How to Use Procreate to Letter
StyleFrame Team9 min read
To letter in Procreate, create a high-resolution canvas, sketch your composition on a loose layer, and ink the final letterforms on a separate layer with a pressure-sensitive brush such as Brush Pen or a stabilized inking brush. Use the Text tool and Drawing Guides to keep spacing and proportions clean, and use stabilization to smooth curves. Then export the lettering as a layered PSD or transparent PNG so it can be animated in After Effects.
What You Need Before You Start
Procreate runs only on iPad, and an Apple Pencil is effectively required for serious lettering because it gives you pressure sensitivity. You can start with a finger, but you won't get thick-to-thin stroke variation. Procreate is a one-time purchase rather than a subscription. Procreate Pocket on iPhone is a lighter version.
Optional accessories like a matte screen protector add friction and can help stroke control. Treat them as personal preference, not a requirement.
If your end goal is motion, decide that now. Lettering you plan to animate should be built differently from lettering you plan to print, and the next sections point out where.
Set Up the Canvas
Tap the "+" icon in the gallery and create a custom canvas. For print-oriented work, 300 DPI at a size like 3000 × 2000 px is a sensible starting point. For motion work, match the pixel dimensions of your composition, or go larger so you can scale the lettering in After Effects without softening it. A 4K-wide canvas gives you room to push in.
Two settings matter more than they seem:
- Color profile: Choose RGB for anything that will live on a screen. CMYK is for print. Video work should be RGB.
- Layer limit: Procreate sets the maximum number of layers from your canvas size and device. Larger canvases mean fewer layers. If you plan to keep every letter on its own layer, balance resolution against layer count before you start.
Sketch and Compose First
Treat lettering as illustration, not handwriting. Start with a thumbnail sketch in a bright color on its own layer. Pick any sketching brush, such as a pencil or the built-in Peppermint brush.
- Write out the phrase.
- Underline the words that carry the most weight. These get the largest or most expressive treatment.
- Sketch several layouts quickly, putting words on different lines and testing different containers such as rectangles or curves.
- Mix styles when it helps, for example a cursive word against block capitals.
Keep these sketches fast and ugly. You are deciding hierarchy and line breaks, not drawing finished letters. When one layout wins, select it, copy it to a new layer, center it on the canvas, and lower its opacity so it becomes a guide for inking.
If a line of text comes out wonky, the Warp tool in Transform can straighten or reshape it without redrawing. Tools like this are a big reason digital lettering is forgiving.
Use the Text Tool for Traceable Bases
You don't have to draw every letter from scratch. Procreate's Text tool, found under Actions > Add > Add Text, gives you a clean structural base.
- Type your text and choose a font that suits the style. Even simple fonts make good skeletons for block or bubble letters.
- Adjust the layout on the canvas. Text starts as editable vector, so you can change font, spacing, and alignment freely.
- Lower the text layer's opacity, lock it in place, and trace over it on a new layer.
Vector text stays crisp when resized, but many of Procreate's tools require rasterizing it first. Rasterizing turns the text into a normal pixel layer you can paint, distort, and merge. Finalize your wording and layout before you rasterize, because you lose the ability to retype afterward.
Check your spelling before tracing. It's easy to miss a typo when you're focused on shapes, and fixing it after inking costs more time than it should.
Keep Spacing Consistent With Drawing Guides
Open Actions (wrench icon) > Canvas > Drawing Guide to turn on a grid, then adjust its size to match the scale of your letters. A grid helps with baseline, x-height, and consistent letter width, especially in block lettering. For angled or curved layouts, the Symmetry tool or a custom grid can help.
For block lettering with straight edges, draw a line and hold the pencil down at the end so QuickShape snaps it straight. Holding a second finger on the screen constrains it to perfect horizontals and verticals. Delete any overlap with the eraser, which is itself a brush with adjustable size and softness.
Ink the Final Letterforms
Create a new layer above your sketch or traceable base and ink on it. The brush you choose shapes the result:
- Monoline keeps the same width no matter how hard you press. It suits uniform, modern lettering.
- Brush Pen responds to pressure, so downstrokes get thicker and upstrokes thinner. It suits script and calligraphy-style work.
Not every brush is pressure sensitive, so test a few before committing.
