How to Use Gradient Tool in Procreate
StyleFrame Team8 min read
Procreate has historically had no Photoshop-style gradient tool where you drag a line across the canvas to set a start point, end point, and angle. Check your current version's release notes in case that has changed. Instead, you build gradients with Gaussian Blur on color bands, a soft airbrush, a feathered selection fill, or a Gradient Map adjustment. For most work, the fastest method is to block in two or three color bands on one layer, then use Adjustments > Gaussian Blur > Layer and drag your pencil until the transition is as smooth as you need.
What "Gradient Tool" Means in Procreate
If you come from After Effects, Photoshop, or Nuke, you expect a ramp with draggable endpoints, linear and radial modes, and live editing. Procreate's gradient workflows are more painterly. You make a gradient by transforming pixels rather than defining a mathematical ramp, so most of the control comes from layers, blur amount, and masks.
That has consequences for pro work:
- Gradients are raster pixels at your canvas resolution, not live parameters.
- You adjust a transition by blurring, transforming, or changing opacity, not by dragging handles.
- Banding is a real risk in large, subtle gradients like skies.
Knowing this up front helps you pick the right method and decide what to rebuild elsewhere later.
Method 1: Gaussian Blur (Linear and Radial Gradients)
Blurring hard color shapes is the most reliable way to get a clean gradient. It handles both linear and radial transitions.
Linear gradient
- Create a new layer and fill it with your first color.
- Add bands of other colors across the canvas. Precision doesn't matter, because the blur will soften the edges. For a sunset, three bands work well. Wavy bands give a more organic result.
- Tap Adjustments > Gaussian Blur and choose Layer.
- Slide your finger or pencil left and right to set the blur amount.
Make sure all your colors are on a single layer before you blur. If they sit on separate layers, the blur won't blend them together. Merge by pinching the layers together.
Radial gradient
- Fill a layer with your outer color.
- On the same layer, draw a smaller circle in a second color, then a smaller one inside it in a third.
- Apply Gaussian Blur at the layer level and drag until the rings dissolve into each other.
A larger blur gives a gentler falloff. A smaller blur leaves visible rings, which can be useful for stylized glows. Because the circles are just shapes, you can use ovals or irregular blobs for lighting that follows a character.
Method 2: Soft Brush Gradients
Use a large Soft Brush from the Airbrushing category when you need a gradient that follows a curve instead of running straight. Fill the layer with a base color, pick a second color, and zoom out so the whole canvas is easy to work across. Start with your pen off the canvas and drag slowly across to build the transition. Add more colors the same way.
This method is less precise for straight ramps, but it's good for atmospheric falloff, rim light, and shading on organic forms. If the blending looks patchy, apply a small amount of Gaussian Blur or use the Smudge tool, then merge the layers.
Method 3: Selection Tool with Feather
The Selection tool can produce a gradient edge when you feather it:
- Fill a layer with your base color and pick a second color.
- Tap the Selection tool and draw the area where the second color should appear.
- Turn on Color Fill so the selection fills with your active color.
- Use the Feather control to soften the selection's edge. The more you feather, the longer the transition.
This works well when the shape of the gradient matters, such as a glow inside a specific silhouette.
Method 4: Gradient Map for Tonal Recoloring
Gradient Map works differently from the other methods. It doesn't create a gradient from scratch. It reads the tonal values of your artwork, ignores hue, and replaces each tone with a color from a gradient you define. Dark tones map to the left end of the gradient and light tones to the right.
To use it:
- Go to Adjustments > Gradient Map.
- Pick a gradient from the library at the bottom, or tap the plus button to create a new one. The default is black to white.
- Tap a color point to change its color.
- Tap anywhere on the gradient bar to add more color points, and drag them to move where each color sits in the tonal range.
- Hold a point briefly, then choose delete to remove it.
- Slide a finger left or right on the canvas to change the filter amount.
- Tap another tool in the top bar to apply it and exit.
Three behaviors are worth knowing. The distance between two color points sets both how much of the tonal range they affect and how sharp the blend is. Dragging two points together gives a hard shift. If you pull points in from the ends of the bar, the tones beyond them clip, because no color represents them. And you can map dark colors onto light tones, or give several points the same color, to wash out parts of the range.
If you grade in After Effects, think of this as a Gradient Map or Tritone-style effect. It's excellent for fast color exploration on grayscale value paintings.
Method 5: Imported Gradient Layers with Alpha Lock
An older but still useful workaround is to prepare gradient PNGs in another app, such as black-to-transparent ramps at your canvas dimensions, and import them into Procreate. Save them as PNGs so the alpha channel is preserved.
Once imported:
- Use Transform to scale, rotate, or distort the ramp so it covers only the area you want.
- Erase parts you don't need.
- Turn on Alpha Lock for the layer, pick a color, and run a Fill so the black ramp becomes your chosen color fading to transparent.
- Set an unfilled black gradient layer to Multiply for gradient shading over everything beneath it, and tune it with the opacity slider.
Two useful tricks come from this method. Duplicating a black-to-transparent layer tightens the transition, so two layers roughly halve its width and three cut it to about a quarter. Opacity on the extra layers gives you widths in between. And with Alpha Lock on, painting on a gradient layer with any brush gives you an opacity-gradient effect in a single stroke. Be aware that stacking other blend modes can introduce banding.
Applying Gradients to Shapes and Artwork
Once you have a gradient layer, you usually want it inside something specific:
- Clipping Mask: Draw your shape on a layer, place the gradient layer directly above it, tap the gradient layer, and choose Clipping Mask. The gradient now shows only where the shape has pixels. Move or transform the gradient layer to change which part of the ramp appears.
- Alpha Lock: Lock a shape layer's transparency and paint or fill a gradient directly onto it.
- Multiply or Overlay layers: Place a gradient layer above flat artwork and set a blend mode for shading or color shifts. Check the result for banding at 100% zoom.
Avoiding Banding and Muddy Transitions
Smooth gradients can still show steps, especially on dark or low-contrast ramps. A few habits help:
- Work at the largest canvas size your device handles comfortably.
- Avoid stacking many blend-mode layers over a subtle gradient, since each can compound rounding artifacts.
- Add a small amount of noise or grain over the final gradient. This breaks up visible steps and often looks better than a perfectly clean ramp.
- Pick endpoints with enough difference in value. Two colors of very similar brightness will band more visibly.
- Use Procreate's two-finger tap to undo quickly when you overshoot the blur.
Moving Procreate Gradients into a Motion Pipeline
Gradients you paint in Procreate are most useful as backgrounds, texture plates, lighting passes, or style references. Export your canvas in a format your compositor accepts, then bring it into After Effects, Nuke, Premiere Pro, or Blender as a still. Keep the gradient on its own layer so you can transform, track, or animate it independently.
If you need precise, resolution-independent ramps that animate, rebuild them in your compositor with native gradient or ramp effects, and use the Procreate version as visual reference. Painted gradients carry irregular, hand-made character that procedural ramps lack, so many artists keep both: the procedural one for control and the painted one for texture.
Choosing the Right Method
- Need a quick smooth ramp: Gaussian Blur on color bands.
- Need soft, curved falloff: Soft Brush plus light blur.
- Need a shaped glow or edge: Selection with Feather.
- Need to recolor an existing value painting: Gradient Map.
- Need repeatable, controlled ramps: Imported PNG gradients with Alpha Lock and Transform.
Procreate rewards experimentation over precision here. Start with Gaussian Blur because it's the simplest, then add Gradient Map or imported ramps as your projects demand more control. When a gradient needs exact, animatable parameters, finish it in your compositor.