How to Use Color Picker in Procreate
StyleFrame Team8 min read
In Procreate, the color picker is the Eyedropper: touch and hold a spot on the canvas, and a ring appears showing the color under your finger. Drag to preview other shades, then lift to set that color as your active color. You can change how the Eyedropper is triggered under Actions (wrench) > Prefs > Gesture controls > Eyedropper. For precise values, open the Color panel and use the Value tab, which shows numerical and hexadecimal readouts.
This guide covers the Eyedropper, the Color panel's modes, and the shortcuts that speed up palette work. It also covers how to carry your colors into a motion pipeline, where small color shifts between apps cause real problems.
What "color picker" means in Procreate
Procreate has two color-selection tools that people often lump together:
- The Eyedropper samples a color from your artwork or an imported reference image.
- The Color panel is where you choose, adjust, and save colors by hand.
Many people who search for "color picker" mean the Eyedropper, but the Color panel is where you confirm and fine-tune what you sampled. A good workflow uses both.
How to use the Eyedropper
Step 1: Get a reference onto the canvas
The Eyedropper samples what's visible in your document, so a reference photo, a still from a client deck, or a frame grab needs to be on the canvas first. Tap the wrench icon, open Actions, and choose Insert a photo. Place the image on its own layer. You can hide or delete it later without affecting your painted layers.
Step 2: Invoke the Eyedropper
By default, touch and hold on the canvas. A ring appears around your finger. The top half shows the color you're hovering over, and the bottom half shows your previous color. That split is useful for judging whether a new color sits comfortably next to the last one, such as when you're picking a shadow tone to go with a midtone.
Step 3: Drag, then release
While your finger is still down, drag across the image to preview colors live. Lifting your finger commits the color. It becomes your active color and goes into the Color panel's History.
Step 4: Paint or fill with it
Your brush now uses the sampled color. If you want to flood-fill an area, drag the Active Color swatch from the top right of the interface onto a closed shape. This is ColorDrop. The fill spreads until it hits a boundary such as a line or an area of a different color.
Customize the Eyedropper trigger
The default touch-and-hold is fine for finger painting, but it can get in the way if you work mostly with Apple Pencil. To change it:
- Tap the wrench icon.
- Go to Prefs.
- Open Gesture controls.
- Select the Eyedropper tab.
- Choose the activation method that suits you.
Options include touch and hold, and Apple Pencil double-tap if you have a second-generation Pencil. You can also trigger the Eyedropper with the Pencil while a finger rests on the square Modify button between the two sliders on the sidebar. With Modify held, the Eyedropper appears wherever the Pencil touches the screen.
Procreate doesn't currently let you summon the Eyedropper just by holding the Pencil on the canvas. If you want that, the Procreate community's feature-request threads are where the developers track demand. The Modify-button method is the closest workaround.
Other options on this screen vary by Procreate version, so look through the panel and test what your install offers.
Use the Color panel to refine what you sampled
Tap the Active Color swatch to open the Color panel. It has five tabs along the bottom.
Disc
The default view: an outer hue ring around an inner saturation disc you can zoom for fine control. Drag the reticle to pick. While you drag the smaller secondary reticle, a split circle shows the color you're over (right) beside your most recent history color (left), so you can compare before committing.
Classic
Hue, Saturation, and Brightness sliders with a standard square picker. If you're used to the color pickers in other creative apps, this is the closest match.
Harmony
Suggests color relationships based on your current selection. It's a quick way to build supporting colors around a hero color you've sampled.
Value
Precision sliders with numerical and hexadecimal values. This is the tab to use when exact matching matters, and the one to copy from when you need a color in another app.
Palettes
Sets of swatches. Procreate ships with several, and you can import palettes or build your own. The active palette also appears at the bottom of the Disc, Classic, Harmony, and Value tabs, so your swatches stay within reach while you adjust.
Use history, primary/secondary colors, and palettes
History holds your last ten colors. A new document starts empty, and each new color bumps the oldest one out. Use it as a short-term scratchpad when you're sampling several colors from a reference in a row. Tap Clear to reset it. On smaller iPads, an ellipsis button lets you switch the bottom strip between your active palette and your color history.
Primary and secondary colors appear as side-by-side rectangles at the top right of the Color panel, primary on the left. The secondary color is used for color dynamics on brushes.
Palettes are how you make a sample permanent. Once you've sampled the key colors from a reference, save them into a palette so they survive past the ten-color history window. Name palettes after the project, not the date, so you can find them later.
In Procreate Pocket, you can press and hold the Active Color to swap between your current and previous color. It's a fast way to A/B two tones.
A practical sampling workflow for reference-driven work
For styleframes, boards, and look-development, this routine keeps things tidy:
- Import the reference on its own layer.
- Sample the key colors with the Eyedropper: dominant, shadow, highlight, and accent.
- Check each in the Value tab and note the hex values.
- Save the set to a project palette.
- Hide the reference layer and paint with the palette.
- Re-sample from your own painting as it develops, so you're matching your work against itself rather than drifting from the source.
Keep in mind that the Eyedropper reads what's on the canvas. If the reference has compression artifacts, noise, or film grain, a single sample can land on an unrepresentative pixel. Sample a few nearby points and pick the one that reads as the average.
Watch the color profile when moving to motion software
If your Procreate colors will land in After Effects, Premiere Pro, Blender, Cinema 4D, or Nuke, color management matters more than the picker. A hex value only means something relative to a color space. Decide on your canvas's color profile before you start painting, not after.
Some practical rules:
- Pick the profile deliberately. If the destination project is sRGB and your canvas is in a wider-gamut profile, the same artwork can look different after import.
- Treat hex values as approximate across apps unless you've confirmed both ends use the same profile.
- Check by eye in the destination. Drop the exported PNG into your comp, set your project's color management, and compare it against the iPad.
- Keep a flat swatch chart. Export a small image of your palette with the artwork so you can sample it in the destination app and confirm your colors survived the trip.
Where Styleframe fits after the color work
Procreate is a strong place to settle a look: a few painted keyframes with a locked palette. From there, you can export your painted frames and use them as keyframes or style references in your motion or AI video tools, so your sampled palette and mark-making carry forward instead of being replaced by a default look.
After generating, verify color in your compositing app against your swatch chart. AI-driven style transfer interprets references rather than copying pixels, so confirm the palette landed where you intended and do final matching in your grade.
Troubleshooting common issues
- Eyedropper doesn't appear: Check Gesture controls > Eyedropper to confirm a trigger method is enabled, and that it isn't conflicting with another gesture.
- Wrong color sampled: You may be hovering over a different layer's content, or on a noisy part of the image. Zoom in and sample a cleaner area.
- Can't use the Pencil to sample: Holding the Pencil alone won't invoke it. Use Pencil double-tap (second-generation Pencil) or the Modify-button method.
- Lost a sampled color: History holds only ten colors. Save important colors to a palette immediately.
- Colors look different elsewhere: Compare the canvas color profile with your destination project's color settings.
Quick reference
Once the Eyedropper is on a trigger that suits your hands and you save samples to palettes as you go, color picking in Procreate becomes a background habit. The remaining care is in color-space decisions, so your colors survive the move into your motion pipeline.