How to Switch Procreate from Landscape to Portrait
StyleFrame Team8 min read
Procreate has no one-tap orientation switch for an existing canvas, so you change it by resizing. Open the artwork, go to Actions (wrench) > Canvas > Crop & Resize, then swap the width and height values in Settings and position the artwork before confirming. If cropping would cost you artwork, create a new portrait canvas, copy your layers across, and rotate them 90° with the Transform tool. Always duplicate the file in the Gallery first, because resizing can permanently clip anything that falls outside the new frame.
Canvas orientation vs. screen orientation
Two different things get called "orientation" in Procreate, and mixing them up causes most of the confusion.
- iPad screen orientation: how the interface is oriented as you hold the device. This is controlled by iPadOS. The Rotation Lock toggle in Control Center decides whether the UI follows the device.
- Canvas view rotation: how you are looking at your document right now. You can twist the canvas with two fingers, and it doesn't change the document. It only changes your viewing angle.
- Document orientation: the actual pixel dimensions of the file. A 3000 × 2000 px canvas is landscape, and a 2000 × 3000 px canvas is portrait. This is the one you change when you "switch to portrait."
If your canvas looks sideways but the dimensions are fine, you only need to rotate the view. Pinch-twist to turn it, or pinch quickly to zoom out and fit the canvas to the screen. If you want to stop accidental rotation while zooming, Procreate's settings in the iPadOS Settings app include a Rotate With Pinch Zoom toggle. Turning it off prevents rotation by pinch, so you will need it on whenever you want to rotate the canvas freely.
Method 1: Swap dimensions with Crop & Resize
This is the fastest route and works well when the composition has some breathing room.
- In the Gallery, swipe left on the artwork and tap Duplicate. Work on the copy.
- Open the copy, tap Actions (wrench) > Canvas > Crop & Resize.
- Tap Settings to see the width and height fields.
- Swap the values. A 3000 × 2000 px canvas becomes 2000 × 3000 px.
- Drag the artwork inside the frame to choose what stays visible, then tap Done.
Menu names can shift slightly between Procreate versions.
Watch the Resample Canvas toggle
Inside the settings, Resample Canvas controls whether the artwork is scaled to fit the new numbers. With it off, the pixels stay at their original size and the frame changes around them, so anything outside the new frame is clipped. With it on, the artwork is stretched to match the new proportions, which usually distorts it. For an orientation change, you almost always want it off.
What gets lost
Going from landscape to portrait at the same pixel count generally means your width shrinks. Anything past the new edges is cropped away when you confirm. Users in Procreate's community forums have reported "losing half a piece" after an accidental transform or crop and a trip back to the Gallery. That's why duplicating before any structural change is non-negotiable.
If you have the Time-lapse recording enabled, you can replay it from Actions > Video > Time-lapse Replay and screenshot a frame from before the mistake. It's a useful safety net, though not a replacement for versioned duplicates.
Method 2: New portrait canvas, then copy and rotate
Use this when the art itself needs to turn 90°, such as a horizontal illustration you want to present vertically, or when you want a clean file with fresh settings.
- Create a new canvas from the Gallery (+) and choose Custom Canvas.
- Enter portrait dimensions, with width smaller than height. For vertical video assets, 1080 × 1920 px is a common 9:16 target, though you may want to work larger for room to reframe.
- Return to your original artwork and tap Actions > Add > Copy Canvas.
- Open the new canvas and tap Actions > Add > Paste.
- With the Transform tool active, rotate the pasted layer by 90°. Turn on Snapping or Magnetics so the rotation locks to clean angles instead of landing on 89.7°.
- Scale and position as needed, then confirm.
Copy Canvas flattens everything into one pasted layer. If you need to keep layers separate, select layers in the original, group them, and rotate the group in place with Transform before resizing the canvas. Group transforms apply to all layers inside, so you can rotate the whole stack in one move and then run Crop & Resize to reframe.
