How to Turn Procreate Brushes Into Csp Brushes
StyleFrame Team8 min read
You can't convert Procreate brushes into Clip Studio Paint brushes directly, because Procreate's .brush and .brushset files only work in Procreate, while CSP uses .sut. The reliable workaround is to rebuild the brush: export the brush tip or grain as an image from Procreate, register it in CSP as a brush-tip image material, attach it to a duplicated sub tool, and tune the dynamics by eye. The result approximates the original rather than reproducing it, since the two apps use different brush engines.
Why Procreate brushes don't convert directly
A brush file stores a tip shape, a grain texture, and a set of engine-specific behavior rules: how pressure, tilt, and velocity change size, opacity, and scatter. Procreate and CSP both interpret those rules in their own ways, so there is no one-to-one mapping.
The formats also differ:
- Procreate:
.brush(single) and.brushset(bundle) - Clip Studio Paint:
.sut - Photoshop:
.abr
Dragging a .brushset into CSP's brush panel, or using the "Import sub tool" command, won't produce usable brushes. Artists who've tried this on support forums get an empty result. The forum consensus is that the practical path is to imitate the brush, not convert it.
For motion designers, this matters when a client's illustrator hands over a Procreate texture kit and your team paints or cleans up frames in CSP. Rebuilding once and saving the result as a CSP sub tool gives you a repeatable asset.
What you need before you start
- Procreate on an iPad, with the brush you want to reproduce
- Clip Studio Paint on desktop or iPad (the steps below follow the desktop layout; menu names shift slightly between versions)
- A way to move images between devices, such as AirDrop, cloud storage, or USB
- Permission to reuse the brush. Check the license of any purchased or commissioned brush pack before you rebuild it, even for personal use.
Step-by-step: rebuild a Procreate brush in CSP
1. Capture the brush tip from Procreate
Open the brush in Procreate's Brush Studio and look at the Shape source (and Grain source if the brush uses one). Screenshot the shape preview. For a pencil or chalk brush, the grain often defines most of the character, so capture it too.
If the brush has a clean stamp-like shape, an alternative is to make a single dab on a transparent canvas and export it as a PNG. Either approach gives you a raster tip to work from.
Send the image to your computer.
2. Clean up and invert the tip in CSP
Brush tips in CSP work on tonal values: dark areas lay down paint, light areas don't. A screenshot of a Procreate shape preview usually needs to be flipped, so you'll reverse its tones.
- Open the screenshot in CSP and crop it to just the tip. Keep it square, and resize it to a sensible resolution (large enough to stay crisp, but not huge).
- Duplicate the layer.
- Use Edit → Tonal Correction → Reverse on the duplicate, so the tip reads dark on light.
- Hide the original layer so only the inverted version is visible.
Tidy any stray edges with a levels adjustment if the screenshot picked up UI shadows or anti-aliasing halos.
3. Register the tip as an image material
Convert the cleaned layer to an image material layer and set it to use the dark values only (the "black only" option in the dialog). Then register it:
- Go to Edit → Register Material → Image.
- Give it a name you'll recognize, such as "Procreate 6B tip."
- Select the brush tool option in the dialog.
- Save it to the brush image material category in the material library.
Once registered, the tip is available to any sub tool.
4. Build the sub tool
Start from a similar built-in brush rather than a blank one. A pencil replacement should come from a pencil, a marker from a marker.
- Duplicate an existing sub tool (for example, a default pencil) and name it something clear like "Procreate Pencil."
- Open Sub Tool Detail (the wrench icon) and go to Brush Tip.
- Remove the existing tip shapes.
- Choose Add material and select the image you registered.
At this point the brush will probably look rough, with jitter or wrong density. That's normal.
5. Tune the dynamics to match
Now compare strokes side by side with the Procreate original and adjust:
- Brush size and thickness: Match the dab footprint at your working canvas size.
- Ink/density: Adjust opacity and density so layered strokes build up the way they do in Procreate.
