How to Use Apple Pen on Procreate
StyleFrame Team7 min read
To use Apple Pencil in Procreate, pair it with your iPad (not inside Procreate), open a canvas, and draw. Procreate's brushes read pressure and tilt natively, and Apple Pencil Pro adds squeeze and barrel roll. If strokes feel too heavy or too light, adjust the app-wide pressure curve or a single brush's Pencil settings. If nothing draws, the cause is usually a pairing, nib, eraser-mode, or gesture setting rather than a broken Pencil.
Pair Apple Pencil with your iPad, not Procreate
Procreate has no pairing step. Pair the Pencil with your iPad, open Procreate, and start drawing. The Pencil won't appear as a listed device inside the app, and that is normal. Older forum advice about picking a stylus type in the Devices menu applies to third-party styluses, not Apple Pencil. If that menu is open, leave it on "None."
Pairing depends on the model:
- Apple Pencil (1st gen): plug it into the iPad's Lightning port.
- Apple Pencil (2nd gen) and Apple Pencil Pro: pair them with your iPad using Apple's pairing method for your model.
Check that Bluetooth is on and that the Pencil shows as connected in iPad Settings. Then create a new canvas, pick a brush, and make a mark.
How pressure, tilt, and rotation shape your strokes
Procreate's default brushes are tuned for Apple Pencil, so you can draw before touching any settings. The Pencil registers small changes in pressure and tilt, and Apple Pencil Pro adds squeeze and barrel roll.
The real control is in Brush Studio. Double-tap a brush in the Brushes panel to open its settings, then look at the Apple Pencil options. You can tie input to brush behavior in several ways:
- Pressure to size: press harder for a thicker line.
- Tilt to opacity: a solid line when the Pencil is upright that fades as you tilt it.
- Tilt to scatter or pressure to color change: more textured, painterly behavior.
- Barrel roll to hue or shape (Apple Pencil Pro): rotating the barrel changes color or shape.
For motion work, a few brushes tuned this way are worth building once. A tight inking brush for animation line work, a tilt-sensitive shader for form, and a textured brush for grain overlays cover most needs.
Set up the double-tap and squeeze shortcuts
Shortcuts keep your hand on the canvas instead of reaching for the sidebar. Double-tap works on the 2nd-gen Pencil and Apple Pencil Pro. Squeeze is exclusive to Apple Pencil Pro.
You can set the double-tap action in two places.
iPadOS Settings > Apple Pencil offers:
- Switch between current tool and eraser (the default)
- Switch between current tool and last used
- Show color palette
- Off
Procreate's Gesture Controls offers app-specific actions such as:
- Toggle Drawing Assist
- Invoke Eyedropper
- Trigger QuickShape
- Invoke QuickMenu
- Toggle Full Screen
- Clear Layer
- Invoke the Copy Paste menu
For line work, "current tool and eraser" is hard to beat. If you accidentally trigger it, set double-tap to Off in iPadOS settings. Apple Pencil Pro owners can also adjust squeeze sensitivity there, and "only draw with Apple Pencil" prevents stray palm and finger marks. Note that turning double-tap off at the system level also disables it inside Procreate.
Adjust the pressure curve to match your hand
The Apple Pencil has a wide dynamic range, so you may have to press hard to reach full opacity or size. Lighter-handed artists often never reach the top of the range with default settings.
Procreate lets you reshape this response in two places:
- App-wide pressure curve: open Actions (the wrench icon), go to Prefs, and find the pressure curve controls. Menu labels shift between Procreate versions, so look for the pressure curve or pressure and smoothing options.
- Per-brush pressure: open a brush's settings and use the Apple Pencil section to tune how that brush reacts.
Community advice from experienced users is a useful starting point. Painterly brushes tend to feel natural with a default or convex curve, while inking brushes often feel better with a concave curve. Treat that as a starting point and adjust by feel. If a brush looks faint, also check its opacity and size sliders in the sidebar, since some brushes need higher opacity values to feel right under the Pencil.
