How to Use the Blend Tool in Procreate
StyleFrame Team8 min read
Procreate has no single "Blend tool." Blending is handled by three features: the Smudge tool (the finger icon in the top right) for painting colors into each other, layer Blend Modes (tap the "N" on a layer) for controlling how layers interact, and Gaussian Blur in the Adjustments menu (magic wand icon) for softening a whole layer at once. For most blending work, start with Smudge at moderate opacity, then use Blend Modes and Gaussian Blur to refine.
What "the Blend Tool" Means in Procreate
Some searches for the "blend tool" may come from artists used to Illustrator's Blend tool or Photoshop's Mixer Brush. Procreate splits that job across several features:
- Smudge tool: manual, stroke-based blending. It drags existing pigment around the canvas.
- Blend Modes: non-destructive, layer-level blending that changes how one layer's color and luminosity combine with the layers below.
- Gaussian Blur: a global softening effect applied to a layer or to specific areas painted with the Pencil.
- Soft brushes and opacity: building gradients by layering low-opacity strokes.
Smudge is the closest to what most people mean. It's the tool to learn first.
How to Use the Smudge Tool
The Smudge tool sits between Paint and Erase in the top-right toolbar. It uses the same brush library as Paint and Erase, so any brush can become a blending brush.
Step 1: Lay down your colors
Place the two colors you want to blend next to each other on the same layer. Analogous colors, such as blue and purple or yellow and orange, blend more cleanly than opposing hues. Blending complementary colors tends to produce muddy midtones.
Step 2: Select the Smudge tool and a brush
Tap the Smudge icon once to activate it. Tap it again to open the brush library and choose a brush. The brush you pick changes the result more than most beginners expect:
- Soft airbrush: smooth, diffuse transitions, good for skin, glows, and soft gradients. Overuse leads to blur.
- Textured brushes (chalk, gouache, acrylic): painterly transitions that keep some visible texture.
- Hard-edged brushes: useful for pushing shapes around rather than blending.
A handy shortcut: tap and hold an unselected Paint, Smudge, or Erase icon to carry your current brush over to that tool. This lets you paint, smudge, and erase with a matched brush and keep a consistent texture.
Step 3: Set size and strength
The left sidebar has two sliders. The top one controls brush size, and the bottom one controls opacity, which for Smudge acts as strength.
- High strength drags pigment like wet paint and can leave visible drag lines. It blends fast but can look aggressive.
- Low strength gives a softer result and is better for gradients, shadow-to-highlight transitions, and smoothing pencil work.
For most blends, start low and build up. You can always add another pass, but it's harder to undo a heavy smear without losing the underlying shapes.
Step 4: Stroke with intention
Don't scrub back and forth. Use light, sweeping strokes that follow the form of the object, such as the curve of a cheek, the direction of a cloud, or the flow of a fabric fold. Work from the boundary between two colors outward, then lift and repeat. A larger brush smooths big areas, and a smaller brush handles tight spots.
How to Use Blend Modes
Blend Modes are a different kind of blending. Rather than moving pixels, they change how a layer's colors interact with the layers beneath it. If you work in After Effects, the logic will feel familiar.
Changing a layer's mode
- Open the Layers panel (the double-rectangle icon, top right).
- Find the letter on the right side of the layer. "N" means Normal.
- Tap it to open the Blend Modes menu.
- Tap the mode name and scroll through the list. Each mode previews live on your layer.
- Tap outside the list to confirm, and adjust the opacity slider as needed.
A quick way to change opacity without opening the menu: two-finger tap a layer, then slide left or right on the canvas.
Modes worth knowing
- Multiply: darkens by multiplying the base by the blend color. It's a go-to for shadows.
- Screen: the opposite of Multiply. It lightens and is good for highlights and glows.
- Overlay and Soft Light: add contrast and color depth while preserving the underlying detail.
- Color Burn and Linear Burn: stronger darkening. Color Burn increases contrast and saturation in the midtones, while Linear Burn is darker than Multiply but less saturated than Color Burn.
- Color: applies hue and saturation from the top layer while keeping the luminosity below. This is useful for recoloring line art or shading.
A classic setup is a shadow layer set to Multiply and a highlight layer set to Screen, sitting above your base color. Because the blend happens at the layer level, you can swap colors or adjust opacity later without repainting.
How to Use Gaussian Blur
Gaussian Blur is the quickest way to get a very smooth blend, though it gives you the least control.
- Select the layer you want to soften.
- Tap the Adjustments icon (magic wand) and choose Gaussian Blur.
- Choose Layer to apply the blur across the whole layer.
- Drag your finger or Pencil across the screen. A percentage appears at the top showing the blur amount.
- Lift to commit.
Higher percentages produce smoother blends. This approach works well for background gradients, bokeh-style depth, and glow layers.
Keeping crisp detail with a blur
A popular technique avoids the all-over softness of a blur:
- Duplicate your painted layers.
- Hide the original set.
- Merge the duplicates into a single layer.
- Apply a light Gaussian Blur to the merged layer.
- Unhide the originals, then use the Eraser on the originals as needed (or on the blurred layer) to bring back crisp edges around focal points.
You get smooth transitions in the shadows and midtones, with sharp detail where the eye lands.
A Practical Blending Workflow
Combining the three approaches usually gives better results than relying on any one:
- Block in flat color shapes on separate layers.
- Set shadow and highlight layers to Multiply and Screen.
- Smudge at low strength along the form to blend each layer's edges.
- Use Alpha Lock or a clipping mask to keep blends inside the shape and avoid bleed into neighboring areas.
- Apply a light Gaussian Blur on background layers to separate them from the focal subject.
- Zoom out and check for harsh edges, then fix them with another low-strength smudge pass.
Common Blending Mistakes
- Overworking one spot. Repeated heavy smudging flattens color and removes the vibrancy. Switch to a lower strength or paint the transition with a soft brush instead.
- Using the wrong brush. A soft airbrush on everything gives a blurry, plasticky look. Match the smudge brush to the texture of your painting brush.
- Blending on one flat layer. If you smudge everything together, you can't revise later. Keep shadows, highlights, and base color separate where possible.
- Mixing very different hues. Introduce an intermediate color rather than forcing two far-apart colors to meet.
- Blurring everything. Full-layer Gaussian Blur can erase the detail that sells a piece. Use it selectively.
Taking Procreate Blends into a Motion Pipeline
Many motion designers and animators use Procreate for concept frames, style frames, and texture work, then move into After Effects, Nuke, or Blender for the real production. Smooth blends hold up well as backgrounds, gradient mattes, and painted textures, so it's worth exporting layers separately (PNG with transparency) so you can recomposite them rather than working from a flattened image.
If you want to carry a painted look into moving footage, an AI video tool like may be worth exploring. Your Procreate paintings can serve as reference images or keyframes.
It can sit alongside your existing workflow. You keep your painted source, and you decide how any generated shots get graded, comped, and finished.
Quick Reference
FAQ
Where is the blend tool in Procreate? There isn't one. Use the Smudge tool (finger icon, top right), Blend Modes (tap the letter on a layer), or Gaussian Blur (Adjustments menu).
Can I use any brush for blending? Yes. Smudge draws from the same library as Paint and Erase, and each brush gives a different blending character.
How do I make smudging less harsh? Lower the opacity slider, use a larger brush, and follow the shape of the form with light strokes.
Is blending with layers better than smudging? They solve different problems. Blend Modes are non-destructive and good for lighting and color interaction. Smudge is better for painterly edges. Most finished pieces use both.