How to Turn a Shape Into Lines Procreate
StyleFrame Team8 min read
Procreate has no single "convert shape to outline" button, so you pick a method based on what you're starting with. To draw clean lines from scratch, use QuickShape: sketch the shape, hold the Apple Pencil down until it snaps, then edit it. To turn existing filled artwork or a photo into line art, duplicate the layer, desaturate it, and use a blend mode (Divide or Color Dodge) with Gaussian Blur to reveal the edges. For a true outline of a filled shape, shrink a duplicate and clear it out of the original, or trace the shape on a new layer.
What "Turn a Shape Into Lines" Can Mean in Procreate
People use this phrase for three different jobs, and each needs a different technique:
- Drawing a shape as lines from the start. You want a circle, triangle, or polyline made of strokes rather than a fill. QuickShape handles this.
- Converting an existing flat shape or image into line art. You have filled artwork, a photo, or a reference, and you want only its edges. The blend-mode method handles this.
- Making a hollow outline of a filled shape. You want the filled area removed so only a border remains. This takes a manual cut-out or a trace.
Pick the one that matches your starting point. You can combine them later.
Method 1: Draw Shapes as Lines With QuickShape
QuickShape snaps a rough stroke into a clean geometric form. The result is a stroke in your current brush, so it's already "lines" rather than a filled area.
- Select a brush and a color, and make sure you're on a paint layer.
- Draw a rough version of the shape: a line, rectangle, triangle, circle, or a multi-segment polyline.
- Keep the Apple Pencil (or your finger) held on the screen when you finish. After a brief pause, Procreate cleans up the shape.
- While still holding, drag to adjust size and orientation.
- Touch a second finger to the screen to regularize it further. Triangles snap to equal edges, and lines lock to 15° increments.
After the snap, tap the notification at the top of the screen to open the edit shape menu. There you can switch the shape type, for example from a circle to a square, and use the transformation nodes for finer adjustments. That menu is only available right after you make the shape. If you need changes later, use the Transform tool instead.
If QuickShape triggers when you don't want it, or doesn't trigger at all, open the Actions (wrench) menu, go to Prefs, then Gesture Controls, and adjust or disable it. The delay is configurable there too.
Best for: icons, geometric constructions, perspective grids, and any linework where you want consistent, mechanical edges.
Method 2: Turn Filled Artwork or a Photo Into Line Art
This is a common approach, and it works on photos and flat-color artwork. It exploits blend modes to isolate edges. There are two common variants. Both begin the same way.
Setup: Open the Actions menu, choose Add, then Insert a Photo (or place your shape artwork on its own layer). Fit it to the canvas if you like. Duplicate the layer and hide the original so you always have a clean copy.
Variant A: Divide
- On the duplicate, open Adjustments and choose Hue, Saturation, Brightness. Pull saturation to zero. Nudge brightness if the image is very dark or very light.
- Duplicate that desaturated layer.
- Tap the N on the top layer to open blend modes and choose Divide. The canvas will look blank white.
- With the top layer selected, go to Adjustments, then Gaussian Blur. Slide until lines appear. A small amount, in the low single digits of percent, is a reasonable place to start.
- Merge the two layers down.
- Open Adjustments, then Curves. Drag the bottom-left point to the right to darken the lines. Pull the top-right point slightly left to clean up the white. Don't go too far, or the image inverts or loses detail.
Variant B: Invert and Color Dodge
- Desaturate a duplicate layer as above.
- Duplicate it again. On the top copy, open Curves and flip the curve so it runs downhill instead of uphill. This inverts the tones.
- Set that inverted layer's blend mode to Color Dodge. It's in the Lighten tab of the blend mode panel. The canvas will turn white.
- Apply Gaussian Blur to the inverted layer and adjust until line work appears.
In either variant, the blur amount affects how thick and soft the edges read. Another version of this process inverts first, desaturates, then uses Difference followed by Divide. Results can vary, so choose whichever workflow you can repeat quickly.
