How to Used a Image in Another Image Procreate
StyleFrame Team8 min read
To use an image inside another image in Procreate, open your base artwork, tap Actions (the wrench) → Add → Insert a photo (or Insert a file), then move, scale, and blend the new layer with the Transform tool. To bring in only part of another piece of artwork, select it, copy it with the three-finger swipe-down gesture, and paste it into the destination canvas. To fit one image inside a shape or another image, place it directly above the target layer and apply a Clipping Mask.
The sections below cover each method, the limits to watch for, and how to hand the result to a compositing pipeline.
Method 1: Insert an image as a new layer
This is the most direct way to place one image on top of another.
- Open the canvas that will act as your base image.
- Tap Actions → Add.
- Choose Insert a file to pull from the Files app, or Insert a photo to pull from your Photos library. Take a photo also works if you want to shoot something on the spot.
- Select the image. It lands in the center of the canvas on its own new layer.
Procreate accepts PNG, JPEG, and PSD through these routes. One catch matters if you work from layered files: a PSD inserted this way arrives as a single flattened image. To keep its layers, use Gallery Import instead of the Add menu.
Position and scale the inserted image
Once inserted, the image is in Transform mode:
- Tap Fit to Canvas if you want it sized to the document. Depending on aspect ratio, edges may run past the frame, which is fine if you only need part of it.
- Drag a corner handle, or pinch with two fingers, to resize.
- Choose Uniform to keep proportions, or Freeform to stretch independently. Use Distort when you need to fit the image to a perspective plane, such as a screen or a wall.
- Snapping and Magnetics help you align to guides and canvas edges. If you want fluid, pixel-level placement, switch snapping off.
- Tap the arrow at the top (or another tool) to commit the transform. Tap the Transform icon again to re-enter edit mode.
If you're unhappy with a move, tap the undo button on the left side of the screen.
Method 2: Copy part of one canvas into another
Sometimes the "image" you want to reuse is a piece of another Procreate document: a texture, a prop, a hand-drawn element. Inserting a whole file would drag in everything around it, so copy a selection instead.
- In the source canvas, tap the S icon to activate Selection.
- With Freehand active, draw a loop around the area you want. If the surrounding area is empty, the loop can be loose.
- Swipe down with three fingers to open the Cut/Copy/Paste menu, then tap Copy.
- Open the destination canvas and repeat the three-finger swipe, then tap Paste.
- While the Transform boundary is active, move, rotate, or scale the pasted piece into place.
If you'd rather not use the three-finger gesture, the same clipboard actions are in the Actions menu under Add (Cut, Copy, Copy Canvas, Paste). That's useful if you've turned off touch gestures to avoid accidental edits.
A note on moving layers between canvases
If you're moving layer groups into another document and the import stalls or arrives empty, move the individual layers instead of the group, then regroup in the new canvas.
Method 3: Place an image inside a shape or another image
Compositing often means more than overlaying: you want the image to appear only inside a silhouette, a text shape, or a region of the base artwork. Procreate handles this with clipping masks and layer masks.
Clipping Mask
- Create or select the layer whose shape should contain the image (a filled shape, a rasterized text layer, a painted region).
- Insert your image so it sits directly above that layer.
- Tap the inserted layer's thumbnail and choose Clipping Mask.
The image now shows only where the layer below has pixels. Move the image layer with Transform to reposition it within the shape. Because the clip is non-destructive, you can swap the image at any time without redrawing the shape.
Layer Mask
If you want soft edges or hand-painted reveals, add a Mask to the inserted layer instead. Paint with black to hide and white to reveal. A soft brush gives you feathered transitions, which suits blending a photo into a painted background.
Both approaches keep the original image intact underneath, so you can adjust later.
Blend the two images so they actually sit together
A pasted image usually looks pasted until you match it to its surroundings. Several layer-level tools help:
- Opacity: Adjust the layer's opacity. This is the simplest way to check alignment while tracing or compositing.
- Blend modes: Open the layer's blend mode options to change how the inserted image interacts with the layers below.
- Adjustments: Use Procreate's Adjustments tools on the inserted layer to match color, contrast, and focus.
- Drawing over the top: Create a new layer above the inserted image and paint on it. If you plan to remove the underlying photo later, as in a trace workflow, keep your linework on its own layer so deleting the photo doesn't affect it.
Because each inserted image is its own layer, you can toggle visibility to check how your work compares to the original.
Use Private Layers for reference you don't want in the output
If the second image is purely reference, such as a mood board frame or a photo you're tracing, insert it as a Private Layer. In the Add menu, slide the Insert a file or Insert a photo tab to the left to reveal the private option. A Private Layer behaves like any other layer, but it doesn't appear in the Gallery preview or in an exported Time-lapse video. Note that layered PSDs can't be imported as private layers; they arrive flattened.
For reference you want pinned while you zoom in on details, Procreate's Reference companion (Actions → Canvas → Reference) is a better fit. It holds an image in a floating window, so the reference doesn't go off-screen when you zoom the canvas, and you can sample colors from it.
Common problems and quick fixes
- The image looks soft after scaling. Procreate works with raster images, so enlarging, rotating, or distorting can cost some sharpness. Insert images at or above the size you need, and apply transforms once rather than repeatedly.
- The PSD lost its layers. Use Gallery Import for layered PSDs; the Add menu flattens them.
- The image runs off the canvas. That's expected with Fit to Canvas on mismatched aspect ratios. Resize it with Transform if you want it to fit within the frame.
- Gestures keep triggering accidentally. Disable them in settings and use the Actions menu for clipboard commands.
Getting the composite into a motion or VFX pipeline
If the combined image is destined for After Effects, Nuke, or a 3D scene, the way you build it in Procreate matters. Keep elements on separate layers so you can export them separately. Use clipping masks and layer masks rather than flattening, so you retain control over each piece after export. Check your canvas dimensions against your comp resolution before you start, since upscaling later adds softness.
Once you're in your compositor, those layers become the assets you animate with parallax, camera moves, and effects.
Where Styleframe fits after Procreate
Procreate is a good place to build a still: placing one image inside another, masking, and painting. When that still needs to move or take on a different look, Styleframe is an AI video and motion tool built for artists who want to steer the result rather than accept a one-click output. Every generation is driven by your own reference images, video clips, and keyframes.
Practically, you can take your composited artwork and use it as a reference or keyframe:
- Frames-to-Video builds motion between keyframes you supply, so your Procreate start and end frames define the shot.
- Restyle and Ink-and-Paint transfer the look of a reference image onto footage or frames, which helps if your Procreate piece establishes the visual style.
- 2D-to-3D and Turntable can take a flat piece of artwork toward a rotating or dimensional view.
- Remove Background isolates the subject, and 4K Upscale brings output to production resolution.
Iteration is non-destructive, so you can try variations without overwriting earlier results. Your compositing workflow stays the same: Procreate for the artwork, Styleframe for controlled motion and style, and your usual compositor for the final assembly.
Quick summary
- Whole image on top: Actions → Add → Insert a photo or Insert a file, then Transform.
- Part of another artwork: Select, copy, paste into the new canvas.
- Image inside a shape: Clipping Mask or Layer Mask.
- Make it fit visually: Opacity, blend modes, and adjustments.
- Reference only: Private Layer or the Reference companion.
- Layered PSD: Use Gallery Import to keep layers.
Master those few moves and you can combine images quickly and keep every element editable for whatever comes next in your pipeline.