How to Use Halftone Brushes Procreate
StyleFrame Team9 min read
Halftone brushes in Procreate use a dot or line pattern as the brush's grain, so every stroke lays down a halftone texture instead of flat color. Import the brush set, set the grain size to the same percentage on every brush you use, and paint each ink color or tonal value on its own layer. If you want a halftone applied to finished artwork instead, use Adjustments → Halftone and choose Full Color, Screen Print, or Newspaper.
Halftone brushes vs. Procreate's Halftone adjustment
Procreate gives you two routes to a halftone look, and they suit different jobs.
Halftone brushes are painted in. The dot pattern lives in the brush's grain, so you decide stroke by stroke where the texture goes, how dense it is, and which color it uses. This is the better route for comic-style shading, risograph-like color separations, and illustrations where only certain areas should carry dots.
The Halftone adjustment is a filter. Go to Adjustments → Halftone, then drag your finger right to enlarge the dot screen. At 0% nothing is applied. It has three modes:
- Full Color keeps the original artwork's color behind the dots, like magazine printing.
- Screen Print shows white through the dots' background, like screen printing.
- Newspaper converts the effect to greyscale.
Tap the canvas and choose Apply to commit while staying in the tool, or tap the Adjustments icon again to commit and leave.
Procreate's own documentation points out that this is a digital effect. If the artwork is headed for physical screen printing, let the printer generate the halftone from your continuous-tone art.
You can also combine the two. Paint with brushes where you want control, then apply the adjustment to a single layer instead of the whole canvas. That gives you isolated halftone areas without buying a brush pack.
Set up the canvas before you paint
Halftone patterns are sensitive to resolution. A few decisions up front save trouble later, especially if the art will end up in a video timeline.
- Work large. Dot patterns that look crisp on a small canvas can soften or alias when scaled up in a 4K comp. Build the canvas at or above your delivery resolution, and use 300 DPI if the piece may also go to print.
- Pick a dot size and stick with it. Grain scale is the main control for dot size. Changing it midway produces inconsistent texture that reads as a mistake rather than a style.
- Plan your layer structure. Decide whether you're working in separated ink colors, tonal levels, or flat color plus a shading layer. Putting halftone on its own layers keeps everything editable and gives you clean elements to animate later.
Install and organize your halftone brushes
Third-party packs usually arrive as a brush set file. Open it on your iPad and Procreate imports it into the Brush Library as a new set. Many packs also include a matching swatch palette, which you import the same way.
Before you start painting:
- Open the brush set and test a few strokes on a scratch layer.
- Check what each brush does. Some are plain dot or line textures. Others, such as pressure-sensitive shader brushes, are built for gradients.
- Read the license. Some packs set limits on commercial, broadcast, or film use, such as view caps for video advertising or a revenue threshold for larger organizations. If your work is going to client video, confirm the terms cover it.
Paint with halftone brushes, step by step
The workflow below follows the approach used by color-separation brush kits, which build color from layered halftone inks. It also works with any single-color pack.
1. Create one layer per ink color
For a kit with yellow, red, and blue brushes, make a layer for each. Select the yellow layer, pick the yellow swatch, pick a yellow brush, and fill your yellow areas. Repeat for the other colors. Don't worry about staying inside the lines, because loose coverage is part of the printed look and overlap is how the colors mix.
2. Match the grain size across brushes
Tap the brush to open its settings, go to the Grain section, and type in a size percentage. Then give every other brush you plan to use the same percentage. Mismatched dot sizes break the illusion of a single printing screen.
3. Keep brushes and swatches paired
Color-separation kits are designed so each brush works with its own swatch. Mixing a red brush with a blue swatch gives you colors the kit wasn't built to produce. If you're unsure which combination makes a color, check the pack's color chart.
4. Build up shading in passes
Lay in the lightest tonal area first, then add darker passes with the same or a denser brush. Overlapping halftones creates new tones, much like layered ink on paper.
Pressure-sensitive halftone shading
A static dot pattern is useful, but halftone gradients are where brushes earn their keep. A known technique uses a grain with tonally graduated dots. Rather than making the dots physically larger as you press harder, you set the brush to build opacity with pressure. The darker tones inside the grain start to register, so the dots appear to grow.
