How to Use Procreate for Stickers
StyleFrame Team7 min read
Procreate makes stickers in five steps. Set up a 300 ppi canvas at your final print size, draw each design on its own layers, add a solid outline layer beneath the artwork, and export a transparent PNG or a print-ready sheet. Then print and cut at home, send the file to a sticker printer, or use the PNG as a digital sticker. The same layered, transparent artwork also works as source material for motion projects.
Before You Open Procreate: Decide What the Sticker Is For
The target output changes your canvas, color, and export settings, so decide it first.
- Printed stickers (home printer or Cricut/Silhouette): you need a print-resolution canvas and a defined cutline.
- Professionally printed stickers: you need the same canvas, but check the printer's template and color requirements. Some printers add the cutline for you, others expect you to supply it.
- Digital stickers (GoodNotes, planners, messaging apps): you need a transparent PNG at a sensible pixel size. Print color settings don't matter.
- Animated or motion stickers: you need clean alpha edges and separated elements, which is what a compositor wants anyway.
Step 1: Set Up the Canvas
Procreate has no rulers, so you have to set physical size and resolution when you create the document.
- Tap + to create a new canvas, then the folder-style custom canvas icon.
- Enter your dimensions in inches. For a full sheet of stickers, US Letter (8.5 × 11 in) is a practical default. For a single sticker, work at the final size or a bit larger. Common finished sizes run from roughly 2.5 to 5 inches.
- Set DPI to 300. Lower values look soft when printed.
- Choose a color profile. Generic CMYK is a reasonable choice for print jobs because it helps avoid oversaturated surprises. For digital-only stickers, stay in RGB.
If you're printing and cutting with a Cricut, build the canvas around the machine's limits. Print-then-cut software caps the printable area, so a canvas such as 9 × 7 inches lets you design at the size you'll actually cut. Check your cutter's current maximum before settling on dimensions.
Build a Size Reference
Because you can't measure on canvas, draw a reusable guide. Turn on the Drawing Guide and set the grid to one inch. Alternatively, trace a 2 × 2 inch square on its own layer with a monoline brush. Duplicate it to plan how many stickers fit across and down, then lower its opacity so it doesn't distract while you draw. Hide it before you export.
Step 2: Draw Each Sticker on Separate Layers
Treat the file as a layered comp, not a flat painting.
- Put line art, flat color, shading, and texture on different layers. Group them per sticker.
- Keep text on its own layer until you're sure about the wording.
- Use a sketch layer at low opacity, then ink and color above it.
- Name your groups. When you have twelve stickers on a sheet, "Popsicle 3" saves time.
Brush choice is a style decision, not a technical one. Monoline and marker-style brushes give you clean, graphic shapes that survive small print sizes. Textured brushes such as colored pencil look good on screen, but fine grain can disappear or turn muddy at 2 inches. Test one sticker at real size before you finish the whole set.
Before you do anything destructive, duplicate the document. Keep the layered original as your master and flatten only in the copy.
Step 3: Create the Outline and Cutline
A sticker needs a border: usually a white or colored margin around the artwork that gives the cutter some tolerance. There are two reliable ways to make one in Procreate.
Option A: Trace It with a Brush
- Create a new layer below your artwork.
- Pick a monoline brush (found under Calligraphy) and a border color. White is the classic choice.
- Draw a smooth shape around the design, then fill it with the same color.
This works well for simple, blobby shapes and gives you full control over the contour.
Option B: Blur and Harden
This is better for complicated silhouettes like tags, scripts, or characters with limbs.
- Merge each sticker's layers into one layer (in your flattened copy), then duplicate it.
- On the lower duplicate, turn on Alpha Lock and use Fill Layer with your border color. Turn Alpha Lock off.
- Open Adjustments → Gaussian Blur and slide until the halo reaches the margin you want.
- Use the Selection tool in Automatic mode with Color Fill, and tap inside the blurred area, dragging until the soft edge fills in solid.
The result is an expanded, smooth border. Check the contour for sharp inner notches, which are difficult for a cutter blade to follow, and round them off by hand.
Separate the Cutline from the Border
If a printer or cutting machine wants a cutline, keep it as a distinct layer or export it separately. Many workflows use the outer contour of the border layer as the cut path. Ask your printer what format they want. Some accept a flat PNG, others want a separate vector path or a specific spot color.
Step 4: Lay Out and Export
Single Stickers
Hide the background color so the canvas shows the checkerboard. Then go to Actions → Share → PNG. PNG preserves transparency. JPEG fills the transparent area with a background, so avoid it for stickers.
Sticker Sheets
Arrange the finished stickers on one canvas with consistent spacing, so the cutter has a clear gap between each border. Keep sticker spacing generous, and keep a safe margin from the canvas edge. Export the sheet as PNG, or PDF if your printer prefers it. Procreate also exports PSD, which is useful if you want to hand the layered file to someone working in Photoshop.
Digital Stickers
For GoodNotes and similar apps, export each sticker as a trimmed transparent PNG. Cropping tightly makes them easier to place. Drop the white border if you don't want a printed-sticker look.
Step 5: Print and Cut
- At home: print on sticker paper at the highest quality setting, then cut by hand or with a cutting machine.
- With a Cricut or Silhouette: upload the PNG into the machine's software, use print-then-cut, and let it detect the contour from the border. Keep the artwork close to its final size to avoid scaling errors.
- With a print shop: upload your files to a custom-sticker service, choose material, finish, and shape, and follow its guidance on bleed and cutlines.
Print one test sheet before a full run. Colors on an iPad display almost always look more luminous than on paper, so adjust saturation and contrast based on the proof, not the screen.
Common Mistakes to Avoid
- Working too small. Low resolution can't be recovered later.
- Flattening the only copy. Always keep the layered master.
- Hairline details. Thin strokes and tiny text disappear when printed small.
- Overly intricate cutlines. Sharp inner corners and narrow gaps are hard to cut cleanly.
- Skipping the proof. Screen colors and printed colors differ.
- Exporting JPEG. You lose transparency.
Taking Sticker Art into Motion Work
If you're a motion designer, Procreate sticker art is useful beyond print. A clean illustration with a transparent background and separated layers is a good starting point for animation software, where you can animate the layers separately. For a quick pass:
- Export the layered PSD and import it into your animation or compositing software.
- Animate the border layer separately for a peel-and-wiggle sticker effect.
- Add a drop shadow and a subtle highlight pass to sell the physical feel.
Quick Reference Workflow
- Choose output: print, digital, or motion.
- Create a 300 ppi canvas at final size.
- Draw on grouped, named layers.
- Duplicate the document and flatten the copy.
- Add a border using the brush or blur-and-harden method.
- Export transparent PNGs or a sheet layout.
- Proof a test print, then cut.
FAQ
What canvas size should I use for stickers in Procreate? Match the finished sticker size, at 300 ppi. For a full sheet, US Letter is a common starting point. If you're using a cutting machine, fit within its print-then-cut area.
Can I make stickers in Procreate without a cutting machine? Yes. You can print on sticker paper and cut by hand, order from a print shop, or use the PNGs digitally.
Which export format is best? PNG for transparent single stickers and sheets. PDF is useful when a printer asks for it, and PSD preserves layers for further editing.
Can I animate Procreate stickers? Yes, either with Procreate's own animation tools or by bringing layered exports into animation software, where you may have more control over timing and effects.