How to Use Select Tool in Procreate
StyleFrame Team8 min read
To use the Select tool in Procreate, tap the S-shaped icon in the top toolbar and pick one of four modes: Automatic, Freehand, Rectangle, or Ellipse. Make your selection, refine it with Add, Remove, Invert, or Feather, then tap another tool such as Transform to edit only the selected area. Once the selection is active, you can move it, recolor it, erase it, or copy it onto its own layer.
What the Select tool does in Procreate
The Select tool isolates part of a layer so that edits touch only that area. Anything you paint, smudge, erase, fill, or transform stays inside the selection mask while the rest of the layer is protected.
For motion and VFX artists, that matters because Procreate is often where you build or clean up 2D assets before they go into After Effects, Premiere Pro, or a 3D package. A character's arm, a logo mark, a texture patch, or a hand-drawn matte often has to be separated from a flat sketch before it can be animated or composited. The Select tool is the fastest way to do that on an iPad.
One rule to remember: selections apply to the active layer. If the content you want is on a different layer, nothing happens, or you get an empty copy. Check the Layers panel before you select.
Step 1: Open the Select tool and choose a mode
Tap the S icon in the top toolbar. The selection toolbar appears along the bottom of the screen with four modes. Tap the S icon again at any time to exit.
Automatic
Automatic selects by color. Tap an area and Procreate selects that body of color plus similar neighboring values. Tap and hold, then drag left or right to change the Selection Threshold:
- Drag left for a lower threshold, which selects only colors close to the one you tapped.
- Drag right for a higher threshold, which pulls in a wider range and begins to flow into surrounding areas.
The threshold behaves much like ColorDrop's threshold. Automatic works best on flat-color art such as ink-and-paint style illustration, vector-like logos, and cel-style character art. On soft gradients or textured paintings it can leak, so expect to clean up afterward.
Freehand
Freehand is a common choice for custom shapes. Trace around the area with Apple Pencil or a finger and lift to close the shape. You can also tap from point to point to build a polygonal selection with straight edges, which is useful for hard-surface shapes, signage, and UI elements.
Rectangle and Ellipse
These make geometric selections. Drag across the area to define the shape. In Procreate Dreams, holding a second finger down while you drag snaps the selection to a perfect square or circle.
Step 2: Refine the selection
A first pass is rarely clean. Use the controls on the selection toolbar to tune it.
- Add: Each new selection is added to the existing one. Use it to build up complex shapes from simple ones.
- Remove: Subtracts the next selection from the current one. Good for cutting holes or trimming overshoot.
- Invert: Flips the selection so that everything except your chosen area is active. This is the quickest way to protect a subject and edit the background.
- Feather: Softens the selection edge with a slider. Light feathering helps when you plan to blend an edit into surrounding pixels. Leave it off when you need hard edges for cutouts.
Mix modes for better results
Modes can be combined in a single selection. A reliable workflow is to start with Automatic to grab the bulk of a flat-color shape, then switch to Freehand in Add or Remove mode to fix the edges. This is faster than tracing the whole outline by hand and cleaner than trusting Automatic alone.
Undo mistakes mid-selection
While you are building a selection, a two-finger tap undoes the last step and a three-finger tap redoes it, so you don't have to leave the tool to fix a stray point.
Step 3: Commit the selection and edit
A selection is committed when you tap another tool. You will see moving diagonal lines over the area outside your selection. In that mask, the lined area is protected and the clear area is editable.
Once committed, you can:
- Paint, smudge, or erase inside the selection without touching the rest of the layer.
- ColorDrop into the selection to fill it.
- Color Fill from the selection toolbar to fill with your current color.
- Clear to clear the selection itself. It does not remove the content.
- Transform to move, scale, rotate, or distort it.
To tweak how visible the diagonal mask is, look in the canvas or preferences settings. In Procreate Dreams, it is a Selection mask visibility slider under Settings → Canvas. Raising the visibility helps when you work on busy artwork.
Step 4: Move and transform a selection
With a selection active, tap the arrow icon (Transform). A bounding box appears around the selected content.
- Move by dragging inside the box.
- Scale by dragging a corner handle.
- Rotate by dragging the green dot.
The options at the bottom give you more control:
- Uniform keeps proportions locked.
- Freeform lets you stretch freely, which changes perspective quickly.
- Distort moves corners independently for perspective-style adjustments.
- Warp places a mesh over the selection so you can bend and push the shape.
- Snapping and Magnetics keep movement aligned to guides and other elements so transformations stay straight.
Tap the arrow icon again, or any other tool, to apply the change.
Step 5: Copy, cut, and paste to new layers
Separating content onto its own layer is probably the most useful use of the Select tool for animation work.
Copy & Paste
Tap Copy & Paste on the selection toolbar to duplicate the selected pixels onto a new layer. The original stays untouched. Remember that only the active layer's content is copied.
Cut & Paste
For a true separation, swipe down with three fingers on the canvas to open the quick menu, then choose Cut & Paste. The selected content moves to a new layer and is removed from the original. You can then adjust it independently.
A color-separation workflow
Combining Automatic with Cut & Paste gives you a quick way to split a flat illustration by color:
- Select the layer containing the flattened art.
- Choose Automatic and tap the color you want to isolate.
- Adjust the threshold until the whole region is selected.
- Three-finger swipe down and choose Cut & Paste.
- Repeat for each color or element you need.
You end up with separate layers for skin, shadow, line, or background that can be recolored, animated, or exported on their own.
Selection tips for motion and VFX workflows
Procreate is a raster painting tool, so its selections are pixel-based and not editable as paths. Plan around that.
- Work at final resolution. Selections and transformations resample pixels. Scaling a selection up softens it, so build assets at or above the size you will animate them.
- Name and organize layers before export. If you export a layered PSD for After Effects, clear layer names save time when you rebuild the comp. Separate moving parts such as limbs, eyes, and props onto their own layers.
- Use Invert for cleanup. To remove stray marks around a subject, select the subject, invert, and erase.
- Keep a backup layer. Use Copy & Paste instead of Cut & Paste when you may need the original pixels later. Selections are not a substitute for non-destructive editing.
- Mind the animation tool. Procreate Dreams has its own Select tool that works on drawings and flipbook frames and offers the same four modes plus Add, Remove, Invert, Copy & Paste, Color Fill, and Clear. If you animate in Dreams, the same habits apply.
Where Procreate selections end and other tools begin
The Select tool is excellent for isolating and rearranging hand-drawn art, but it is not built for everything. Selecting a complex subject from a photographic or painterly background, restyling a whole frame, or turning a flat drawing into moving footage goes beyond what manual selection does well.
That is where a tool like can sit downstream of your Procreate work. You can bring in frames you've isolated and cleaned up in Procreate and use them as the starting point for an AI-assisted step. Procreate remains the place where you draw and prep.
Quick reference
Common problems and fixes
The selection won't copy anything. The wrong layer is active. Select the layer that holds the content and try again.
Automatic selects too much or too little. Tap and hold, then drag left to tighten or right to loosen the threshold. If it still leaks, switch to Freehand and use Remove to trim.
Edges look jagged after moving a selection. Add a small amount of Feather before transforming, or redraw the edge after placing the element.
You can't tell what's selected. Increase the selection mask visibility in settings, or zoom in and check the moving diagonal lines.
Once the four modes and the Add, Remove, Invert, and Feather controls are second nature, the Select tool becomes a quick way to prep clean, separated assets, whether they head to After Effects, Procreate Dreams, or an AI-assisted motion step.