How to Use Procreate as a Lightbox
StyleFrame Team7 min read
To use Procreate as a lightbox, finish your drawing on a canvas with dark lines on a white background, set the iPad to maximum brightness, and turn on Guided Access (Settings > Accessibility > Guided Access) so the screen ignores touch. Lay tracing paper over the display, tape it down, and trace with a light touch. The trick is freezing the screen so your hand doesn't pan, zoom, or draw on the artwork underneath.
For motion designers and animators, this is a quick way to get digital keyframes, character poses, or storyboard panels onto physical paper. You can then scan that work back into your After Effects, Nuke, or Blender pipeline.
Why use an iPad as a lightbox?
A dedicated lightbox is a flat LED panel that shines through paper so you can trace what's underneath. An iPad does the same job, with a few advantages for digital-first artists:
- You refine in layers first. Clean up poses, timing charts, or lettering in Procreate, then do a single physical transfer.
- It's already in your bag. There's no extra gear for a location shoot, a client meeting, or a travel sketch session.
- You control the source image. You can scale, flip, rotate, and adjust contrast before the paper ever touches the glass.
The trade-offs are real. An iPad screen is smaller than most lightboxes, and you have to protect the glass. It also won't shine through thick paper, so you're limited to thin stock.
What you need before you start
Gather these first:
- An iPad running Procreate with a finished, clean drawing
- Tracing paper, thin layout paper, or another translucent stock
- Low-tack tape (painter's tape or washi tape)
- A pencil, fine liner, or brush pen with soft pressure
- A screen protector (a matte, paper-texture film also gives you some grip)
Paper choice matters most. Tracing paper, marker paper, and thin parchment-style sheets generally let enough light through. Heavy bristol or watercolor paper usually blocks too much. If your final surface is thick, trace onto thin paper first, then transfer it with graphite on the back of the sheet.
Step 1: Prepare your artwork in Procreate
The cleaner the image, the easier the trace. Spend a few minutes here.
- Isolate the linework. Hide color, shading, and reference layers. Keep only the lines you want to trace.
- Use a white background. Dark lines on white give you the highest contrast through paper. If your lines are light or colored, switch them to black or a dark gray.
- Thicken thin lines slightly. Hairlines can disappear through paper. A little extra weight makes them easy to follow.
- Reduce clutter. Turn off guides, grids, and any UI overlays you don't need, and make sure only the image is on screen so nothing sits over it.
- Set the final size. Zoom the canvas to the scale you want on paper. If the drawing is bigger than the screen, split it into sections and take screenshots of each, keeping the zoom level identical.
Splitting a large piece is a common workaround. Zoom in until the first section is the size you want, screenshot it, slide to the next area without changing zoom, and screenshot again. Keep a few pixels of overlap so the sections register when you piece them together.
Step 2: Turn on Guided Access
Without this step, your hand will move the image the moment it touches the screen. Guided Access locks the iPad into a single view and disables touch input.
- Open Settings > Accessibility and scroll to Guided Access.
- Switch it on.
- Open Passcode Settings and choose Set Guided Access Passcode. Enter a passcode you'll remember.
- Return to your image and triple-click the top button (or the Home button on older iPads).
- Tap Start. The screen is now frozen.
Set the Guided Access passcode during setup. Some users have reported that skipping it can lead to an enlarged, unusable passcode screen when exiting, which can force a restart. If you get stuck, press volume up, press volume down, then hold the power button until the iPad shuts off.
To exit normally, triple-click the top button again and enter your passcode.
Step 3: Set up brightness and display
Before you place paper, check these settings:
- Raise brightness to maximum.
- Turn off Auto-Brightness so the screen doesn't dim mid-trace.
- Turn off Auto-Lock so the screen doesn't switch off during your session.
- Enable Do Not Disturb so notifications don't flash across your artwork.
- Plug the iPad in if you're tracing for a long session. Maximum brightness drains the battery quickly.
Step 4: Trace safely
With the screen frozen and bright:
- Place the paper on the iPad and tape it down at the corners. Tape to the table or to the iPad's bezel, not the screen.
- Check that the artwork is aligned. Leave a margin around the image.
- Trace with light pressure. A pencil, brush pen, or soft-tipped marker is ideal.
- Avoid hard or pointed nibs. Dip pens, metal-tipped tools, and anything that needs real pressure can scratch or damage the display.
- Work from the center out, or from the top down, so your hand doesn't smudge finished lines.
If you can't see the lines through the paper, dim the room lights. If it's still too faint, thicken the lines in Procreate or switch to thinner paper.
Step 5: Transfer the trace to final paper
Once you have a clean tracing, you have a few options:
- Graphite transfer. Scribble over the back of the tracing with a soft pencil, flip it onto your final paper, and trace the lines again to leave a faint copy.
- Direct inking. If your final paper is thin enough, trace directly on it.
- Use a real lightbox for the second pass. A dedicated panel will handle thicker sheets.
Where this fits in a motion pipeline
Tracing on paper is rarely the end goal for a motion designer. It's usually a step toward something that ends up in a timeline. Here are practical uses:
Hand-drawn texture and line quality
Digital lines can look too perfect. Tracing a clean Procreate drawing in ink or graphite adds the wobble and pressure variation that clients often ask for in "handmade" explainers. Scan the result at high resolution, clean up the levels, and bring it into After Effects as a texture, matte, or animated cel.
Keyframe poses and cleanup
Animators can rough in key poses in Procreate, trace the best ones onto paper for final line work, then scan the sheets in sequence. The scanned frames can be assembled as an image sequence in After Effects, Premiere Pro, or Nuke.
Storyboards and style frames
Trace the strongest compositions onto good paper for rendering in marker, ink, or watercolor. Scan them and use them as boards or style frames in client decks and animatics.
Reference for 3D
Hand-traced turnarounds, silhouettes, or pattern sheets can act as clean reference for modeling or texturing in Cinema 4D or Blender. Scan flat and calibrate to a known scale so proportions hold.
Common problems and fixes
The image moves when I touch the screen. Guided Access isn't active. Triple-click the top button and tap Start.
I can't see the lines through the paper. Raise brightness, thicken the lines, dim the room, or use thinner paper.
I'm stuck in Guided Access. Try your passcode first. If the keypad won't respond, force restart with volume up, volume down, then hold the power button.
The trace looks stiff. Trace with a loose wrist and a different tool than the one you drew with. Brush pens and soft pencils add natural variation.
My drawing is bigger than the iPad. Split it into overlapping screenshots at the same zoom and trace each section, using registration marks to align the sheets.
I'm worried about scratches. Use a screen protector, a soft pencil or brush pen, and light pressure. Never use a pointed metal nib.
Final tips
- Test your paper on a small area before committing to a full piece.
- Save a duplicate of your Procreate file with the trace-ready lines, so you can regenerate the guide at any size.
- Scan or photograph your finished work in even light, then correct levels before bringing it into your compositing app.
- Keep a consistent resolution for your scans so sequences line up without rescaling.
An iPad isn't a replacement for a high-quality lightbox, but for thin paper and small-to-medium pieces it's a capable stand-in. Lock the screen, use the right paper, and trace gently, and you get the polish of digital drawing with the character of physical media, ready to scan back into your timeline.