How to Use Color in Procreate
StyleFrame Team8 min read
Procreate handles color through the Colors panel, which offers five modes (Disc, Classic, Harmony, Value, and Palettes) for choosing and saving colors, and through fill tools such as ColorDrop, Recolor, Selections Color Fill, and Fill Layer for applying them. The cleanest workflow is to keep line art on its own layer, paint color on separate layers underneath or in Multiply mode, and save your colors to a palette so they stay consistent across the project. For motion work, this makes Procreate a fast place to build palettes and style frames before they move into After Effects, Cinema 4D, or Nuke.
Start with the Colors Panel
Tap the color circle in the top right to open the Colors panel. The mode tabs along the bottom change how you select color, and each suits a different job.
- Disc: The default. An outer hue ring surrounds an inner saturation disc you can zoom into for fine control.
- Classic: Hue, saturation, and brightness sliders plus a square picker. Good if you're used to the picker in After Effects or Photoshop.
- Harmony: Suggests related colors based on your current selection. Useful when you need a palette direction quickly.
- Value: Precision sliders with numeric and hexadecimal readouts. Use this to match brand colors or to enter values from a style guide.
- Palettes: Swatch sets. Procreate ships with several, and you can import or build your own.
Three smaller features save time:
- Primary and secondary colors: The paired rectangles in the panel's top right hold two colors. The secondary color is used by Color Dynamics in brush settings.
- Color History: The last ten colors you've used. Because it only holds ten, it's a scratchpad rather than storage.
- Split reticle: Dragging the smaller reticle shows the color you're hovering over beside your most recent history color, so you can compare a new choice to the previous one.
Build and Save a Palette
Palettes are the main way to keep color consistent. A saved palette also gives you a record of the project's colors that you can hand to a colleague.
- Open the Colors panel and go to Palettes.
- Tap the + icon and choose Create New Palette.
- Tap empty squares to save your current color into them.
You can also build a palette from existing imagery. In the same + menu, choose the option to create a palette from a file, photo, or camera. Procreate samples colors from the image, which works well when you have a client reference frame, a photograph, or a mood board and want its colors in your canvas. You can also import palettes in the .swatches format.
Keep palettes small and purposeful. A style frame usually needs a dominant color, a supporting color, an accent, and a few neutrals. Name the palette after the project so it's easy to find later.
Set Up Layers Before You Color
Most color problems in Procreate are really layer problems. Set up the file before you fill anything.
- Keep line art separate. Lock the line art layer by swiping it left in the Layers panel and choosing Lock. This prevents accidental edits.
- Paint on new layers. Add a layer for each major color area, such as background, character, props, and lighting.
- Place color layers underneath the line art if the line art has a transparent background. Your lines stay visible and your color never covers them.
- Use Multiply for color above the lines. If your color layer sits above the line art, set its blend mode to Multiply (tap the "N" on the layer) so the dark lines show through.
- Handle white-background line art. If a drawing came in with an opaque white background, change its blend mode to Darken so the layers below show through.
This separation is also what makes later edits easy. A shift in the palette becomes a change on one layer instead of a repaint.
Fill Areas Quickly
Procreate offers several ways to fill, and the right one depends on how clean your shapes are.
ColorDrop and Continue Filling
ColorDrop works like a paint bucket you drag into place. Drag the current color from the top right into an enclosed area and keep holding. Then drag left or right to change the threshold, which controls how aggressively the fill spreads. Lift the Pencil or finger to commit.
After a drop, tap Continue Filling to fill other areas with simple taps. You can still hold and drag to adjust the threshold. Tap the tick or switch tools to exit.
Reference Layer Fills
For line art that lives on one layer, set it as a Reference layer. Then, with a new empty layer selected, ColorDrop fills according to the line art rather than the layer you're painting on. Your color goes onto its own layer and your lines stay untouched. This is the most reliable method for flat coloring.
If a fill leaves a thin halo along the edges, raise the threshold slightly or close any gaps in the line art.
Recolor
Recolor is an older feature that Procreate brought back. It's off by default and is accessed through QuickMenu. To enable it, go to Actions → Prefs → Gesture Controls → QuickMenu and choose how to trigger it. Assign Recolor to one of the radial options. Then pick a color, tap the areas to change, and use the Flood slider to adjust how far each fill spreads. It's an alternative to ColorDrop that some artists prefer for repainting existing areas.
Selections with Color Fill
Under Selections, turn on Color Fill. Pick a selection method (Automatic, Freehand, Rectangle, or Ellipse), choose a color, and the selection fills as soon as you complete it. Two cautions apply:
- Color Fill only works on a single layer, not a group.
- The setting persists after you exit Selections, so turn it off when you're done or you'll fill things by accident.
Fill Layer
Open a layer's options (tap the layer twice) and choose Fill Layer to flood the entire layer with your current color. Combined with a selection or mask, this is a quick way to make solid backgrounds or color-block layers.
Paint With Color Rather Than Just Fill It
Flat fills give you a base. Painting is how you add depth.
- Choose a brush from the Brush Library. Inking, Painting, and Airbrushing sets cover most needs.
- Block in large areas first, starting with the background, then the main subject, then smaller details.
- Add shadows and highlights on separate layers. Multiply works well for shadows, and lighter blend modes work for highlights.
- Clip shading layers to the base color layer so your shading stays inside the shape.
If you struggle with palettes, start from a limited set and use Harmony to explore variations, or pull colors from a reference photo into a new palette.
Adjust Color After the Fact
Procreate's Adjustments menu lets you change color without repainting.
- Hue, Saturation, Brightness: Shift an entire layer's color, or desaturate a scanned sketch before coloring it.
- Curves: Control contrast and tone. For photographed sketches, pull the white point until the paper turns white, then clean up remaining marks with the eraser.
- Layer-level adjustments: Because your colors live on separate layers, you can adjust one area without touching the others.
If you work from a scanned or photographed sketch, desaturate it first, then use Curves to clean the background. That gives you cleaner line art to color on top of.
Check Color Before You Leave Procreate
If the frame is going into a motion pipeline, color accuracy matters as much as color choice.
- Check your color settings. Match them to the working space you'll use in After Effects, Premiere Pro, or Nuke so colors don't shift on import.
- Use the Value tab for exact numbers. If a client has specified hex values, enter them directly instead of eyeballing.
- Export in a format that preserves layers if you need them. A layered file lets you move line art, color, and shading into After Effects as separate elements. A flat PNG works for reference or approval.
- Test on a calibrated display. An iPad screen is not a grading monitor, so check the final color on your main workstation.
Take Procreate Color Into a Motion Pipeline
Procreate is strongest at the earliest stage: finding the look. A palette, a few style frames, and a set of layered illustrations can be built quickly, then carried into After Effects for animation or into Cinema 4D and Blender as texture and reference.
Once you have a locked look, the challenge is extending it across motion. This is where can fit, using your Procreate frames as reference images so your palette and linework carry through into motion work. You keep your compositing workflow, and Procreate remains where the color decisions are made.
A Simple Color Workflow to Follow
- Set up the canvas and color settings to match your delivery pipeline.
- Build a palette from a reference or from scratch, and save it.
- Separate layers: line art locked, color on its own layers.
- Block in color with ColorDrop using a reference layer.
- Add shading and highlights on clipped layers with blend modes.
- Adjust with Hue, Saturation, Brightness and Curves as needed.
- Export layered or flat, depending on where it goes next.
Following this order keeps the file flexible, so a client's note about changing the main color becomes a one-layer fix rather than a repaint.