How to Use Lasso Tool in Procreate to Move Objects
StyleFrame Team8 min read
To move an object with the lasso in Procreate, select the layer it's on, tap the Selection tool (the S-shaped icon), choose Freehand, and draw a loop around the object. Then tap the Transform tool (the arrow icon) and drag the selection to its new position. Procreate calls its lasso "Freehand," and it only moves pixels on the active layer, so check which layer is selected before you start.
This guide covers the full workflow, the selection modes that matter, how to avoid common mistakes, and how to get moved elements into a motion pipeline.
The Quick Workflow
- Open the Layers panel and tap the layer containing the object. It highlights when active.
- Tap the Selection tool (S-shaped icon) in the top toolbar.
- Choose Freehand at the bottom of the screen. This is the lasso.
- Draw around the object and close the loop back at the starting point.
- Tap the Transform tool (arrow icon).
- Drag anywhere on the canvas to move the selection. Lift your finger or Apple Pencil to place it.
- Tap the Transform tool again or tap Selection to commit.
Everything outside the loop stays untouched. Procreate shades the unselected area with a diagonal hatch pattern, which makes it easy to confirm what you've captured.
Understanding the Selection Modes
The lasso is one of several selection modes at the bottom of the screen. Choosing the right one saves a lot of cleanup.
Freehand (the lasso)
Freehand lets you draw an arbitrary outline, which suits organic shapes like characters, props, or hand-drawn elements. Draw slowly around tight edges and use your pencil rather than your finger for precision. If you need to correct the outline, don't redraw. Use the Add and Remove options instead.
Automatic
Automatic is the closest thing Procreate has to a magic wand. Tap an area on the canvas and drag left or right to set the selection threshold. It works well for flat color shapes and cel-style artwork, where regions are cleanly separated by color.
Rectangle and Ellipse
These select geometric regions. They are useful for moving panels, UI elements, or tiles from a layout, and for quickly grabbing a section of a texture.
Add, Remove, and Invert
- Add extends the current selection with another loop. Use it to capture pieces of an object that sit apart from the main shape.
- Remove subtracts from the selection, which is the fastest way to trim stray pixels you caught by accident.
- Invert flips the selection so you can move everything except the object.
Feather
Feather softens the edge of the selection. If you move a feathered selection, the edge blends gradually instead of cutting sharply. That's useful for atmospheric elements like smoke or glow, but it will leave a soft halo around hard-edged objects, so leave it at zero for crisp art.
Color Fill and Masking
Color Fill, when active, fills each loop you draw with your current color. Many users trigger it by accident and end up painting a blob instead of selecting. If your lasso is filling shapes, tap the Color Fill button to turn it off. The same goes for the Mask option, which hides the selection tint and changes how the region behaves.
Moving the Selection With Transform
Once your selection is active, tapping the arrow icon opens the Transform tool. How you move depends on the mode at the bottom of the screen.
Uniform
Uniform is the default and the safest. Dragging anywhere on the canvas, inside or outside the bounding box, moves the content. Pinching inside the box scales it from the center, and dragging a corner node scales from the opposite corner while preserving proportions. A rotation handle at the top of the box turns the content.
Freeform
Freeform scales without preserving proportions, which stretches or squashes the object. Use it when you want deliberate distortion, but avoid it for simple moves.
Distort and Warp
Distort moves each corner independently, which is useful for faking perspective on a sign, screen, or card. Warp applies a mesh you can push and pull, which suits bending fabric, cloth, or curved surfaces.
Snapping and Magnetics
Turn on Snapping in the Transform toolbar to get blue guides that align to other layers and yellow guides that align to the canvas center and quadrants. Magnetics lets you define an axis to align against. If you're laying out a styleframe or a storyboard panel, snapping gives you cleaner placements than eyeballing.
Interpolation
When you scale or rotate a selection, Procreate resamples the pixels. The Interpolation setting in the Transform toolbar controls how. Bicubic is generally the smoothest for painted work, Bilinear is a middle ground, and Nearest Neighbor preserves hard pixel edges, which matters for pixel art. Repeated transforms degrade quality, so do the move in one gesture where possible.
Moving Without Leaving a Hole
By default, moving a selection lifts the pixels off the layer and leaves transparency behind. That's often what you want, but sometimes you want a copy, or you want the object on its own layer so you can keep adjusting it.
