How to Use Procreate to Remove Background
StyleFrame Team8 min read
Procreate has no dedicated Remove Background button, so you remove a background with its Selections tool: trace the subject with Freehand, or tap the background with Automatic, then Invert if needed and clear the selection. Hide the Background Color layer and export as a PNG or layered PSD, and the transparency carries into other apps that read alpha. This works well for illustrations, scans, and flat-color assets, but it is a manual process and is not built for photographic subjects or video footage.
What Procreate Can and Can't Do for Background Removal
Procreate treats background removal as a selection task. You define what to keep or discard, then delete the rest. There is no subject-detection step and no matte generation. The quality of your result depends on how carefully you select and how clean your source is.
That makes it a good fit for:
- Hand-drawn elements, sketches, and scanned artwork on white paper
- Flat-color or high-contrast graphics
- Stickers, textures, and cutout assets for collage-style animation
- Quick isolation of a single object from a reference sheet
It is a poor fit for fine hair, motion blur, semi-transparent edges, or anything that needs a matte per frame.
Before You Start: Prep the Canvas
A few minutes of setup prevents most cleanup later.
- Duplicate your image layer. Work on the copy and keep the original hidden underneath. If a selection goes wrong, you still have the source.
- Toggle off Background Color. In the Layers panel, switch off the Background Color layer so you see the checkerboard instead of white. This is the only way to judge whether the background is actually gone.
- Match your canvas to your destination. If the asset is headed for a 4K comp, create or resize the canvas accordingly. Use Actions → Canvas → Crop & Resize, and toggle Resample if you want the artwork scaled with the canvas. Resampling uses bicubic interpolation, so enlarging a small image will not add detail.
- Zoom in. Selections made at fit-to-screen zoom look fine until you composite them over a different background.
Method 1: Freehand Selection and Invert
Use this when the subject has a defined shape but the background is busy or has a similar color.
- Select your image layer and tap the Selections tool (the S icon).
- Choose Freehand and make sure Add is active.
- Zoom in and trace around the part you want to keep. Pick a starting point on a clean edge.
- Close the loop by returning to your start point. You can also leave the loop open, or tap the starting dot. If tapping fills the shape unexpectedly, undo with a two-finger tap and continue.
- If you need to select the background rather than the subject, tap Invert.
- Scrub three fingers left and right on the canvas to clear the selection.
For rough work you can combine Ellipse, Rectangle, and Freehand selections. Use Rectangle or Ellipse for regular shapes and Freehand for organic edges. Tracing is slow, but it gives you full control over the outline, which matters when the subject has a distinct silhouette.
Method 2: Automatic Selection for White or Flat Backgrounds
This is the fastest route for scans, sketches, and illustrations on solid backgrounds.
- Open the Selections tool and choose Automatic with Add enabled.
- Tap the background area you want to remove.
- Keep your pen or finger held down after tapping, then drag left or right to adjust the threshold. Moving one way grows the selection into similar colors, and moving the other way tightens it.
- Tap additional areas to add them, for example enclosed white pockets inside a shape.
- Open the Actions (wrench) menu and choose Cut, or use the three-finger clear gesture.
A common stumbling block is that Automatic Selection acts on the active layer. If you tap a background that's on a different layer, or if everything is merged with a solid background color layer, the result will not behave as expected. If the whole picture disappears, deselect, confirm you have the right layer active, and try again.
The threshold does not need to be perfect. Aim for removing most of the background, then clean up leftovers by hand. Textured surfaces such as watercolor paper or paper grain make the threshold harder to set because the "white" actually varies. In those cases, expect to redo the selection a couple of times, and consider combining Automatic with a Freehand pass.
Method 3: Use a Layer Mask for Non-Destructive Removal
Cutting pixels is permanent once you merge or export. If you may need to restore edges later, mask instead.
- Make a selection of the subject using Freehand or Automatic.
- Tap the layer thumbnail and choose Mask.
- Paint on the mask with black to hide pixels and white to reveal them. Brush edges can be softened for gentler transitions.
- Merge the mask into the layer only when you're happy with the result.
A mask also lets you refine edges over several passes instead of committing to one selection. If you're iterating on a character or prop that will be revised, keep the mask live and export from it.
Clean Up Edges and Leftover Pixels
After any method, you will usually have leftovers: stray specks, halos of the old background color, or jagged edges.
- Eraser with a hard brush gives clean, predictable removal of small specks.
- Zoom in and check against a dark color. Add a temporary dark layer beneath your subject. White halos that are invisible on white show up immediately on dark.
- Check on a mid-tone too. A light-colored fringe that survives a dark check can still show against a colored scene.
- Feather the selection slightly if the edge looks too hard when composited. Do this before you clear, not after.
- Check inside holes. Gaps in handles, loops, and enclosed shapes often retain background pixels.
Export With Transparency for Compositing Tools
Transparency only survives certain formats.
- Turn off the Background Color layer and any other layers you don't want in the output.
- Open Actions → Share.
- Choose PNG for a flat image with an alpha channel, or PSD to keep layers separate.
- Avoid JPEG. It does not support transparency, and your cut-out will export with a solid background.
In your compositing or 3D app, check whether the alpha is read as straight or premultiplied, and match it to your export. If you see dark or light fringes around the edges, that can be an alpha interpretation mismatch rather than a bad selection. A PSD keeps layers separate, so you can animate parts independently.
Where Procreate Falls Short for Motion Work
For a single still, Procreate is capable. For motion pipelines, the limits show up quickly:
- Stills only. There is no tool for removing a background from a video clip across frames.
- Manual consistency. Even if you export a sequence of frames, each one would need to be selected by hand, and edges will vary frame to frame.
- Resolution ceiling. Resampling does not create detail, and a small source stays small.
- Edge quality. Soft or translucent edges need hand painting, and there is no matte refinement.
For hero stills, logos, hand-drawn elements, and quick props, Procreate is an easy answer. For footage or generated sequences, you'll want something built for it.
Where Styleframe Fits in the Workflow
If your cutout needs extend beyond a single hand-selected still, Styleframe is an AI video and motion tool built for artist control.
A practical split: use Procreate to draw or clean a hero asset by hand, then bring it into Styleframe when you need to take it into motion. You keep your existing comp structure rather than rebuilding it around a new tool.
Troubleshooting Common Problems
The whole image disappears when I cut. You probably had no active selection, or you selected the subject instead of the background. Undo, check the selection, and use Invert if needed.
White fringes remain around the edges. Tighten the Automatic threshold, shrink the selection slightly, or erase the halo by hand with a hard brush. Verify against a dark backdrop.
The background is still white after export. Background Color was left on, or you exported as JPEG. Turn it off and export as PNG.
Automatic Selection grabs parts of the subject. The subject contains colors similar to the background. Lower the threshold, or switch to Freehand for that region.
The cutout looks different in my compositing app. Check how the app interprets the alpha and confirm your project's color settings.
Summary
To remove a background in Procreate, isolate what you want with the Selections tool, using Freehand tracing for shaped subjects or Automatic Selection for flat and white backgrounds, then clear or mask the rest. Clean the edges against both a dark and a mid-tone backdrop, hide the Background Color layer, and export as PNG or PSD to preserve transparency. It is a dependable approach for illustrated assets. When the job moves to footage or sequences, treat Procreate as the place to prepare and finish stills, and hand motion work to tools built for it.