- Spacing (interval): Increase it for a grainy, stippled look; reduce it for smooth lines. Jitter often comes from spacing that is too wide or tip rotation set too freely.
- Pressure influence: Map pressure to size and opacity curves to mirror the original's feel.
- Texture: If the original used a grain, add a paper or texture material under the Texture settings and tune its scale and strength.
- Stabilization and spray effects: Use these for grainy or airbrush-like brushes.
Budget real time here. The tip is quick; the feel takes iteration. Draw the same test stroke, such as a hatch pattern, a light-to-heavy pressure ramp, and a quick scribble, in both apps and compare.
Shortcut: if the pack includes .abr files
Some brush creators ship Photoshop .abr versions alongside Procreate files. Those are worth trying first. Photoshop brushes can sometimes be brought into CSP, though forum reports suggest the results often need setting adjustments because the engines differ. CSP's own support FAQ on importing brushes is the right place to confirm the current supported route for your version. Even in the best case, expect to correct size, spacing, and pressure behavior by hand.
If a pack only contains .brush or .brushset files, use the rebuild method above.
A quick settings checklist for matching feel
When a rebuilt brush looks right but behaves wrong, check these in order:
- Tip polarity (is the tip inverted correctly?)
- Spacing
- Rotation and randomization
- Pressure curves for size and opacity
- Texture scale
- Blending mode (CSP's color mixing differs from Procreate's, which affects how soft brushes feel)
That last point surprises people. Artists in the Procreate community have long noted that CSP's color blending behaves differently, so a perfect tip match can still feel different once you start blending.
Moving brushes into other tools
If your pipeline touches 3D or other paint tools, the situation is slightly better than CSP-to-Procreate:
- Blender: A free community add-on, Paint Brush Importer, reads
.abr,.gbr,.brushset, and.sutfiles and converts them for Texture Paint, Sculpt, Vertex Paint, and Grease Pencil modes. It converts format only, so you're still responsible for the license of the original brushes. - Krita: Krita's engines are unique, and standard imports don't work. Community conversion scripts for
.brush,.abr, and.sutexist but are experimental and extract only limited information.
For Cinema 4D and Nuke users, the brush-tip image is the portable part. Textures and stamps you've extracted as clean PNGs can be reused as alpha stamps or texture maps in other tools.
Where Styleframe fits when brushes aren't the point
Sometimes the reason you want a Procreate brush look in CSP is the finish: a grainy pencil line, a hand-inked edge, a painterly texture carried across a whole sequence. Rebuilding brushes is the right answer for drawing by hand. For applying that look consistently across many frames, a different approach can save time.
is an AI video and motion tool.
It doesn't replace your CSP brushes for hand-drawn work, and it won't convert a brush file. It may be useful when you've already established a look, perhaps with your rebuilt brush on a few key frames, and want to carry that look into motion.
A practical workflow looks like this:
- Rebuild the brush in CSP and paint your hero frames.
- Use those frames as style references and keyframes.
- Generate the in-between motion with your chosen motion tool.
- Export the result and finish in your compositor.
Troubleshooting common problems
The brush paints nothing. The tip is probably inverted. Reverse the tonal values and re-register it.
Edges look fuzzy. The source screenshot was low resolution or anti-aliased. Recapture at a higher zoom or export a dab at larger canvas size.
Strokes look jittery. Reduce rotation randomization and tighten spacing.
The brush feels flat. Add pressure-to-opacity mapping and a texture layer; grain usually supplies the character.
The brush feels like the right shape but the wrong medium. Check blending behavior and color mixing; that's an engine difference, not a tip problem.
Final takeaway
Treat this as a recreation task. Capture the tip, invert it, register it as a material, attach it to a duplicated sub tool, and tune by comparison. Save the finished brush as a CSP sub tool so you only do this once per brush, and keep your reference strokes from the original so you can re-check the feel whenever you adjust settings.