want the white background to disappear, leaving only the line shapes.
Tracing flat color
Switch the Mode to Color, or use presets such as 3 Colors, 6 Colors, or 16 Colors. Reduce the palette to the lowest number that still looks right. Use the Palette setting to pick Automatic or a limited palette, and check that the traced colors match your original swatches. If a few colors drift, you can fix them after expanding.
Tracing layers separately
If you exported each layer individually, trace each one with settings tuned to its content. Linework may want Black and White with a tight threshold, while color fills may want a 3 or 6 Colors trace. Stack the traced results in matching Illustrator layers to rebuild the original composition. This approach takes longer to set up, but it gives you the most control and the cleanest shapes to animate.
Step 4: Expand and clean up the paths
The trace result is still a live effect. Click Expand in the Control bar to convert it into real, editable paths. You'll typically get a group of compound shapes.
From here, cleaning up is the real work:
- Ungroup and delete stray specks and tiny shapes that came from noise or paper texture.
- Check for white shapes. If you didn't use Ignore White, delete the white background shape so it doesn't sit behind your art.
- Simplify paths. Use Object > Path > Simplify to reduce anchor counts on shapes with too many points. Be careful, since aggressive simplification flattens detail.
- Fix color. Recolor shapes with your intended swatches, or use Recolor Artwork to remap the palette at once.
- Repair joins and gaps. Tracing can leave small gaps between adjacent fills. Overlapping shapes slightly, or using the Pen and Direct Selection tools to adjust edges, avoids thin lines showing up between them.
- Name and organize layers. Descriptive names carry through to After Effects, which makes animation much easier.
For hand lettering, trace the lettering on its own layer and check counters, such as the holes in letters like "a" and "e", to make sure they stayed open.
Step 5: Get the vectors into your motion pipeline
Once the artwork is clean, how you export depends on where it's going.
After Effects. Save the file as an Illustrator (.ai) file with layers preserved, and import it as a composition or footage. To get editable animatable paths, right-click the imported layer and choose Create Shapes from Vector Layer. You then have shape layers with fills and paths that you can animate with Trim Paths, Repeaters, Wiggle Paths, and expressions. Because the shapes are resolution independent, you can scale a layer up in a composition without softening edges, as long as continuously rasterize is enabled where needed.
Cinema 4D. Illustrator paths can be imported as splines and extruded with a Extrude generator, which works well for turning logos or lettering into 3D objects. Keep paths simple, because messy anchors produce messy geometry.
Blender. Export an SVG from Illustrator and import it through File > Import > Scalable Vector Graphics. Blender converts the shapes into curve objects that you can extrude or bevel.
Nuke and other compositing tools. Nuke is raster-oriented, so the common approach is to render the vector artwork at the final resolution from Illustrator or After Effects and bring in the image sequence or a high-resolution PNG with alpha.
Before handing files to another artist, test that the shapes behave. Scale them, animate a few points, and look for odd holes or overlapping fills that only show up in motion.
An alternative for quick black-and-white tracing
If you only have a simple black-and-white drawing and you're away from your computer, Adobe Capture can trace images on your iPad. It requires a free Adobe account and has a shapes mode that converts an image into vector outlines. It works best on black-and-white art, and like any automatic tracer it usually needs some manual editing afterward. For anything with color or fine layer control, Illustrator's Image Trace is more flexible.
Common problems and fixes
- Jagged or lumpy edges: The source resolution is too low. Re-export from a larger Procreate canvas, or trace at a larger size.
- Too many shapes and anchor points: Raise Noise, lower Paths and Corners precision, or reduce the color count. Then simplify after expanding.
- Lost fine detail: Do the opposite. Increase Paths and Corners, lower Noise, and trace at a higher resolution.
- Lines merge in dark areas: Keep overlapping strokes on separate layers, or redraw tight spots.
- Messy color regions: Trace color layers individually rather than as one flat image.
- Grain showing up as shapes: Use a cleaner brush, or increase Noise and delete leftover specks by hand.
When you want the look without hard vector conversion
Tracing flattens a hand-made illustration into clean shapes, and sometimes that's not what a project needs. If the goal is to keep the texture and character of a Procreate piece while animating it, converting to vectors can strip out exactly what made it appealing.
This is where can sit beside Illustrator rather than replace it. Styleframe is an AI video and motion tool built for artistic control. You drive generations with reference images, video clips, and keyframes instead of a single prompt. Frames-to-Video lets you set keyframes from your Procreate art and generate the motion between them. Restyle and Ink-and-Paint apply the look of a reference to footage or frames. Remove Background isolates elements, 2D-to-3D and Turntable help explore a drawing in dimension, and 4K Upscale produces production-ready output. Iteration is non-destructive, so you can try variations without losing earlier versions.
You can also combine the approaches. Keep your traced vectors for elements that need crisp, scalable shapes in After Effects, and use Styleframe for passages where the painterly or inked quality should survive in motion. Styleframe exports image sequences, so the results drop into an After Effects or Nuke composite like any other plate. Your compositing workflow stays the same.
Quick checklist
- Draw large, with elements on separate layers and a simple palette.
- Export PNGs from Procreate (or a PSD to split layers in Photoshop).
- Open in Illustrator and choose an Image Trace preset that fits the art.
- Tune Threshold, Paths, Corners, and Noise with Preview on.
- Expand, then clean up specks, white shapes, gaps, and anchor counts.
- Name layers, then export as .ai or SVG for After Effects, Cinema 4D, or Blender.
- Test the shapes in motion before committing to the animation.
Done carefully, the process turns a quick Procreate sketch into usable, scalable motion graphics assets. The quality of the trace depends mostly on the quality of the preparation.