Method 3: Rotate layers first, then resize the canvas
This hybrid keeps layers intact and avoids the flatten step.
- Duplicate the artwork.
- Group all your layers.
- Select the group, open Transform, and rotate 90° using snapping.
- Open Crop & Resize and swap the canvas dimensions so they match the rotated artwork.
- Nudge the group into position.
The order matters. If you resize before rotating, you may push parts of the artwork past the edges and clip them before you've had a chance to fix them. Rotate first while the canvas is still large enough to contain everything, then crop.
Setting up portrait correctly from the start
If you know a piece is going into a vertical format, avoid the whole problem by creating the canvas at the right size.
- Vertical video (9:16): 1080 × 1920 px for HD, or a multiple of that for headroom.
- Social feed portrait (4:5): 1080 × 1350 px.
- Print portrait: set dimensions in inches or millimeters and the DPI you need, so width is smaller than height.
For animation assets, think about overscan. If the layers will be pushed around in After Effects, such as slow pans, parallax moves, or scale animation, draw 10–20% beyond the frame so you don't run out of pixels mid-move. Procreate limits the number of layers according to canvas size and available memory, so larger canvases give you fewer layers. Plan the canvas size against your layer needs.
Getting portrait artwork into a motion pipeline
Once the canvas is portrait, the handoff to motion work is straightforward.
- Export as PSD to keep layers. Procreate's PSD export preserves layer structure, which After Effects can import as a composition with layers or as a merged footage item.
- Match the composition in After Effects to the same aspect ratio, for example 1080 × 1920 at your project's frame rate, then bring the PSD in at its native size to avoid unwanted scaling.
- Check color: Procreate documents default to a color profile you choose when creating the canvas. Make sure it's consistent with your After Effects project's color management before comparing the two side by side.
- Name your layers before export. Layer names carry through to After Effects and save a lot of cleanup on rigs with dozens of parts.
- Export a flat PNG or TIFF for any frame that will be used as a still reference, a style frame, or a keyframe in another tool.
Where Styleframe fits after the orientation fix
Procreate is where many artists draw the key poses and style frames. Styleframe is an AI video and motion tool built for professional artistic control, and it picks up from there. You can use finished portrait frames as keyframes in Frames-to-Video, so the motion between your drawn poses is generated rather than hand-inbetweened. Every generation is driven by reference images, video clips, and keyframes, not a text prompt alone.
A few features are practical for illustrators working from Procreate files:
- Restyle and Ink-and-Paint apply reference-driven style transfer, so a hand-drawn look from your Procreate frame can carry across a clip.
- Remove Background helps isolate a character or object from a drawn or generated frame before compositing.
- 2D-to-3D and Turntable turn a flat design into something you can view from other angles.
- 4K Upscale brings finished output to production-ready resolution.
Iteration is non-destructive, so you can try a different keyframe or reference without losing earlier results. Output exports as image sequences, which drop straight into After Effects or Nuke, so your compositing, color, and finishing stay where they are. Because Styleframe is reference-driven, it's worth preparing your portrait frames at the final aspect ratio before you bring them in, so you aren't reframing generated results afterward.
Common mistakes to avoid
- Resizing the only copy. Duplicate in the Gallery first, every time.
- Leaving Resample Canvas on. It stretches your drawing instead of changing the frame.
- Confusing view rotation with document rotation. If the dimensions are already right, just twist the view back.
- Rotating by eye. Use Snapping or Magnetics to land on exact 90° turns. Off-angle rotation introduces resampling softness, which is more obvious once the art is scaled in a comp.
- Resizing before rotating. Rotate content while the canvas is still large, then crop.
- Forgetting overscan. If the piece will be animated, extra pixels at the edges give you room to move.
Quick reference
Treat the switch as a small production task rather than a setting: duplicate, rotate or resize in the right order, check what got clipped, and then export in a format your motion pipeline can use. Done that way, going from landscape to portrait costs a few minutes and nothing you can't recover.