How to Use Procreate to Creat Stickers
StyleFrame Team8 min read
To make stickers in Procreate, set up a canvas at 300 DPI, draw each design on its own layer with the background turned off, and build a bold outline layer underneath the artwork. Then export the result as a transparent PNG. For printing and cutting, keep a separate cut-line layer so a print shop or cutting machine can follow the shape of the sticker.
This guide covers the full process, from canvas setup to export, and then shows how motion designers can animate the stickers or carry them into After Effects.
Before You Start: What Procreate Does and Doesn't Do
Procreate is an iPad drawing app, so everything here assumes an iPad and ideally an Apple Pencil. It is a raster tool, which has two consequences for sticker work:
- Your resolution is locked in when you create the canvas. Scaling up later softens linework.
- Procreate isn't designed as a dedicated die-cut tool, so plan to create the sticker border and cut line yourself with layers, selections, or a hand-drawn outline.
If you only need digital stickers for chat apps, video overlays, or social posts, the transparent PNG is your finished file. If you want physical stickers, you add print and cut steps afterward.
Step 1: Set Up the Canvas
Tap the plus icon in the Gallery and create a custom canvas. For stickers, these settings hold up well:
- Size: Work larger than your final output. A 3000 × 3000 px canvas gives you room to scale down for most sticker sizes without losing detail.
- DPI: 300 for anything that may be printed. Pixel dimensions matter more than the DPI label, but 300 keeps your print math simple (a 3-inch sticker needs about 900 px).
- Color profile: RGB is fine for digital use. If a printer asks for CMYK, check their requirements before you start.
Open the Layers panel and turn off Background color. The checkerboard behind your layers tells you transparency is preserved, and this is what keeps the sticker's surroundings clear on export.
Step 2: Draw Each Sticker on Its Own Layer
Work non-destructively from the start. Put every sticker, or every major element within a sticker, on its own layer. That makes it easy to rearrange a sticker sheet, recolor pieces, or send elements to After Effects later.
A reliable layer structure:
- Sketch (low opacity, hidden before export)
- Linework
- Flat color
- Shading and highlights
- Sticker border (white, below everything else)
- Cut line (separate, hidden by default)
A few Procreate features make this faster:
- StreamLine in the brush settings smooths wobbly lines so your outlines stay clean.
- Alpha Lock lets you recolor or shade inside a layer's existing shape without spilling over the edges.
- Clipping masks keep shading and texture contained within the flat color layer below.
- Color Drop fills regions quickly, but close gaps in your linework first or the fill will leak.
- Drawing Guide with Symmetry helps with badges, mascots, and anything built on a mirrored shape.
Keep sticker designs bold. Small details disappear at 2–3 inches, so thick lines, high contrast, and simple shapes read better than intricate rendering.
Step 3: Build the White Sticker Border
The border is what makes a drawing look like a sticker. There are two common ways to make it.
Method A: Duplicate and Expand
- Merge your sticker's visible layers into one layer, or duplicate the group and flatten the copy. Keep the originals.
- Place the flattened copy below the artwork.
- Turn on Alpha Lock for that layer and fill it with white. (Drag a white color swatch onto the layer, or use Fill Layer.)
- Turn Alpha Lock off, then apply a Gaussian Blur from the Adjustments menu. This spreads the shape outward into a soft halo.
- Duplicate the blurred layer and merge the copies together a few times. Stacking the semi-transparent edges builds the opacity back up and hardens the border.
- Check the edge at full zoom. If it still looks fuzzy, repeat the stack-and-merge step.
The exact blur amount depends on your canvas size and how thick you want the border. Test on a duplicate so you can compare results.
Method B: Hand-Drawn Border
For a more illustrated look, draw the outline by hand on a new layer beneath the artwork. Use a solid round brush with StreamLine turned up, trace around the design with a consistent offset, and then fill the inside with ColorDrop. This gives you a slightly wobbly, organic border, which suits hand-lettered or cartoon styles. It is also easier to adjust, since you can erase and redraw sections.
Whichever method you pick, smooth out sharp inner corners and tiny gaps where the border pinches between parts of the design. Those spots cause problems for cutting machines.
Step 4: Create a Cut Line
If you are printing physical stickers, make a dedicated cut-line layer:
- Duplicate your finished white-border layer.
