How to Use Procreate 5 Animation
StyleFrame Team8 min read
Procreate 5 animation runs through Animation Assist, found at Actions > Canvas > Animation Assist. Turning it on adds a timeline along the bottom of the canvas, and every layer or layer group becomes one frame. You draw on each frame, use onion skinning to judge spacing, set frame rate and playback mode, then export from Actions > Share as an animated GIF or MP4. It suits short loops, animatics, and hand-drawn elements, not long-form production.
What Procreate 5 Animation Is Good For (and Where It Stops)
Animation Assist is a frame-by-frame tool, and it is more limited than dedicated animation apps. Each frame is a drawing, and you control timing by holding frames and changing the frame rate.
That makes it useful for:
- Hand-drawn loops, such as a flickering flame, a blinking eye, or drifting clouds
- Rough animatics and pose tests you'll refine elsewhere
- Texture-rich 2D elements to bring into After Effects, Premiere Pro, or Blender
- Quick motion tests for a character or style before committing to a full pipeline
Because frames and layers are the same thing, you can't stack a full layer setup under every frame the way a dedicated 2D animation app allows. Procreate's workaround is layer groups, covered below. Total frame count is also limited by canvas size and device storage.
Step 1: Set Up the Canvas and Check Your Layer Budget
Before drawing, decide your frame count. The number of layers available depends on your canvas dimensions and your device's storage, so a larger canvas means fewer frames.
To check the limit:
- Open Actions > Canvas > Crop & Resize.
- Look at the maximum layer count shown briefly at the top of the screen.
- Tap Done to exit without changing anything.
If you plan to composite in After Effects later, work at the final delivery resolution or a clean multiple of it. Scaling hand-drawn line work up afterward softens it. Scaling down is safer, but it costs you frames on a device with less storage.
Step 2: Turn On Animation Assist
Go to Actions (the wrench icon) > Canvas, then toggle Animation Assist on. The timeline appears at the bottom. Treat it as an animation-friendly version of the Layers panel: tapping a frame makes it the active layer.
A few behaviors to know:
- All layers and groups become frames, and only the selected frame's contents are visible while you work
- If the selected frame is a group and you try to edit it, Procreate prompts you to open Layers and pick a specific layer inside it
- You can scrub the timeline with one finger and use the play and pause button on the left
- A four-finger tap toggles full-screen mode for a cleaner view of the canvas
Step 3: Build Frames with Groups
Most tutorials start by drawing on single layers. For anything beyond a quick test, use one group per frame instead. Each group can hold:
- A rough sketch layer
- Clean line work
- Flat color
- Shading and highlights
- A notes layer for fixes or action reminders
Name the groups with a simple convention (Frame 01, Frame 02) so you can find them later. This also lets you hide the sketch, adjust opacity on a color layer, or copy elements between frames without disturbing everything else.
To add frames, tap Add Frame in the timeline for a blank one, or duplicate an existing layer or group from the Layers panel. Duplicating is usually faster for small movements, because you nudge the existing drawing rather than redraw it.
Step 4: Use Onion Skin to Control Spacing
Onion skinning shows ghosts of neighboring frames so you can judge spacing and arcs. Open the settings in the timeline to find:
- Onion skin frames: how many frames before and after are visible. Three or four is a reasonable starting point.
- Onion skin opacity: keep the ghosts faint enough that they guide you without cluttering the drawing.
- Onion skin colors: by default, frames before are red and frames after are green. If your line art is a similar color, change the two colors so you can tell which line belongs where.
- Blend Primary Frame: renders the selected frame as though it were an onion skin frame, which helps when you want a flattened view of the whole range.
- Colorize toggle: switches the red and green tinting on or off.
For animators who come from After Effects, onion skinning is the closest thing to a motion trail. Use it to check arcs, then step through the frames individually to catch pops.
