How to Turn Off Drawing Guide Procreate
StyleFrame Team8 min read
To turn off a drawing guide in Procreate, open the Actions menu (wrench icon), tap Canvas, and switch off the Drawing Guide toggle. If your strokes still snap to straight lines or symmetry, Assisted Drawing is still active: turn it off on each affected layer by tapping the layer thumbnail and unchecking Drawing Assist, then check Actions > Prefs > Gesture Controls > Assisted Drawing. Most "stuck" guides come from one of these two places.
The Short Version
- Tap the wrench icon to open Actions.
- Go to Canvas and switch Drawing Guide off. This hides the grid, isometric, perspective, or symmetry overlay.
- Open the Layers panel, tap the thumbnail of any layer marked with Assisted Drawing, and toggle Drawing Assist off.
- Go to Actions > Prefs > Gesture Controls > Assisted Drawing and clear any Touch or Apple Pencil options that force assistance on.
- If strokes are still being corrected, do a hard reboot of the iPad.
The rest of this article explains why each step matters, since the overlay and the behavior are controlled by separate switches.
Why Turning Off the Guide Doesn't Always Stop the Behavior
Procreate treats the guide as two separate things:
- The Drawing Guide is the visible overlay: a 2D grid, isometric grid, perspective lines, or symmetry axes. It is set per canvas.
- Assisted Drawing is the behavior that snaps your strokes to that guide. It is switched on per layer, and it can also be triggered by a gesture preference.
Hiding the overlay with the main Drawing Guide toggle doesn't necessarily switch off Assisted Drawing. You can end up with no visible grid and still get perfectly straight lines, mirrored strokes, or lines converging on a vanishing point you can't see. That's a reason many users report thinking the app is bugged.
Step 1: Turn Off the Drawing Guide on the Canvas
- Open the canvas you're working on.
- Tap the wrench icon (Actions) at the top left.
- Choose the Canvas tab.
- Toggle Drawing Guide off.
The overlay disappears. The guide's configuration is saved with the canvas, so you can turn it back on later without rebuilding it. You only need Edit Drawing Guide if you want to change the guide type or settings.
Note that the Drawing Guide has to have been enabled at least once on a canvas before Assisted Drawing options show up for that canvas. If you're looking for a layer option that isn't there, that's usually why.
Step 2: Turn Off Assisted Drawing on Each Layer
This is the step people miss. Assisted Drawing is a layer-level setting, so one layer can keep snapping strokes after everything else is off.
- Open the Layers panel.
- Look for layers labeled as using Assisted Drawing.
- Tap the layer thumbnail to open the layer options menu.
- Uncheck Drawing Assist.
Go through every layer, including hidden ones, groups, and background layers. A single forgotten layer will keep applying the guide whenever you draw on it. If a stroke looks corrected on one layer but not another, this is the culprit.
Step 3: Check Gesture Controls for Forced Assistance
If you've switched off the guide and every layer but strokes still come out assisted, check your preferences:
- Tap Actions (wrench) > Prefs > Gesture Controls.
- Open Assisted Drawing.
- Turn off any active option for Touch, Apple Pencil, or a combination with the Modify button.
When Apple Pencil or Touch is assigned to Assisted Drawing here, that input can keep drawing assisted lines after you've used a guide, even though the guide and layer toggles look off. If your finger behaves differently from your Pencil, this is the first place to look.
Step 4: Turn Off Symmetry Specifically
Symmetry lives inside the Drawing Guide, so its behavior is controlled the same way, with a couple of extra options.
- Go to Actions > Canvas and tap Edit Drawing Guide.
- Select the Symmetry guide at the bottom of the screen.
- Open Options and review the settings, including Assisted Drawing and Rotational Symmetry.
- Tap Done.
- Return to Actions > Canvas and switch Drawing Guide off.
Then repeat the layer check from Step 2. Symmetry-assisted drawing is applied per layer just like the other guide types, so mirrored strokes can continue on any layer that still has Drawing Assist enabled.
Step 5: Clear Stacked or Messy Perspective Setups
If you've layered several guides or added too many vanishing points and can't get back to a clean setup:
- Go to Actions > Canvas > Edit Drawing Guide.