Other community brushes take different approaches. One line-based shader maps pressure to line density and opacity, tilt to brush size, and grain rotation to switching between horizontal and vertical lines. Changing the grain size adjusts line frequency and thickness. If you want to build your own, grain scale, rotation, and Apple Pencil dynamics in Brush Studio are the settings to experiment with.
Keep in mind that some older community brushes don't work in every Procreate version. Test before relying on one for a deadline.
Control where the halftone lands
You don't need a brush pack to isolate halftone to certain areas. Layer tools give you the same control:
- Alpha Lock restricts painting to existing pixels on a layer, so you can shade a shape without spilling over.
- Clipping masks confine a halftone layer to the shape beneath it.
- Gaussian Blur on a color layer, followed by the Halftone adjustment, converts a smooth gradient into dots. This is a good way to get halftone shading in one object while leaving the rest flat.
A reasonable pattern is to paint flat color first, add a gradient or shading layer above it, clip it, then apply Halftone to only that layer. The linework stays clean and the dots appear only where you want them.
Export for After Effects and other compositing tools
If the halftone art is going into motion work, treat the Procreate file as a source asset, not a final image.
- Export layered files. A layered PSD lets you bring each ink layer or shading pass into After Effects separately. You can then animate, offset, or toggle layers independently.
- Use transparent PNGs for single elements. Hide the background and export individual layers if you need isolated pieces for Premiere Pro, Cinema 4D textures, or Blender materials.
- Watch for moiré and shimmer. Fine dot patterns can alias when scaled, rotated, or moved in a comp. Keep dots large enough to survive your delivery resolution, avoid non-integer scaling where you can, and preview at 100% in the final output size.
- Decide how the dots should behave in motion. If a halftone texture is baked into a character and the character moves, the dots travel with it. If it's meant to feel like a print screen over the whole frame, the pattern should stay locked to the camera. Each choice reads differently, so decide before you draw.
For frame-by-frame work, consistency matters more than perfection. A pattern that boils slightly from frame to frame can read as intentional if the dot size and angle stay consistent, but a pattern that changes scale from drawing to drawing looks like an error.
Extending a halftone look into motion with Styleframe
Procreate is good for authoring a halftone look, but drawing every frame by hand is slow. This is where can sit beside your existing tools. It's an AI video and motion tool.
A practical way to use an AI motion tool with halftone art:
- Use your Procreate frame as the reference. If the tool supports reference-based styling, you can feed in a halftone illustration as the style target and apply it to footage or a render, such as a Cinema 4D or Blender pass, so the look carries over without redrawing it.
- Keyframe the motion. If the tool supports keyframes, set start and end frames, such as two halftone poses from Procreate, and generate the movement between them.
- Iterate without losing earlier versions. Keep your earlier outputs so you can try different references or keyframes and compare, rather than committing to the first result.
- Finish at delivery quality. Check the output resolution against your delivery requirements before handoff.
Bring the results into After Effects or Nuke like any other plate, so you keep your compositing, color, and finishing workflow. As with any generative tool, check how well fine dot patterns hold up on your specific material, and fix problem areas in comp as you would with any other element.
Common mistakes to avoid
- Inconsistent grain sizes. Set one dot size and apply it to every brush.
- Applying the Halftone adjustment to the whole canvas by accident. Select the right layer first.
- Using the filter when you need print output. For physical screen printing, have the printer produce the halftone.
- Working too small. Low-resolution canvases produce soft dots that fall apart in a 4K timeline.
- Ignoring the license. Check whether a brush pack's terms cover broadcast, film, or large-scale advertising before it goes into client work.
Quick reference
- Import the brush set and swatches.
- Create a canvas sized for your final output.
- Make one layer per ink color or tone.
- Set the same grain size percentage on all brushes.
- Paint lightest to darkest, using pressure-sensitive brushes for gradients.
- Use Alpha Lock, clipping masks, or per-layer Halftone adjustments to isolate effects.
- Export layered files or transparent PNGs for your compositing tool.
- If you want to carry the look into moving footage, use the artwork as a reference in a tool like Styleframe and finish the result in After Effects or Nuke.
Once the dot size, layer structure, and export workflow are settled, halftone becomes a repeatable part of your toolkit instead of a one-off texture.