How to Use Pathfinder in Procreate
StyleFrame Team9 min read
Procreate has no Pathfinder panel. Pathfinder is a vector feature from Illustrator, and Procreate is a raster app. You can still get the same results (union, subtract, intersect, exclude, divide) by combining the Selection tool, layer merging, Cut and Paste, Alpha Lock, clipping masks, and Layer Masks. The output is pixels rather than editable paths, so the shapes can't be re-edited as vectors later.
Why Procreate Has No Pathfinder
Pathfinder runs boolean operations on paths. Each shape is defined by anchor points and curves, so combining two shapes produces a new, still-editable path. Procreate stores everything as pixels on layers. When you combine shapes, you are editing pixels, and the result is fixed at your canvas resolution.
For motion designers this affects how you plan the work. If a shape needs to stay editable, animatable, or resolution-independent, build it as a vector in Illustrator or as a shape layer in After Effects. Use Procreate when you want hand-drawn texture and quick visual exploration, and treat the Pathfinder-style operations as a way to clean up shapes quickly.
Pathfinder Operations and Their Procreate Equivalents
The recipes below all rely on the same Procreate behavior. Tap a layer to open its menu and choose Select, and Procreate turns that layer's non-transparent pixels into a selection. This is what makes the layer-to-layer boolean workflow possible.
Before You Start: Set Up for Boolean-Style Work
A few habits make these workflows safer.
- Put each shape on its own layer. Boolean operations in Procreate are destructive, and separate layers keep your options open.
- Duplicate before you cut. Swipe left on a layer and tap Duplicate, then hide the original as a backup.
- Use flat, solid fills. Soft brushes and textured edges make selections ragged.
- Work at the resolution you'll deliver. There is no vector fallback, so a canvas that's too small will show up later in your composite.
How to Build Shapes with QuickShape
Start with clean geometry. Draw a circle, rectangle, triangle, or polyline and hold your Apple Pencil at the end of the stroke. QuickShape snaps the stroke into a perfect form. While still holding, place a second finger on the canvas to constrain it, so a rectangle becomes a square or an oval becomes a circle. Dragging while holding scales and rotates the shape, and a second finger while dragging rotates in 15-degree increments.
When you release, an Edit Shape button appears at the top of the canvas. Tap it to get transform nodes you can drag for finer adjustments. Tap the canvas to commit the shape. Once committed, it's pixels, so finish the geometry before you start combining shapes.
Fill each shape by dragging the color disc from the top right into it (ColorDrop). Keep each shape on its own layer.
Union: Combine Shapes into One
Method 1: Merge layers.
- Put the two shapes on separate layers, one above the other.
- Tap the top layer and choose Merge Down, or pinch the two layers together.
- You now have one layer containing both shapes.
If both shapes share the same fill color, the overlap disappears and they read as a single form. If the colors differ, the top shape covers the lower one where they overlap, which matches Pathfinder's behavior when stacking order matters.
Method 2: Selection Add. Open the Selection tool, choose a mode such as Ellipse or Rectangle, and draw the first shape. Tap Add and draw the second. Then use ColorDrop to fill the combined selection on a new layer.
Subtract: Cut One Shape Out of Another
Method 1: Select and Cut.
- Put the shape to keep on Layer A and the cutter shape on Layer B.
- Tap Layer B and choose Select. The cutter's outline becomes a selection.
- Switch to Layer A.
- Swipe down with three fingers to open the Copy & Paste menu, then tap Cut.
- Hide or delete Layer B.
Layer A now has a hole where the cutter was, the same as Minus Front.
Method 2: Layer Mask (non-destructive).
- Tap Layer A and choose Mask.
- Select the mask and paint in black over the area to hide. Painting in white brings it back.
- Because masks work in grayscale, you can use gray values for partial transparency, which has no direct Pathfinder equivalent.
If you may revise the cut later, use the mask. If you want a final flattened shape, use Cut.
Intersect: Keep Only the Overlap
- Put one shape on Layer A and the other on Layer B.
- Tap Layer A and choose Select.
- Use the Selection tool's Invert button, so everything except Layer A's shape is selected.
- Switch to Layer B and Cut.
