How to Use Procreate for Lettering
StyleFrame Team8 min read
Open Procreate on an iPad with an Apple Pencil, create a canvas at your delivery resolution, sketch the word on its own layer, then ink clean letterforms on a separate layer with a stabilized brush. Use Drawing Guides, Quickshape, and the text tool as traceable bases to keep spacing consistent. Finish with color, shadow, and texture on separate layers. For motion work, export a layered PSD or transparent PNGs so each letter or word can be animated in After Effects.
Why Procreate Works for Motion Designers
Procreate is a one-time-purchase illustration app that runs only on iPad. It is not a motion tool, but it is fast for drawing letterforms you cannot get from a font: uneven brush scripts, ink-bleed titles, hand-cut block letters, and expressive title cards.
For a motion designer, the lettering is raw material. The goal is clean, separated artwork you can rig, track, and animate elsewhere. Every setup decision below follows from that.
What You Need Before You Start
- An iPad that supports Apple Pencil. Pressure sensitivity controls line weight, which matters for thick-and-thin strokes.
- Procreate. The full app is iPad-only. Procreate Pocket is the lighter iPhone version.
- Optional: a matte screen protector for friction and stroke control, and a stand for long sessions.
Third-party brushes are optional. Procreate's built-in Monoline and Brush Pen brushes cover most lettering styles. Monoline keeps a constant stroke width, while Brush Pen responds to pressure. Knowing that difference up front saves you from fighting a brush that is not pressure sensitive.
Step 1: Set Up the Canvas for Your Delivery Format
Tap the "+" icon in the gallery and choose a custom canvas. Your settings depend on where the lettering ends up:
- Video titles and lower thirds: match your composition. A 3840×2160 canvas is a sensible starting point for a UHD comp, and drawing larger than final size gives you room to scale in After Effects without softening edges.
- Print or poster use: 300 DPI is a common choice for high-quality output.
- Color profile: choose RGB for anything that lives on screen. CMYK is for print.
Larger canvases reduce the number of layers Procreate allows, and the app shows you the maximum when you configure the canvas. If you plan to separate every letter onto its own layer, check that number before committing to a very large canvas. A moderately sized canvas with more layers is often the better trade.
Step 2: Sketch Composition on a Rough Layer
Treat lettering as illustration, not as text on a line. Start with thumbnail sketches in a bright color such as red so you can see it clearly against later ink.
- Write the phrase and underline the words that carry the meaning.
- Try several layouts: different line breaks, stacked words, a script word wrapped by block letters.
- Pick the strongest layout and move it to its own layer.
- Lower that layer's opacity and create a new layer above it for refinement.
For a motion designer, composition is also a timing decision. The words you emphasize in the layout are usually the ones that will land on a beat in the animation, so decide that now.
Step 3: Use Guides and Text Bases for Structure
Procreate gives you several ways to keep geometry consistent.
Drawing Guide
Open Actions (the wrench icon), then Canvas, then Drawing Guide. Adjust the grid size to match the scale of your letters. A grid keeps baselines, x-heights, and spacing even. For angled or curved layouts, try the Symmetry tool or a custom grid.
Text tool as a traceable base
Type your word with the text tool in a font that suits the style, lower the layer's opacity, and trace on a new layer. This works well for block and bubble letters, where proportion matters more than a hand-drawn wobble. Typing and tracing is also a quick way to lay out longer lines without worrying about spacing.
Proofread before tracing. A typo found after you have inked and colored every letter is expensive to fix.
Quickshape
For rectangles, straight rules, and underlines, draw the line and hold the pencil down until it snaps. Holding a finger on the screen constrains it to a clean angle. If a block-lettered word comes out slightly crooked, the Transform tool's Warp option can straighten it.
Step 4: Ink Clean Letterforms
Create a new layer above the sketch and ink the final shapes. Settings that help:
- Stabilization: open the brush settings and increase the Stabilization amount to smooth shaky curves. A value around 60 is a reasonable starting point. Higher values lag behind your hand and make the brush harder to control.
