How to Turn Off Drawing Assist Procreate
StyleFrame Team8 min read
To turn off Drawing Assist in Procreate, tap the thumbnail of the layer showing the "Assisted" tag, then tap Drawing Assist in the Layer Options menu to switch it off. Turning off the Drawing Guide toggle on its own does not disable assist on layers that already have it. If your strokes still snap after that, check Actions (wrench) → Prefs → Gesture Controls → Assisted Drawing, where an Apple Pencil or Touch setting can keep triggering assisted lines.
Why Drawing Assist keeps snapping your lines
Drawing Assist works like an invisible ruler. It matches your strokes to whatever Drawing Guide you configured on that canvas, whether that's a 2D grid, isometric, perspective, or symmetry guide. The guide's visibility and the assist behavior are separate controls. You can hide the grid and still have every stroke constrained to it.
That separation explains most "it won't switch off" complaints. Procreate stores assist on a per-layer basis, and it also offers gesture shortcuts that can reactivate it. Several independent switches can each keep it on, so you have to check each one.
Symmetry guides are a common trigger. When you set up a Symmetry guide, Drawing Assist switches on by default. If you were mirroring a character sheet or a logo mark earlier, your later layers may still be assisted.
Method 1: Turn it off on the layer
This is a common fix.
- Open the Layers panel.
- Look for the "Assisted" tag under the layer name.
- Tap the layer once to open Layer Options.
- Tap Drawing Assist to toggle it off.
The Assisted tag should disappear from that layer. Repeat for every layer that shows it.
A common trap: you switch off the guide, most of the canvas behaves, but one layer keeps snapping. That layer still has Drawing Assist enabled. Check every layer in the stack, including hidden ones and layers inside groups. Expand your groups before concluding it isn't a layer issue.
If you only need freehand for a moment, you can instead draw on a normal, unassisted layer above or below the assisted one. This is useful when you've built a perspective grid for a background and want to add loose organic detail on top without touching the setup.
Method 2: Turn it off from the Drawing Guide screen
You can also toggle assist from the guide settings:
- Tap the wrench icon to open the Actions menu.
- Go to Canvas.
- Turn on Drawing Guide if it's currently off. The settings are only reachable while it's on.
- Tap Edit Drawing Guide.
- At the bottom of the screen, switch Assisted Drawing off.
- Tap Done.
This toggle applies to your primary layer. After that, you can switch the Drawing Guide toggle itself off again if you don't want the grid visible.
One quirk worth knowing: Procreate doesn't automatically turn off Assisted Drawing when you switch off the main Drawing Guide toggle. People often wish it did. If you've hidden the guide but assist remains active, you may need to turn the guide back on briefly just to reach the setting, or use one of the faster routes below.
Method 3: Check your Gesture Controls
If assist still seems stuck after you've cleared it from the layers, the cause is often a gesture shortcut:
- Open Actions (wrench icon) → Prefs → Gesture Controls.
- Select Assisted Drawing.
- Turn off any active option, including Apple Pencil and Touch.
With Apple Pencil enabled in that menu, your Pencil can keep drawing assisted lines after you've used a Drawing Guide, even if you've turned off the guide and the layer toggles. If Touch is enabled, your finger does the same. This setting catches people who have checked every layer and still get straight, snapped strokes.
While you're there, you can also decide whether you want a shortcut for toggling assist deliberately. The same menu lets you assign Touch, Apple Pencil, or a combination with the Modify button, so you can flip assist on and off mid-stroke session without opening menus.
Method 4: Use QuickMenu for fast toggling
If you switch between ruled and freehand work constantly, assign Drawing Assist to a QuickMenu slot. You can then toggle it with an on-screen gesture rather than digging through Layers or Actions. It's the practical fix if you're sketching perspective-heavy environments and need to break the rules every few minutes.
Troubleshooting: when it still won't turn off
Work through these in order.
Confirm a guide was ever set on this canvas. Assisted Drawing only becomes available on a canvas once you've activated a Drawing Guide there at least once. If assist appears on one canvas and not another, that's why. Each canvas needs its own setup. After you've done it once, you can hide the guide and still enable assist per layer.