Step 5: Control Timing with Hold, Duplicate, and Frame Rate
Tap a selected frame in the timeline to get Delete, Duplicate, and Hold options. Hold extends a frame's duration with a slider, so the drawing stays on screen for extra beats without adding layers. That saves your layer budget and is the main way to animate "on twos" or "on threes".
Frame rate is set in the timeline settings, and you can change it during playback, which is useful for finding the right feel. Note that tutorials use very different values. One example dropped to around four frames per second for a gentle cloud bounce, from a starting rate of 15. Pick your rate based on style, then match it to your comp's frame rate if the clip is headed for After Effects.
Playback mode also matters. The options along the bottom of the settings include ping-pong, which plays forward then reverses. Ping-pong is a quick way to turn a half-cycle into a seamless loop, but check it before export, because duplicated end frames can create a visible stall.
Step 6: Set Background and Foreground Frames
Static elements shouldn't consume a frame for every beat. Procreate lets you mark the first frame as the animation background and the last frame as the foreground. Their contents render persistently across the whole animation.
A typical setup:
- Merge everything that won't move into one layer.
- Place it as the first frame and toggle it on as the background.
- Put overlay elements, such as a vignette or grain, on the last frame and toggle it on as the foreground.
- Animate only the moving pieces in the frames between them.
If you're working from existing artwork, duplicate the file in your gallery first so the original stays intact.
Step 7: Speed Up Drawing with Warp and Liquify
Two tools help when redrawing every frame isn't practical:
- Warp (Transform): draw a clean head or hand once, copy it into later keyframes, then warp it into the new pose. This keeps proportions consistent and gives you a base to refine.
- Liquify (Adjustments): small Push movements on duplicated groups work well for organic motion like wind in leaves or hair. Keep the movements small. Large pushes between frames produce jittery results.
Both are shortcuts, not substitutes for drawing. Use them for in-betweens and secondary motion, and redraw where the silhouette needs to change.
Step 8: Export
Open Actions > Share and choose an animated format. Animated GIF is fine for previews and loops, and Animated MP4 is the better choice for sharing to social platforms such as YouTube and Instagram.
Production notes:
- GIF has a limited color palette, so gradients and textured brushes can band. Don't treat it as a deliverable for broadcast or client work.
- MP4 is fine for review, but it's compressed. If you need a clean source for compositing, export at the highest quality available and keep the .procreate file as your master.
- Always test the export. Timing, loop mode, and background and foreground frames should all be verified in the exported file, not just in the app.
Taking Procreate Animation into a Professional Pipeline
Procreate is strongest at the drawing stage, so the useful question is what happens after. A few practical patterns:
- Composite in After Effects: import the exported clip, then add camera moves, color work, and sound. Hand-drawn texture on top of a controlled comp is a common look.
- Use it for animatics and style tests: block out timing in Procreate, then rebuild in your main tool once the client approves.
- Hand off drawings, not just clips: the keyframes you draw are often the most valuable asset, so keep them organized as separate groups for reuse.
Common Mistakes to Avoid
- Drawing before checking layer limits: you can run out of frames halfway through a scene.
- Forgetting onion skin colors: matching line and ghost colors make spacing errors hard to catch.
- Overusing Liquify: large pushes look wobbly. Small, repeated movements read better.
- Skipping the background frame: duplicating static art across every frame wastes layers.
- Exporting only as GIF: you'll lose color fidelity and have nothing clean to composite.
Quick Reference
- Duplicate your artwork and check the layer limit in Crop & Resize.
- Enable Animation Assist from Actions > Canvas.
- Build each frame as a named group (sketch, line, color, notes).
- Configure onion skin frames, opacity, and colors.
- Use Hold and frame rate to set timing.
- Mark static art as background or foreground.
- Use Warp and small Liquify moves for in-betweens.
- Export as animated MP4 for review, and keep the project file as your master.
Procreate 5's animation tools are simple by design. Learn the timeline, onion skin, and Hold, keep your frames organized, and you can get reliable short animations out of it, then pass them to your compositing tools for the rest of the pipeline.