- Fill it with a flat, distinct color, such as magenta.
- Hide it by default and export it separately.
A print shop or a cutting workflow can use this as a path reference. Many sticker printers also want the cut line as a vector, in which case you would trace the exported shape in Illustrator or a similar vector tool. Check your printer's file specs before you finalize the design, because requirements for bleed, margins, and file format differ between services.
Step 5: Export the Stickers
Use the Share menu in the Actions tool (the wrench icon) and choose the format that matches your goal:
- PNG keeps transparency and is the standard for individual stickers, overlays, and messaging-app sticker packs.
- PSD can preserve your layers so you can open the file in other editing or compositing software with the structure intact.
- TIFF or PDF may suit certain print workflows.
- JPEG will not preserve transparency, so avoid it for stickers.
To export individual stickers from a sheet, hide everything except one sticker's layers, export, and repeat. Or place each sticker on its own canvas and export one by one. Name files clearly (for example, fox_wave_v02.png) because sticker packs get messy fast.
Before sending files out, zoom to 100% on a dark background and a light background. Stray light pixels on the border often show up only against dark.
Step 6: Make Animated Stickers
Procreate's Animation Assist can turn layers into frames, which works well for simple looping stickers: blinking, bouncing, waving. From there you can:
- Adjust frame rate and onion-skin settings.
- Preview the loop directly in the canvas.
- Export an animation. Available animated formats vary by version, so check which ones your copy supports.
Animated GIFs have limited color and transparency support, so edges can look jagged. A PNG sequence generally retains better edge quality and transparency. Keep loops short and seamless, and keep the border consistent between frames so the sticker doesn't jitter.
Procreate also has a separate timeline-based animation app, Procreate Dreams. For heavy motion work, though, many professionals will move the artwork into their usual compositing tool.
Moving Sticker Art Into After Effects
For motion designers, Procreate is often the front end, not the finish line. A clean handoff makes the difference:
- Export a layered PSD, then import it into After Effects with layers intact. Your linework, color, and border stay separate, so you can animate each independently.
- Keep layers organized and named before exporting. "Layer 14 copy 3" is not helpful at 2 a.m.
- Work at the final resolution, or larger. If the sticker will animate with a scale-up, build the canvas big enough that it stays sharp.
- Rasterized strokes can't be edited once in After Effects. Fix wobble and gaps in Procreate first.
- Export a PNG sequence rather than a GIF if your animation is hand-drawn and will be composited over footage. The sequence preserves transparency.
From there, standard techniques apply: puppet pins for squash and stretch, shape layers for secondary elements, expressions for loops, and a drop shadow or stroke effect that sits naturally over your footage.
Extending Sticker Art with Styleframe
Once you have a set of stickers with a consistent look, AI video and motion tools such as Styleframe may help you push that look into motion without redrawing every frame. Check the tool's current documentation for its supported features, export formats, and integrations before building it into your workflow.
Some practical uses to look for in a tool like this:
- Using keyframes, such as your sticker in two or three poses, to guide an animation between them.
- Using a sticker or sheet as a style reference for video clips.
- Isolating subjects when you want to turn footage into sticker-style cutouts.
- Upscaling lower-resolution outputs.
Treat generated output like any other asset. Review edges, check consistency against your original sticker, and clean up in comp where needed.
Common Mistakes to Avoid
- Working too small. A 1000 px canvas will look soft when printed or scaled.
- Forgetting to turn off the background. You'll export a white rectangle instead of a transparent sticker.
- Flattening too early. Keep an unflattened copy so you can revise.
- Thin borders. A border that is too slim can be lost in cutting tolerances.
- Detail overload. Stickers are viewed small. Simplify.
- Skipping a test print. Screens and printers disagree on color, so check a proof before ordering a big batch.
Quick Workflow Recap
- Create a large 300 DPI canvas and disable the background color.
- Draw each sticker on organized layers.
- Build a clean white border beneath the artwork.
- Create a separate cut-line layer for printing.
- Export transparent PNGs, or a PSD or PNG sequence for animation.
- Animate in Procreate for simple loops, or bring layers into After Effects for more control.
- Extend the style into motion with reference-driven tools where it saves time.
With a consistent layer structure and a clean export routine, one Procreate file can serve as a printed sticker, a messaging pack, an overlay for video, and the starting point for animation.