- Brush choice: use a pressure-sensitive brush for calligraphic contrast and a monoline brush for uniform geometric type.
- Stroke endings: if your terminals come out pointed or bumpy, pause briefly before lifting the pencil, and lift straight up or back into the stroke. Pausing briefly before starting the stroke also helps keep the top edge flat.
- Zoom in for tight curves and joins. Small corrections at high zoom keep edges clean after you scale up in a composition.
Ink one letter or word per layer where you can. It takes more setup, but it pays off later when you need to stagger a reveal.
Step 5: Add Color, Shadow, and Texture on Separate Layers
Keep the base shape clean and build everything else around it:
- Alpha Lock or clipping masks let you color and texture the lettering without touching the line work or spilling past the edges.
- Blend modes and opacity give you shading, highlights, and drop shadows. A subtle shadow or gradient fill helps letters separate from the background.
- Embellishments like flourishes, stars, or ligatures go on their own layers so you can animate or remove them independently.
The same rule applies throughout: if you might want to change or animate it separately, give it its own layer. Merging is easy. Splitting a flattened image is not.
Step 6: Export for After Effects and Other Tools
Procreate exports in several formats. Match the format to the next step in your pipeline.
- PSD: keeps your layer structure. Import it into After Effects as a composition with layers retained, then animate each letter, word, or flourish independently.
- Transparent PNG: hide the background layer first and export for single elements with alpha.
Before leaving Procreate, check three things: the background layer is hidden if you need transparency, the layer names make sense, and the canvas is large enough to survive the scaling you plan to do in your comp. A layer called "Layer 47" is a small problem now and a bigger one at 2 a.m. before delivery.
Taking Procreate Lettering Into Motion
Once the lettering is in After Effects, the standard tools apply: shape layers for masks and trim paths, puppet tools for bending, expressions for staggering, and Cinema 4D or Blender if you want extruded letters. A hand-drawn word with clean layers can go into any of them.
Hand-drawn lettering is also a strong source for generative and style-driven tools. This is where Styleframe fits. It is an AI video and motion tool built around artistic control rather than one-click generation. Each generation is driven by your own reference images, video clips, and keyframes, so your lettering stays the source of truth.
Some practical ways to use it with Procreate artwork:
- Frames-to-Video: use lettering stills as keyframes and generate the motion between them, such as a word transforming from one treatment to another. You control the start and end frames instead of describing them in a prompt.
- Restyle and Ink-and-Paint: these are reference-driven style transfer tools. Use a reference frame to push a rough lettering animation toward an ink or painted look, while the underlying shapes stay yours.
- Remove Background: isolate lettering from a photographed or textured backdrop when you need a clean cutout.
- 2D-to-3D and Turntable: turn a flat letterform into a dimensional asset and rotate it, which gives you reference or a starting point for a 3D title without building it from scratch.
Treat it as a complement, not a replacement. Procreate is where you draw the letters, After Effects or Nuke is where you finish the shot, and Styleframe is an option when you want controlled, reference-driven motion or style work in the middle.
Common Mistakes to Avoid
- Working at screen size, then scaling up. Draw at or above your final resolution.
- Flattening too early. Keep sketch, ink, color, and effects on separate layers until delivery.
- Over-stabilizing. Too much smoothing makes the brush feel disconnected from your hand.
- Skipping the thumbnail stage. Weak composition cannot be fixed by polished inking.
- Ignoring export needs. Decide on PSD or PNG, alpha, and layer naming before you start inking, not after.
A Simple Workflow to Repeat
- Create a custom RGB canvas sized for your composition.
- Sketch several layouts and pick one.
- Set up Drawing Guides or a text-based trace layer.
- Ink on separate layers with a stabilized brush.
- Add color, shadow, and texture with clipping masks and Alpha Lock.
- Export a layered PSD or transparent PNGs.
- Animate in After Effects, and bring in Styleframe where you want reference-driven motion or restyling.
Procreate's lettering tools are approachable for beginners. What separates usable motion lettering from a nice illustration is the preparation: clean layers, the right resolution, and a layout designed with the animation in mind.