Smooth Shaky Curves With Stabilization
Procreate is sensitive enough that curves can pick up small wobbles. Open the brush settings, find Stabilization, and raise the amount. Around 60 percent is a reasonable starting point. Go much higher and the brush becomes hard to use because it stops following the path of your hand. If a brush overcorrects your movement, lower the value. Sketching brushes with no stabilization follow your natural handwriting most closely.
Fix Stroke Starts and Ends
If you want flat, clean terminals like those from a brush pen, pause for a moment before you drag and again before you lift. Lift straight up or back into the stroke. Lifting away from the stroke tends to leave a small point or bump. If you do want tapered ends, use gradual pressure instead.
Work in Layers
Keep sketch, guide, ink, color, and shadow on separate layers. For lettering that will be animated, go a step further and put each word, or even each letter, on its own layer. This costs a little planning but saves you from painful re-cutting later.
Add Color, Shadow, and Detail
Once the ink is clean, use Alpha Lock or Clipping Masks to color letters without spilling outside the lines. Clipping Masks and Layer Masks work on both vector and raster text. Add:
- Drop shadows or extrusions on separate layers beneath the letters.
- Texture on a clipped layer above the fill, so you can toggle or replace it.
- Ligatures and flourishes on their own layers so they can be animated independently.
Procreate also has Animation Assist for frame-by-frame animation inside the app. For most motion designers, though, it's more useful as a quick test than as a final tool, since the real work happens in After Effects.
Export for an After Effects Pipeline
How you export decides how pleasant the animation stage will be.
- Layered PSD: Export as PSD to preserve layers, then import into After Effects as a composition with layers retained. This lets you animate each letter or flourish separately.
- Transparent PNG: Hide the background layer before exporting if you need a single flat piece with transparency.
- Resolution: Export at the size you'll actually use, or larger. Raster lettering that's scaled up in comp will look soft.
- Naming: Rename layers in Procreate before export. Names like "word2_shadow" will save you from digging through "Layer 47" later.
In After Effects, common approaches include a Trim Paths–style reveal on a traced vector version, masked wipes that follow the stroke order, or per-letter position and scale animation using the separate layers. Because Procreate output is raster, a true write-on reveal usually means redrawing or tracing the path as a shape layer, or animating a mask along the stroke.
Where Styleframe Fits After the Lettering
Once your lettering exists as clean artwork, you may want to push it into a look, or into motion, that would be slow to build by hand. is an AI video and motion tool built for artistic control rather than one-click output. It's most relevant here in a few specific steps:
- Restyle and Ink-and-Paint: These use reference-driven style transfer. You can feed in a reference image and apply a painted, inked, or textured treatment to your lettering while keeping your own letterforms as the driver.
- Frames-to-Video: Set keyframes, such as lettering at the start and a styled version at the end, and generate the motion between them, guided by your references rather than a text prompt alone.
- Remove Background and 4K Upscale: Isolate lettering from a backdrop, or bring a smaller export up to production-ready 4K.
- 2D-to-3D and Turntable: Turn flat lettering into a dimensional object and rotate it, useful for title concepts before you commit to a Cinema 4D or Blender build.
Iteration is non-destructive, so you can try several looks from the same source. Styleframe exports image sequences, which drop straight into After Effects or Nuke. Your compositing workflow stays intact. Styleframe supplies material to composite, not a replacement for the comp.
Common Mistakes to Avoid
- Skipping the sketch. Jumping straight to inking usually produces awkward line breaks and weak hierarchy.
- Over-stabilizing. Very high stabilization makes strokes feel disconnected from your hand.
- Rasterizing text too early. You lose retyping and font changes.
- Working at screen size for motion. You'll hit resolution limits as soon as you scale or push in.
- Flattening layers before export. Separate layers are what make the lettering animatable.
A Simple Workflow to Repeat
- Create an RGB canvas sized for your final use.
- Sketch layouts quickly and pick one.
- Build a traceable base with the Text tool or Drawing Guides.
- Ink on a new layer with a suitable brush and stabilization around 60 percent.
- Color, shade, and detail on separate layers.
- Name layers and export as PSD or transparent PNG.
- Animate in After Effects, and use a tool like Styleframe if you want to explore stylized or generated variations from your finished artwork.
Procreate's lettering tools are simple, but the habits around them (planning, layering, naming, exporting) are what make the results usable in a professional motion pipeline.