Use Scribble for text fields
Scribble lets you write with Apple Pencil in any text or number field, and Procreate supports it. You can name layers, type percentages in Brush Studio, and enter text with the Add Text tool. It saves trips to the keyboard when you're organizing a file with many layers.
Troubleshoot an Apple Pencil that won't draw in Procreate
A common complaint is a Pencil that works in other apps and even selects brushes in Procreate, but leaves no marks. Work through the causes in order, from the simplest.
- Check for eraser mode. An accidental double-tap can switch you to the eraser. On a white canvas, you won't notice. Watch the size slider, or tap the brush again to confirm what you're using.
- Check size, opacity, and color. Max out the size and opacity sliders, confirm the color isn't matching your background, and try a simple brush like the Technical Pen from the Inking set.
- Check Gesture Controls. In Actions > Prefs, open Gesture Controls and make sure both Apple Pencil and Touch are set to "Selected Tool."
- Tighten the nib. A loose nib is a surprisingly common culprit. Unscrew it, clear any dust, and screw it back on firmly. Replace the nib if the problem persists.
- Re-pair the Pencil. Unpair it in iPad Bluetooth settings, then pair again using the method for your model.
- Check the pressure curve and brush settings. Some users report that adjusting a brush's Pencil settings fixed sporadic or missing strokes. Try a reset, then reapply changes gradually.
- Test the hardware. If the Pencil still fails only in Procreate, have it tested at an Apple Store against another Pencil on your iPad.
Also update Procreate and iPadOS first. That's quick and rules out version problems.
Where Apple Pencil and Procreate fit in a motion pipeline
Procreate is not a compositing tool, but it works well for the drawing stages that come before After Effects, Nuke, or Blender. Typical uses include:
- Storyboards and animatics: sketch compositions quickly, then time them in Premiere Pro or After Effects.
- Style frames and concept art: paint key looks to show a client before building anything in 3D.
- Hand-drawn elements: draw textures, smears, burst shapes, and line-boil passes on transparent layers.
- Frame-by-frame animation: draw short hand-drawn loops.
- Matte and paint-out references: mark up stills when planning cleanup, roto, or comp work.
Export in a format that matches your destination, and check which formats your compositing app accepts. Name layers with Scribble before export so your comp stays readable.
Work at a canvas size and color profile suited to where the art will land. If it's going into a 4K comp, build the canvas big enough that you aren't upscaling hand-drawn lines later.
Turning your Procreate drawings into motion with Styleframe
Once you've drawn frames you like, the next challenge is making them move without redrawing every in-between. Styleframe is an AI video and motion tool built around artistic control rather than one-click output. Your Procreate frames can act as direct inputs:
- Frames-to-Video: use two or more drawn frames as keyframes and let the tool generate motion between them, so your drawing decides the start and end of a move.
- Restyle and Ink-and-Paint: apply a reference-driven look to footage or renders, using a Procreate painting or inked frame as the style reference.
- 2D-to-3D and Turntable: take a character or object drawing into a 3D-style view and generate a rotation.
- Remove Background and 4K Upscale: clean up elements and bring output to production-ready 4K.
Every generation is driven by reference images, video clips, and keyframes, and iteration is non-destructive, so you can try several passes without losing earlier ones.
Quick checklist
- Pair the Pencil with the iPad, not inside Procreate.
- Open a canvas and test with a simple inking brush.
- Set double-tap in iPadOS Settings or Procreate Gesture Controls.
- Tune the pressure curve app-wide, then per brush.
- If nothing draws, check eraser mode, sliders, Gesture Controls, and the nib.
- Export in a format your compositing app accepts, and use drawn frames as keyframes or style references in Styleframe when you need motion.
Once the Pencil is paired and the pressure curve fits your hand, most of the setup work is done. After that, brush building and a clean export routine make Procreate a dependable front end for the rest of your motion pipeline.