What remains on Layer B is only the area where the two shapes overlapped. Hide Layer A, or keep it if you need it elsewhere.
Clipping masks give you a quick preview of the same idea. Tap the upper layer and choose Clipping Mask, and it only shows where it overlaps the layer below. This is useful for checking the result, but the hidden pixels still exist on the layer. If you need the overlap as real pixels, use the Select, Invert, and Cut method.
Exclude Overlap: Remove the Shared Area from Both
There is no single command for this, but the steps are simple:
- Duplicate both shape layers, so you have A, B, A copy, and B copy.
- Use the Intersect recipe on the copies to create a layer containing only the overlap. Call it Layer I.
- Tap Layer I and choose Select.
- Switch to Layer A and Cut. Do the same on Layer B.
- Delete Layer I.
Both shapes now have the shared region removed, leaving the two non-overlapping parts.
Divide: Split a Shape Along Another
- Put the shape you want to split on Layer A, and the dividing shape on Layer B.
- Tap Layer B and choose Select.
- Switch to Layer A, then swipe down with three fingers and tap Cut & Paste.
Procreate moves the pixels inside the selection to a new layer and leaves the rest on Layer A. You now have two separate pieces you can recolor, move, or animate independently, which is the main reason to use Divide in a motion workflow.
Using Alpha Lock for Recoloring and Clean Fills
Alpha Lock isn't a Pathfinder operation, but it's helpful after combining shapes. Turn it on for a layer (a two-finger swipe to the right on the layer does this), and you can only paint on pixels that already exist. After a union, subtract, or divide, this lets you add shading, gradients, or texture without spilling outside the shape's silhouette. Turn Alpha Lock off if you need to extend the edge, then switch it back on.
Limits to Plan Around
- No live editing. Once you cut or merge, you can't adjust the original paths. Keep duplicates of the source layers.
- Edge quality depends on resolution. Zoom in and check edges after selections and cuts. Fix stray pixels before exporting.
- Anti-aliasing and halos. Cutting along a selection can leave faint fringing when the shape is composited on another background. Check against your actual backdrop.
- No path export. Procreate doesn't give you vector paths to bring into After Effects, so for logos and icons that need to scale, rebuild or trace them in a vector tool.
If your project depends on repeatable boolean operations, do the geometry in Illustrator, or build it with Merge Paths in After Effects shape layers (modes include Add, Subtract, Intersect, and Exclude Intersections). These stay editable and animatable. Use Procreate for the hand-drawn look.
Moving Procreate Shapes into a Motion Pipeline
Once your shapes are separated into clean layers, you can export them for compositing. Procreate can export layered files such as PSD, as well as PNG, so each piece lands in After Effects as its own element. Naming layers in Procreate before export saves time. Keep split pieces from Divide on separate, clearly named layers so they can be animated individually.
Where Styleframe Fits
Procreate artwork can also work as input for AI-assisted motion, if you want control over the result. is an AI video and motion tool built around artistic control rather than one-click generation.
For example, you can use your cleaned-up Procreate frames and illustrations as references for AI-assisted motion, so the result stays close to what you drew.
The boolean-style shape work you did in Procreate stays yours, and Styleframe handles the motion and stylization stage.
Quick Reference
- Procreate has no Pathfinder; it's a raster app, so you recreate the results with selections and layers.
- Tap a layer and choose Select to turn its contents into a selection.
- Cut (three-finger swipe down) removes selected pixels from the active layer.
- Invert in the Selection tool flips the selection, which is the key to Intersect.
- Cut & Paste gives you Divide.
- Layer Masks give you non-destructive subtraction.
- For editable, scalable shapes, use Illustrator or After Effects Merge Paths instead.
FAQ
Is there a Pathfinder plugin or hidden tool in Procreate? No. Procreate has no boolean path operations. The workflows above are the standard workaround.
Can I export Procreate shapes as SVG paths? Not natively. Procreate works in pixels, so use a vector app if you need paths.
What's the fastest way to cut one shape from another? Tap the cutter layer, choose Select, switch to the target layer, and use Cut from the three-finger swipe menu.
Should I use Cut or a Layer Mask? Use a Layer Mask while you're still experimenting, because it's reversible. Use Cut once you're ready to commit and flatten.