How to Swirl Colors in Procreate
StyleFrame Team7 min read
To swirl colors in Procreate, fill a layer with several blended colors, then open Adjustments (the magic wand icon) > Liquify and drag with the Twirl Left, Twirl Right, or Push mode. Use a large brush size, high pressure, and low Distortion for smooth, liquid curves. Use Reconstruct or the Adjust slider to pull back areas that went too far. A Gaussian Blur applied before Liquify gives the swirl soft, marbled transitions instead of hard-edged streaks.
What You Need Before You Start
Swirling in Procreate is a pixel-warping job. Liquify pushes and rotates the pixels that already exist on a layer, so the result depends heavily on the color information you give it. A layer with only two flat colors will produce a thin, boring swirl. A layer with four or five overlapping hues produces the rich, marbled look most people are after.
Set up the following:
- A canvas large enough for your final use. If this will become a background or texture in a video project, start at or above your delivery resolution, such as 3840×2160 for UHD.
- One layer that holds all your color. Liquify affects only the active layer, so merge color work first.
- A brush with no texture or pattern. Flat, round, or airbrush-style brushes behave predictably.
Note that Liquify is unavailable while you are 3D painting, so use a standard 2D canvas.
Step-by-Step: A Classic Liquid Swirl
1. Fill a base color
Create a new canvas and fill the background layer with a mid-tone. Drag a swatch from the color picker onto the layer to fill it. Choosing a mid-value base keeps the final blend from looking washed out or muddy.
2. Scribble in your colors
Pick a round brush at a modest size and lay down loose strokes in two to four additional colors. Neatness doesn't matter, because the next step destroys the edges. What does matter is coverage. Leave no bare white patches, because gaps of untouched paper will pull through the swirl as pale streaks.
If you want a more controlled palette, pick colors from a reference frame or a brand palette now. It's much harder to correct color after the swirl has mixed everything together.
3. Blur the strokes together
Open Adjustments, choose Gaussian Blur, and apply it to the layer. Drag your finger or Pencil to the right to increase the amount. You want the scribbles to melt into soft color fields while still being distinguishable. Over-blurring flattens everything toward gray-brown, while under-blurring leaves ragged brush marks inside the swirl.
4. Open Liquify and choose your mode
Tap Adjustments again and select Liquify. Procreate gives you six distortion modes, plus Reconstruct:
- Push drags pixels along the path of your stroke, like a heavy smudge.
- Twirl (left or right) rotates pixels around your touch point.
- Pinch pulls surrounding pixels toward the stroke.
- Expand pushes pixels outward for a bulging effect.
- Crystals pushes pixels outward unevenly, giving sharp shard-like shapes.
- Edge pulls pixels toward a line, creating a fold.
- Reconstruct restores the original artwork under your Liquify changes.
For a liquid look, begin with Push at a medium-large size.
5. Dial in the sliders
A solid starting point for smooth marbling:
- Size: around half the slider, so each gesture affects a broad area.
- Pressure: at or near maximum. With a finger, Liquify always applies the full pressure setting. With an Apple Pencil, pressure varies the strength.
- Distortion: at or near zero. Higher values add chaotic, jagged, twisted detail, which is great for turbulence but wrong for glassy fluid.
- Momentum: low, around 20 percent. This lets each stroke continue slightly after you lift, which makes curves feel organic.
6. Draw the swirls
Drag small circles and S-curves across the canvas. Overlap them, change direction, and vary the stroke length. For tighter vortices, switch to Twirl Left or Twirl Right and hold or drag slowly over a single area. Alternating between the two Twirl directions in adjacent areas produces the interlocking, flowing look of marbled paper.
If you use an Apple Pencil Pro, the barrel roll gesture can control Twirl strength and direction as you rotate the pencil, which is useful for fine, gradual curls.
7. Rescue overworked areas
Two tools help when a region has been pushed too far:
- Reconstruct paints the original layer back in, so you can undo a single zone without touching the rest of your swirls.
- Adjust reveals an Amount slider that reduces the overall strength of everything you've applied. Drag left to relax the distortion.
Reset clears all Liquify changes while keeping you inside the tool. When the swirl looks right, tap the Adjustments icon to commit.
8. Push the color
Liquify often softens contrast. Afterward, try:
- Hue, Saturation, Brightness: raise saturation a little for more vibrance.
- Curves: adjust individual red, green, and blue channels to bring out a color that got buried, or to shift the overall mood.
Variations Worth Trying
Radial swirl vortex
For a symmetrical spiral, set up a Radial Symmetry drawing guide from the Canvas menu's Edit Drawing Guide option, and enable Rotational Symmetry and Assisted Drawing. Then use Twirl in Liquify with Size and Pressure at maximum, dragging slowly along the canvas edge in a curve. The symmetry mirrors your motion, so the image collapses into a centered whirl. Switching to Reconstruct and stroking from the center outward restores the image in a flowing, unwinding motion, which makes for interesting screen-recorded footage.
Paint-pour look
Draw bold, high-contrast swirly lines with a large flat brush, avoid any white gaps, and skip the blur. Use Twirl, then Push, Expand, and Pinch to smooth and shape the result. The crisp color boundaries give you a poured-acrylic feel instead of a soft gradient.
Mixed-media texture
Run Liquify on a layer that contains a photo, gradient, or scanned paint texture. The warp carries real-world grain through the swirl, which helps the result feel less synthetic once it hits a video timeline.
Troubleshooting Common Problems
The swirl looks muddy. Too many complementary colors blended together average to brown or gray. Limit your palette, or keep your hues analogous, and boost saturation after Liquify.
Visible banding in gradients. Soft blurs can show steps once they're graded in video. Add a light grain or noise layer in Procreate, or add noise in your compositor.
Edges look pixelated. Small canvases can degrade quickly when warped. Work at final resolution or larger.
White streaks appear. You left gaps in the base color layer. Undo, fill them, and redo the swirl.
Taking a Procreate Swirl Into a Motion Pipeline
A static swirl becomes much more useful once it moves. Export from Procreate at full resolution, then use it in your tool of choice:
- Compositing apps such as After Effects or Nuke: use the swirl as a background plate, a displacement or luma map, or a color reference.
- 3D apps such as Cinema 4D or Blender: apply it as a color or emission texture, or as a bump or displacement input. Slowly animating texture coordinates can produce lava-lamp style motion.
- Editing apps such as Premiere Pro: drop it in as a still with slow scale and position keyframes for quick motion backgrounds.
You can also screen-record the Liquify process itself, since the live warping is often more visually interesting than the final still.
Where Styleframe Fits
Procreate gives you a hand-painted swirl, but as a still image. If you want to take it further into motion, you can bring your swirl frames into a motion tool such as Styleframe and keep your existing compositing workflow for the rest.
Quick Reference
Final Tips
Build the palette deliberately, blur before you warp, and keep Distortion low unless you want chaos. Save your layer before you commit Liquify so you can return to the unwarped version. A few variations of the same swirl, exported at full resolution, give you plenty of material for backgrounds, displacement maps, and motion tests downstream.