How to Use Canvas Procreate
StyleFrame Team8 min read
To use a canvas in Procreate, tap the + at the top right of the Gallery, choose a preset such as Screen Size, Square, 4K, A4, 4 x 6 Photo, or US Paper, or tap the rectangle-with-plus icon to build a Custom Canvas. In the Custom Canvas screen you set the name, width, height, DPI, color profile, time-lapse recording, and canvas properties. After the canvas is open, you can change its size and shape from Actions > Canvas > Crop and Resize. For motion and video work, set the canvas in pixels at your delivery resolution before you draw anything.
Create a New Canvas in Procreate
- Open the Procreate Gallery.
- Tap the + at the top right to open the New Canvas menu.
- Tap a preset to open it immediately, or tap the rectangle-with-plus icon to open the Custom Canvas screen.
- Adjust the settings, name the canvas, and tap Create.
Presets are fine for quick sketches, but they are not tuned for video. To change one, swipe left on it and tap Edit to open the same Custom Canvas interface. Your edited preset stays in the list, so you only build a project template once.
Custom Canvas Settings That Matter
The Custom Canvas screen has five areas: name, dimensions, color profile, time-lapse settings, and canvas properties. Each one has consequences further down the pipeline.
Name
Tap "Untitled Canvas" at the top and type a name, or write it with Apple Pencil using Scribble. For anything that will end up in a comp, use a naming convention you can match to your project folders (for example, shotname_boardframe_v01).
Dimensions
Tap Width, Height, or DPI and enter a value on the keypad. You can switch units between millimeters, centimeters, inches, and pixels using the buttons beside the keypad. Motion artists should work in pixels so the canvas maps one-to-one to a composition.
Size also controls how many layers you get. Procreate caps layers per canvas, and larger canvases allow fewer layers. The Custom Canvas screen shows the maximum for your current dimensions. Canvas size can run from 1 x 1 pixels up to 16K in one direction, depending on your iPad model.
That tradeoff shapes how you plan a piece:
- UHD (3840 x 2160) gives you delivery-ready resolution but fewer layers. Use it for final key art or a single hero frame.
- HD (1920 x 1080) leaves more layers for complex separations and is easier on older iPads.
- Oversized canvases make sense when you plan to push in or pan across the artwork in After Effects, but you pay for them in layer count.
Color Profile
Procreate offers RGB for screens and CMYK for print, and it ships with seventeen color profiles. The defaults are Display P3 and Generic CMYK. For video, stay in RGB. Display P3 allows more saturated greens, reds, and oranges, which can look great on an iPad but may shift when the artwork lands in a different working space in your compositor. Check the list for a profile that matches your project's working space, and use Import to add your own profile if you need one. Before committing to a long piece, export a test frame and compare it in your comp against the on-screen version.
Time-Lapse Settings
Procreate can record your progress and play it back as a time-lapse video. You can configure this at canvas creation. For process reels or client breakdowns, leave it on. If you are working on confidential frames, check the settings before you start.
Resize, Crop, and Rotate an Existing Canvas
Plans change, and Procreate lets you reshape the canvas later. Tap Actions > Canvas > Crop and Resize. A grid overlay appears, and its edges are the new edges of your canvas.
- Freeform crop: drag a side to stretch along one axis, or a corner to change both. The width and height readouts update live.
- Uniform crop: tap the Aspect Lock (the chain-link button) so the ratio stays fixed while you scale.
- Numerical crop: tap the width or height readout and type exact values in your chosen unit.
- Rotation: use the slider in the bottom toolbar to rotate the canvas relative to the crop area.
- Layer readout: the notification bar shows how many layers the new size supports. You cannot drag past the maximum size your hardware allows.
DPI and Resample
DPI is a print measurement. Changing it alters the physical size of your canvas in inches or millimeters, not the pixel dimensions. For video delivery, pixel dimensions are what count, so don't spend time tuning DPI unless the artwork is also going to print. Procreate's own guidance is 300 DPI minimum for print and 72–144 for screen viewing.
If you want to scale the content itself, toggle Resample on in Crop and Resize. Resampling up from a small canvas will not add real detail, so build at the size you need from the start where possible.
Use Canvas Tools for Composition and Animation
The same Canvas menu in Actions holds tools that matter for storyboarding and frame work:
- Flip: flip the canvas. This is a fast way to catch composition and drawing problems.
- Drawing Guide: turn on drawing guides to build layouts with consistent geometry.
- Animation Assist: switch on Procreate's animation tools for simple hand-drawn animation. It works for animatics, loops, and quick motion tests, though it is not a substitute for a dedicated animation tool when you need complex timing.
- Canvas information: check dimensions and other technical details of the artwork.
Add Textures and Reference to the Canvas
You can bring a texture into your canvas as an image.
- Tap Actions (wrench) > Add > Insert a photo (or Insert a file if the texture lives in Files).
- Resize and place it on its own layer.
- Set the layer's blend mode to Multiply or Overlay.
- Lower opacity until the texture reads without dulling your colors.
Any texture layer will affect the colors beneath it. A common fix is to use the same texture twice: once on Multiply to make it visible, and once on Overlay above it to recover brightness. Both layers usually work at low opacity if you want subtlety. Dragging an image in from another app in Split View also works.
Side-by-Side Reference Setup
If you paint from a reference, you can build both onto one canvas:
- Create a wide canvas (one tutorial uses 5000 x 3500 pixels at 300 DPI).
- Insert the reference photo and scale it to fill about half the canvas, with uniform transform and snapping on.
- Duplicate the layer, turn on Alpha Lock for the copy, and drag it across so it aligns perfectly beside the original.
- Fill the copy with a background color using a large soft brush.
The two halves are now exactly the same size, which makes it easier to check proportions and negative space.
Get Procreate Artwork Into an Motion Pipeline
Many motion designers use Procreate for boards, style frames, character designs, textures, and hand-drawn elements, then move the results into After Effects, Premiere Pro, Cinema 4D, Blender, or Nuke. A few habits make that handoff smoother:
- Keep everything on named layers. Separate foreground, midground, background, and effects elements so you can animate them independently in a comp. Check Procreate's export options for a format that preserves your layers.
- Match aspect ratio to your comp before you start. Cropping later costs you pixels and sometimes layers.
- Use transparent backgrounds for assets you intend to overlay, and hide the background color layer on export.
- Test your color pipeline once. Export a single frame, import it into your compositor, and compare. Do this before building a full project.
- Export in stages. Save a flattened reference alongside the layered file so you can always check what the artwork should look like.
Where Styleframe Fits After the Canvas
A Procreate canvas is a good place to design the frames that define a shot: a start frame, an end frame, a key pose, a style reference. Those drawn frames can serve as reference input for AI video and motion tools such as .
Common Canvas Mistakes to Avoid
- Starting too small: upscaling afterward softens linework and textures.
- Starting too large: a huge canvas limits your layers.
- Ignoring layer limits: check the maximum before you plan a complex separation.
- Confusing DPI with resolution: for video, pixel dimensions decide quality.
- Assuming color will match: verify Display P3 artwork in your compositor before delivery.
- Flattening too early: keep layers until the comp is approved.
Quick Setup Checklist
- Tap + in the Gallery, then the custom canvas icon.
- Name it and set the unit to pixels.
- Enter your delivery width and height, and check the layer maximum.
- Choose an RGB color profile suited to your pipeline.
- Decide whether to record a time-lapse.
- Create the canvas, and set up Drawing Guides if you need them.
- Work on separate, named layers.
- Export a test frame to your compositor before going deep.
Set the canvas correctly once, save it as a preset, and every project after it starts from a size and color setup you already trust.