How to Turn Procreate Into Stickers
StyleFrame Team8 min read
To turn Procreate art into stickers, draw on a 300 ppi canvas sized for the final print, add a solid border on a layer beneath the artwork, and hide the background layer. Export a transparent PNG for digital stickers, or a PDF or PNG with a cutline for printing. From there, you can print at home and cut by hand or with a Cricut-style machine, or send the file to a print shop.
The workflow is simple, but a few early choices (canvas size, color profile, outline method) decide whether the sticker comes out clean or needs rework. This guide covers those choices and what to do when the sticker needs to move.
Step 1: Set up the canvas for the sticker size
Decide the final physical size before you draw. Most die-cut stickers fall between about 2.5" and 5". If you plan to print a full sheet, a US Letter canvas (8.5" × 11") works well.
- Resolution: Use 300 ppi. Procreate is raster-based, so you can't scale up later without losing detail.
- Canvas size: Work larger than the final sticker if you might reuse the art for other formats. A 10" × 8" canvas for a 3–4" sticker leaves room to scale down.
- Color profile: Procreate defaults to RGB. If your printer asks for CMYK, set the profile when you create the canvas so colors don't shift when the printer converts them. If you're only making digital stickers, RGB is fine.
- Cricut or cutter limits: If you'll cut with a machine, check its software's maximum print size first. Some tools cap the printable area, so a canvas that matches that limit saves resizing later.
If you need a real-world scale reference, drop a photo of a ruler or a one-inch box layer into the canvas and lower its opacity. Procreate has no on-canvas ruler, so this helps you check physical size while drawing.
Step 2: Draw the design on separate layers
Build each element on its own layer: linework, fills, shading, text, texture. This keeps edits cheap while you're still iterating.
When the design is final, duplicate the document or the layer group. Merge the layers of each sticker in the copy and keep the layered original as your master. Everything downstream (outlines, exports, any animation) should come from the master so you can always go back.
Some practical drawing notes:
- Keep shapes bold and readable at small sizes. Hairline details disappear at 2".
- Leave breathing room around each sticker if you're laying out a sheet.
- Avoid very thin protrusions (tails, antennae, tendrils). They're fragile in a die-cut and awkward for cutting machines.
Step 3: Add the sticker border
A sticker's border, often white, is the margin of material around the art. It also gives the cutter a forgiving edge. There are two reliable ways to build it in Procreate.
Option A: Trace with a monoline brush
Create a new layer below the flattened sticker. Using the Monoline brush (in the Calligraphy set), trace around the edge of the design in white or your border color. Then fill the shape with the same color. This works best on simple, rounded designs.
Option B: Gaussian Blur offset
This is faster and cleaner for complex silhouettes.
- Duplicate the flattened sticker layer.
- Turn on Alpha Lock for the lower duplicate and fill it with your border color (tap the layer and choose Fill Layer).
- Turn Alpha Lock off.
- With the lower layer selected, open Adjustments and choose Gaussian Blur, then drag until the blur extends as far as you want the border.
- Use the Selection tool in Automatic mode with Color Fill, then tap the blurred area and drag to fill it with solid color.
The result is a smooth, even border that follows the shape's contour. Check that the border has no gaps or tiny holes, since those show up in the cut.
Cutlines
If a print shop adds cutlines for you, you usually only need the border. If you're printing at home or using a cutting machine, you may need to supply your own cutline: a separate path or a flat shape slightly inside or at the edge of the border. Keep the cutline on its own layer so you can show, hide, or export it independently.
Step 4: Export the right file
What you export depends on where the sticker is going.
To export a transparent PNG, hide the Background Color layer in the Layers panel before exporting. Otherwise Procreate exports a flat colored background. Check the file in a viewer that shows transparency to make sure no stray pixels or halos remain along the border.
If you're laying out a sheet, arrange the individual stickers on a single canvas with even spacing, or build the sheet in a layout tool and import your exported PNGs.
Step 5: Print and cut
There are three common routes.
- Home printing and hand cutting. Print on sticker paper at the highest quality setting and cut with scissors along the border. The white border hides small cutting errors.
- Printing and cutting with a machine. Upload the PNG into the machine's software, which detects the edge or uses your cutline. Keep the artwork inside the printable area.
- Professional printing. Order die-cut or kiss-cut stickers from a print shop. Follow their template, color profile, and bleed requirements. Order a sample pack first if color accuracy matters.
Vinyl, matte, and glossy finishes behave differently with saturated colors, so test one sheet before printing a full run.
Making motion stickers from Procreate art
For motion designers, "sticker" often means something that moves: animated stickers for social platforms, lower-thirds with hand-drawn elements, or sticker-style graphics layered into an edit. The static process above still applies: a clean layered master, a solid border, and a transparent export.
Procreate's Animation Assist handles simple frame-by-frame loops. For short, hand-drawn loops that's enough. When you need more (longer motion, a different visual treatment, or a sticker integrated into a video piece), bring the art into your motion pipeline.
Bringing sticker art into After Effects
Export the master layers or the final sticker as transparent PNGs and import them into After Effects (or Nuke for compositing-heavy work). From there:
- Keep the border on its own layer so you can animate the sticker "peel" or add a drop shadow in a controlled way.
- Use 2× or higher resolution than your delivery size so scaling and camera moves stay sharp.
- Precomp each sticker so you can swap or retime variants quickly.
Where Styleframe fits
is an AI video and motion tool. If your sticker needs to live in a video piece, it's one option to explore alongside your existing After Effects or Nuke workflow, while your original Procreate art stays the source of truth.
It's worth being realistic: for a printed sticker, you don't need any of this. Procreate plus a decent printer is all it takes. The motion tools matter only when the sticker is going to live in video.
Common mistakes to avoid
- Working at screen resolution. A 72 ppi canvas looks fine on the iPad and soft in print. Start at 300 ppi.
- Forgetting the color profile. If the shop wants CMYK and you worked in RGB, colors can shift when the shop converts them.
- Exporting with the background on. Always hide the Background Color layer for transparent PNGs.
- Thin or detached details. They tear, curl, or confuse cutting software. Thicken or merge them into the main silhouette.
- Flattening the only copy. Merge layers in a duplicate and keep the layered master.
- Skipping a test print. One sample sheet catches color, size, and cutline problems cheaply.
FAQ
What size should I make a sticker in Procreate? Pick the final printed size first, then work at 300 ppi, ideally slightly larger than final. Common sizes are roughly 2.5" to 5".
How do I add a white border around a sticker? Place a new layer beneath the artwork and either trace the outline with a Monoline brush and fill it, or duplicate the artwork, fill it white with Alpha Lock, and use Gaussian Blur to expand it into an even border.
What file format should I export? Transparent PNG for digital use and most cutting-machine software. PDF or PNG per your printer's template for professional orders.
Can I make animated stickers from Procreate art? Yes. Use Procreate's Animation Assist for simple loops, or export your layered art to After Effects or another motion tool for more complex animation.
Do I need CMYK? Only if you're sending files to a print shop that requests it. For digital stickers or home printing, RGB is usually fine, but follow the printer's specifications when in doubt.