Expect Soft Lines
These results are edge detections, not drawn strokes. Compared with a Find Edges filter in a desktop app, they come out softer. Flat shapes with strong value contrast give the cleanest results. Busy photos give noisy ones. Treat the output as a base layer to refine, not a finished line drawing.
Color the Result
The converted layer has a white background, so you can't paint underneath it as-is. Change that layer's blend mode to Multiply (Linear Burn, Color Burn, and Darker Color also work with small differences). Then add a new layer beneath it and paint. The white drops out and your color shows through the lines. Bring back the original layer to compare.
Method 3: Make a Hollow Outline From a Filled Shape
If you need a border only, with the fill gone, do this:
- Duplicate the filled shape layer.
- On the top copy, use Transform (uniform scaling) to shrink the shape slightly toward its center.
- Use the Selection tool in Automatic mode and tap the shrunken shape to select it.
- Switch to the lower layer and use Clear from the layer menu. The inner area is removed and a ring remains.
- Delete or hide the top copy.
Uniform scaling gives even thickness on symmetric shapes like circles and squares. On irregular shapes, the border will vary in width. In that case, trace the outline manually instead (Method 4) or accept the variation as a stylistic choice.
Method 4: Trace the Shape on a New Layer
For the cleanest, most intentional lines, draw them yourself:
- Reduce the opacity of the shape layer, to somewhere around 10 to 15 percent so it's barely visible, and lock it.
- Create a new layer above it for the line work.
- Use a brush with stabilization (Streamline) and pressure sensitivity for tapered strokes. Aim for long, smooth strokes rather than short, sketchy ones.
- Use QuickShape for any straight edges or perfect curves, and hand-draw the organic parts.
Lowering the reference opacity keeps you from copying the underlying edges line for line, which produces more natural results. Work at a higher canvas resolution, since pixelation shows quickly on thin lines. A 300 DPI canvas is a safe default for professional work.
Troubleshooting
- You get a high-contrast black-and-white image with no lines. The blur usually wasn't applied to the layer set to Divide or Color Dodge. Check that the right layer is selected and the blend mode is active.
- The canvas won't turn white. Confirm the layer is desaturated before the blend mode step and that the curve inversion actually flipped. A color tint in the result usually means desaturation was skipped.
- You can't find blend modes. Tap the small letter on the layer thumbnail, near the visibility checkbox. The letter shows the active mode.
- Lines are too faint. Use Curves to push the bottom point right and darken them, or reduce the blur.
- Lines are too thick or muddy. Lower the Gaussian Blur amount.
Getting Procreate Lines Into After Effects
Once your line art is ready, a few export choices will determine how easy it is to animate.
- Export with transparency. Hide the background layer and export as PNG so the lines sit on transparency. If you need to keep layers separate, export as PSD.
- Convert to vectors if you need clean scaling. Procreate output is raster. You can trace raster line art into vector paths in a vector or motion-graphics tool, which gives you more control over line weight.
- Match your resolution to your comp. Line art drawn on a small canvas will soften when scaled up in a 4K composition. Draw large, or plan to trace to vectors.
For stylized motion work, that last step often matters more than the Procreate technique itself. A raster blend-mode result is fine for reference or stills. For animated line reveals, vectors are easier to control.
Where Styleframe Fits
Procreate's line conversion works on a single still, and it takes manual steps each time. If your goal is a line-art or ink-and-paint look across moving footage or a sequence of frames, you need something that holds the style together over time. Styleframe is an AI video and motion tool aimed at that kind of work.
A practical split: use Procreate for hand-drawn line work and keyframes you want to control precisely, then use Styleframe to carry that look into motion or restyle footage, and finish the comp in your usual pipeline.
Quick Reference
Start with the method that matches your source, and treat any automated result as a base to refine rather than a finished piece.