How to Turn Procreate Brushes Into Photoshop Brushes
StyleFrame Team7 min read
Procreate and Photoshop brushes use different engines, so you can't convert one into the other without losing something. You can carry over the brush tip (shape), name, and spacing by running the .brushset through a converter that outputs a Photoshop .abr. You can also unzip the .brushset, pull out each brush's Shape.png, and define it as a Photoshop brush preset. Grain, pressure and tilt response, jitter, and blend behavior have to be rebuilt by hand in Photoshop's Brush Settings panel.
What transfers and what doesn't
An .abr file is a fairly simple container. It stores a sampled tip image, a name, and a spacing value, and little else. A Procreate brush is a bundle of a shape, a grain texture, and a long list of dynamics settings that run on Procreate's own engine. Any conversion is therefore a translation, not a copy.
Some converters claim to preserve more than this, including pressure curves and grain. Treat that as a best-effort mapping and test a few brushes before you trust it with a whole library. Stamps, textures-as-shapes, silhouettes, ink lines, and lettering tips tend to convert well. Heavily grained watercolor or charcoal brushes will arrive as an outline of the original, not its character.
Some brushes can't be converted at all. Procreate can generate a brush from its built-in shape engine, so there is no tip bitmap to hand to Photoshop. A set that converts "12 of 20" brushes is behaving normally.
Method 1: Use a brush converter
This is the fastest route if you have a full .brushset and don't want to process brushes one at a time.
- Get the
.brushset(or.brush) file off your iPad, using AirDrop, iCloud Drive, or Files. - Open a converter. A browser-based
.brushset→.abrtool will do the job. Some run entirely on your device so the file is never uploaded, while others are account-based with monthly limits on free tiers. - Drop in the file and run the conversion.
- Check the report for skipped brushes. Procedural brushes are normally listed by name.
- Download the
.abr. - In Photoshop, open the Brushes panel (Window > Brushes), open the panel menu, and choose Import Brushes…. You can also double-click the
.abrfile.
Before you convert, check two things:
- Licensing. If you bought the brush set, the original license still applies. Converting for your own use is generally fine, but redistributing converted copies is not.
- File handling. Read what the service does with uploaded files. If the brushes are commercial or client-owned, a local, in-browser converter is the safer choice.
Method 2: Extract the tip manually
This method takes longer but gives you full control, and it works when a converter skips a brush or mangles the result.
Unpack the brushset
A .brushset is a ZIP archive with a different extension.
- Copy the file to your computer.
- Change the extension from
.brushsetto.zip(or just unzip it with your archive tool). - Open the extracted folder. Each brush has its own subfolder, usually containing a
Shape.png(the tip) and a small property list holding the name and settings. Some brushes also include a grain texture image.
Brushes nested inside other brushes will have more than one subfolder. Brushes with no Shape.png are procedural, so skip them.
Define the brush in Photoshop
- Open
Shape.pngin Photoshop. - Convert it to grayscale if needed (Image > Mode > Grayscale). Photoshop reads brush tips by luminance, where black is fully opaque paint, white is no paint, and gray is partial opacity. If the tip is white on black, invert it (Ctrl/Cmd+I).
- Choose Edit > Define Brush Preset and name it.
- Test it on a blank canvas.
Very large tips may need to be scaled down. Check your version's limit if the option is grayed out.
Rebuild the behavior
Open Window > Brush Settings and work through the panels that match what the Procreate brush did:
- Brush Tip Shape: set Spacing. Matching the Procreate spacing by eye on a test stroke is usually faster than doing the math.
- Shape Dynamics: map Size Jitter and Angle Jitter to Pen Pressure or Pen Tilt to approximate pressure response.
- Scattering: replaces Procreate's scatter and jitter.
- Texture: load the grain image as a pattern here (Edit > Define Pattern first), then set scale, depth, and blend mode. This is how you approximate Procreate's grain.
- Transfer: Opacity Jitter and Flow Jitter driven by Pen Pressure give you the pressure-to-opacity feel.
Compare side by side, not from memory. Paint the same stroke in Procreate and Photoshop, then tune the settings until the two are close.
Save and export
- In the Brushes panel, create a new brush from the current settings (the small "+" icon at the bottom of the Brush Settings panel).
- Drag finished brushes into a group.
- Right-click the group and choose Export Group… to produce your own
.abr. This is the file you back up or share across machines.
Method 3: Stamp and export a PNG
If you can't extract the file, or the brush came from a source you can't unzip, take the tip straight from Procreate.
- In Procreate, create a transparent canvas (or a white one with black paint).
- Stamp a single dab with the brush at a large size, in black.
- Export as PNG.
- Open it in Photoshop, and follow the Define Brush Preset steps above.
This captures only the visible shape of one dab. Brushes whose look depends on stroke motion, such as dry brushes, will lose what makes them useful. For those, either save a texture sample from a long stroke and use it as a Texture pattern, or rebuild the stroke behavior in Brush Settings.
Troubleshooting
- The brush paints a solid square. The tip has no transparency or luminance variation. Make sure the image is grayscale with a proper black-to-white range, or that the alpha channel is intact.
- The brush looks inverted. Invert the tip before defining the preset.
- Strokes look blobby or chain-like. Spacing is too tight or too loose. Adjust it in Brush Tip Shape.
- Nothing happens when you import. Check the file extension and the converter's output format. Some apps need specific
.abrversions. Older version 2 files open in Photoshop but not in every other app, so if you plan to share the brushes with Clip Studio users, test there as well. - Textures don't repeat properly. Turn on "Texture Each Tip" in the Texture panel only if you want per-dab variation, and check that the pattern tiles cleanly.
Where this matters for motion work
Some motion designers, animators, and compositors reach for Procreate brushes to get hand-made texture, such as ink edges, charcoal, grain, and paint dabs. They then need that texture in a production pipeline built on Photoshop, After Effects, or Nuke.
After Effects' Paint and Brush tools use their own brush system, so don't count on importing .abr files there. The practical route is to paint frames or elements in Photoshop with the converted brushes. Then bring them in as layers or image sequences. For frame-by-frame work, Photoshop's timeline lets you paint straight into animation frames with the converted brush.
Brush conversion preserves the tool but doesn't help you apply the look across hundreds of frames. If the look from your Procreate brushes is what you need, rather than the brush itself, a reference-driven style-transfer tool may be able to carry that look onto motion. It doesn't replace the brush work, and brush-accurate pressure response still comes from Photoshop.
FAQ
Can Photoshop open Procreate .brushset files directly?
No. Convert to .abr with a converter, or unzip the .brushset and define the tips manually.
Can I move Photoshop brushes into Procreate instead? Not with full fidelity. Procreate has its own brush engine, so you can bring in the tip as a PNG and rebuild the dynamics inside Procreate's brush editor.
Why do my converted brushes feel different?
Because .abr stores the tip and spacing, not Procreate's grain and dynamics. Rebuild those in Photoshop's Brush Settings panel and compare against the original strokes.
Is it legal to convert purchased brushes? Usually for personal use, but check the license of each set. Don't redistribute converted copies.
What's the best method? Use a converter for large batches of shape-driven brushes. Use manual extraction when you need precise control, or when a converter skips a brush.