Look for stacked guides. If you accidentally layered several perspective setups on top of one another, you may struggle to clear them. Go to Actions → Canvas → Drawing Guide, tap Edit Drawing Guide, and reconfigure the guide you want. Tap vanishing points to delete the extras.
Check every layer, again. If one layer persists after everything else is off, open its Layer Options and uncheck Drawing Assist. Straight strokes from a brush on a single layer often trace back to this.
Do a hard reboot. If every setting looks correct and strokes are still straight, restart the iPad fully rather than just closing the app. Clear backgrounded apps from multitasking, then use the hardware button combination for your iPad model until the screen goes dark, and power it back on. It's an unglamorous fix, but it's worth trying before you rebuild a file.
Verify your versions. Older Procreate versions had only a Perspective Guide, and the full Drawing Guide tool arrived later with several guide types. If menus don't match what's described here, update Procreate and check your iPadOS version.
Test in a new canvas. If a single file seems stuck in assist mode while others work, duplicate the artwork, then test the same brush in a fresh canvas. If it behaves normally there, the problem may be specific to the original file, and you can copy layers across into a clean document.
Quick reference: where each switch lives
Why this matters in a motion pipeline
If you're a motion designer, animator, or VFX artist, you probably don't live in Procreate. But it shows up in pipelines more than you'd expect: quick storyboard frames, concept paintings, matte painting sketches, perspective studies for environments, and hand-drawn style references before work moves into After Effects, Cinema 4D, Blender, or Nuke.
Drawing Assist is useful for architectural or set-extension sketches, where straight lines and consistent vanishing points matter. It gets in the way for character frames, texture studies, and expressive linework. A good habit is to separate the two on purpose: keep a dedicated assisted layer for structure, and do all expressive work on normal layers. That way you never have to hunt for a stuck setting mid-session, and you can hide or delete the structural layer cleanly before export.
Before exporting, flatten your decision-making as well. Hide guide layers, confirm no assist tags remain on layers you plan to deliver, and export in a format that suits the next tool.
Taking Procreate frames into an AI-assisted workflow with Styleframe
Hand-drawn frames are often the starting point rather than the final product. If you've sketched a key pose or a style reference in Procreate, is a place to carry that work further without surrendering control. It's an AI video and motion tool built around professional artistic direction, not one-click generation.
A few practical ways a Procreate drawing can feed it:
- Frames-to-Video: Use your drawn start and end frames as keyframes, so the motion between them is driven by your artwork rather than a text prompt alone.
- Restyle and Ink-and-Paint: Use a Procreate illustration as the style reference, then apply that look to video clips through reference-driven style transfer.
- 2D-to-3D and Turntable: Convert a clean character or prop drawing into a 3D-style asset and generate a turntable view for design review.
- Remove Background and 4K Upscale: Isolate a drawn element for compositing, and upscale output to production-ready 4K.
This is also where your Drawing Assist cleanup pays off. A reference with unintended snapped, perfectly straight strokes will push a generation toward that look. If your intent was loose and hand-drawn, make sure the frame you supply actually reads that way. Every generation in Styleframe is guided by your reference images, video clips, and keyframes, so the quality of what you feed in shapes what comes out. Iteration is non-destructive, so you can try variations without losing earlier results.
Styleframe fits into existing pipelines rather than replacing them. It exports image sequences, so the output drops into After Effects or Nuke for compositing, grading, and finishing. An After Effects plugin is on the way. Your Procreate frames stay where they belong, as artist-controlled source material, and your compositing workflow stays intact.
Summary checklist
- Tap the layer and switch off Drawing Assist in Layer Options. Do this for every layer showing an Assisted tag.
- Turn off Assisted Drawing in Edit Drawing Guide for the primary layer.
- Disable Apple Pencil and Touch options under Prefs → Gesture Controls → Assisted Drawing.
- Remember that hiding the Drawing Guide doesn't disable assist on layers.
- Remember that Symmetry guides switch assist on by default.
- If nothing works, hard reboot the iPad, check stacked guides, and test in a fresh canvas.
Once you understand that assist lives in three places (the layer, the guide screen, and the gesture preferences), the "won't switch off" problem should be much easier to track down.