- Select the Perspective guide.
- Tap a vanishing point to open its menu and delete the ones you don't need. Perspective supports up to three vanishing points.
- Adjust line thickness and color with the sliders if you're keeping the grid.
- Tap Done.
Once the guide is clean, you can keep it, or switch it off from the Canvas menu as above.
Step 6: Hard Reboot if It Still Won't Let Go
If the guide is off, every layer is unchecked, gestures are cleared, and strokes are still being straightened, the app state may be stuck. A normal restart sometimes isn't enough:
- Swipe away all backgrounded apps.
- Perform a hard reboot of your iPad using the button combination for your model.
- Reopen Procreate and test on a new blank layer.
Testing on a new layer helps you work out whether the problem is a layer setting or something broader.
Faster Ways to Toggle Assisted Drawing
If you switch guides on and off frequently, avoid digging through menus each time:
- QuickMenu: assign a QuickMenu slot to Drawing Assist and toggle it with an on-screen gesture.
- Gesture Controls: assign Drawing Assist to a Touch, Apple Pencil, or Modify-button gesture under Prefs > Gesture Controls.
- Layer menu: tap the layer thumbnail to flip Drawing Assist for one layer without opening the guide settings.
One practical point: you can switch the main Drawing Guide toggle off and still keep Assisted Drawing available on layers. That's useful when you want the overlay out of sight but still want to snap strokes on a specific layer. It also means you have to switch both off deliberately when you want fully freehand drawing.
Do Drawing Guides Show Up in Exports?
If you see grid or perspective lines in a flattened export, check whether they were actually drawn onto a layer (for example, traced lines kept for reference). Hide or delete those layers before exporting, and keep construction lines on their own layer so they can be toggled off cleanly.
That layer hygiene matters even more when the artwork is headed into a motion pipeline.
When Your Procreate Art Is Headed for Motion
Many motion designers and animators use Procreate for boards, style frames, texture passes, and hand-drawn elements, then move the work into After Effects, Premiere Pro, Cinema 4D, Blender, or Nuke. A few habits make the handoff easier:
- Separate construction layers. Keep perspective guides, tracing lines, and rough marks on their own layers so you can hide them before export and avoid cleanup in compositing.
- Export layered files when you need to animate parts. Layer separation gives you control over parallax, puppet rigs, and element timing downstream.
- Check for unintended straight lines or mirrored strokes before export. An Assisted Drawing layer you forgot about can leave symmetrical or snapped marks you didn't intend, and they're much more noticeable when the frame is animated or scaled up.
If you're taking hand-drawn frames further, an AI motion tool can fit in after the Procreate stage. It works best when the source art is clean, so clearing stray guide artifacts before you bring art into any such tool saves you from building on top of them.
Troubleshooting Checklist
If the guide still seems active, run through this in order:
- Is Actions > Canvas > Drawing Guide off?
- Is Drawing Assist unchecked on every layer, including hidden layers and groups?
- Are Touch and Apple Pencil cleared under Prefs > Gesture Controls > Assisted Drawing?
- Is a QuickMenu slot or gesture toggling Drawing Assist back on without you noticing?
- Did you check the Symmetry options in Edit Drawing Guide?
- Does a new blank layer behave normally? If yes, the issue is a specific layer. If no, try a hard reboot.
- Are you on a current Procreate version? Older versions had a simpler Perspective Guide before the full Drawing Guide tool was introduced.
FAQ
Why are my lines still straight after I turned off the Drawing Guide?
Assisted Drawing is still active, either on a layer or through a gesture setting. Uncheck Drawing Assist on each layer and clear the Assisted Drawing options in Prefs > Gesture Controls.
Does turning off the Drawing Guide delete my guide settings?
No. The toggle hides the overlay and keeps the configuration for that canvas, so you can re-enable it later.
Why can't I find Drawing Assist on my layers?
The Drawing Guide must have been activated on that canvas at least once. Turn it on under Actions > Canvas, set it up with Edit Drawing Guide, and the layer option will appear. You can then turn the guide off again.
Is there a faster way to toggle this while drawing?
Assign Drawing Assist to a QuickMenu slot or a gesture in Prefs > Gesture Controls so you can switch it on and off without opening menus.