Cut and Paste to a new layer
With a selection active, swipe down with three fingers to open the Copy & Paste menu. Choose Cut & Paste to move the object onto its own new layer, or Copy & Paste to duplicate it. This is the best habit for any asset you'll move more than once, because you can then reposition it using layer transforms without redrawing the lasso each time.
Moving an entire layer
If the object already lives on its own layer, you don't need a lasso. Select the layer, tap the Transform tool with no selection active, and the whole layer moves. To move several layers together, swipe right on the extra layers to select them, or group them first.
Repairing the gap
If you moved pixels on a flattened layer, the area they left behind is empty. Fill it by painting, or by copying nearby texture and pasting it over the hole. For painted backgrounds, it's far easier to keep foreground elements on separate layers from the start.
Troubleshooting Common Problems
- The lasso fills with color: Turn off Color Fill in the Selection toolbar.
- Nothing moves, or the wrong thing moves: Check the active layer. Procreate only transforms the layer you've selected.
- Edges look jagged after moving: Check the interpolation setting and avoid repeated scaling.
- The selection includes extra pixels: Use Remove with a tighter loop, or switch to Automatic for flat-color areas.
- The object clips at the canvas edge: Content moved beyond the canvas boundary is cropped when you commit. Move a duplicate if you're unsure.
- You lose the selection: Use the Save & Load option in the Selection toolbar to store complex selections you'll need again.
Why This Matters for Motion and VFX Work
Procreate isn't a compositing tool, but many motion designers and animators use it for styleframes, concept art, texture painting, and hand-drawn elements. The lasso and Transform combination is how you rearrange those pieces before they go into a pipeline.
A few habits make the handoff cleaner:
- Separate elements onto their own layers using Cut & Paste. Each becomes a discrete asset you can animate independently.
- Keep the canvas large. Work at a resolution that holds up to scaling in your compositing app. Moving and scaling inside Procreate resamples pixels, so start bigger than your delivery size.
- Export layered files. A layered PSD preserves your separation so you can rebuild the scene in After Effects, where layers become parallax planes, puppet targets, or camera-mapped cards. Export PNGs with transparency for individual elements.
- Hide the background before exporting an isolated element so you get clean alpha.
Using Procreate Frames in an AI-Assisted Pipeline
Once your composition is arranged, the still frame can serve as source material for motion. Styleframe is an AI video and motion tool built for artistic control rather than one-click output. Its generations are driven by your reference images, video clips, and keyframes, so a Procreate layout you've carefully composed can anchor the result.
In practice, that might look like this:
- Frames-to-Video: Use two or more of your Procreate frames as keyframes, such as an object in its starting and ending positions, and generate the motion between them.
- Restyle and Ink-and-Paint: Use your painted frame as a style reference so footage or other frames pick up your look through reference-driven style transfer.
- Remove Background: Isolate an element from a frame when you need it separate from its backdrop.
- 2D-to-3D and Turntable: Turn a flat character or prop into a 3D asset and generate a rotating view to check it from other angles.
- 4K Upscale: Bring finished output up to production-ready 4K.
Iteration is non-destructive, so you can try variations without losing earlier versions. Styleframe exports image sequences, which drop straight into After Effects or Nuke. An After Effects plugin is on the way. Your compositing stays where it is, and Styleframe becomes one stage in it rather than a replacement for your tools.
Practical Tips for Faster Selections
- Zoom in before drawing a lasso around detailed edges. Precision improves dramatically.
- Use Add and Remove instead of starting over. Small corrections are faster than a new loop.
- Save frequently used selections with Save & Load.
- Name your layers after you cut objects onto them. Layered exports are much easier to rebuild in After Effects when layers are labeled.
- Duplicate before you experiment. Duplicate the layer, then lasso and move on the copy so the original stays intact.
- Lock transparency (Alpha Lock) on layers where you want to recolor an object without affecting its shape.
Summary
Selecting with Freehand and moving with Transform covers most Procreate repositioning tasks. Draw your loop on the correct layer, refine it with Add, Remove, or Feather, then drag to move. For repeated edits, Cut & Paste the object to its own layer. Keep elements separated, work at generous resolution, and export layered files or transparent PNGs so your artwork carries cleanly into After Effects, Nuke, or an AI-assisted motion step.