How to Star Brushes in Procreate
StyleFrame Team8 min read
To make a star brush in Procreate, draw a black star on a square canvas, copy it, and paste it as the Shape source in a new brush in Brush Studio. Then set Spacing to about 25%, Jitter to about 75%, Shape Scatter to about 17%, and turn on Apple Pencil pressure for size. The result is a scatter brush that drops stars of varying size and brightness with each stroke. It uses only Procreate's built-in tools, so no purchased brushes are needed.
What You Need Before You Start
- An iPad with Procreate and, ideally, an Apple Pencil. The pressure-sensitive size settings below need a pressure-capable stylus.
- A square canvas. Procreate's default square preset works. A square canvas is the standard starting point for a brush shape source.
- A black star on a white background. The contrast matters more than the exact artwork.
If you're a motion designer who mostly lives in After Effects, you end up with a reusable brush for sparkle plates, night skies, glints, and texture overlays.
Step 1: Draw the Star Shape
Create a new square canvas and set your color to pure black. The quickest way is to drag the color disc's value slider all the way down. Pick a clean brush such as Monoline from the Calligraphy set.
Option A: Draw it freehand
Sketch a rough five-point star and fill it by dragging the color swatch into the shape (ColorDrop). It doesn't need to be perfect. Slight irregularity makes a scatter brush look more organic, because every stamp shares the same imperfections but lands at a different rotation and size.
Option B: Trace the star emoji
If freehand stars aren't working, use the emoji as a template:
- Open Actions and choose Add > Add Text.
- Open the keyboard's emoji panel and insert the star emoji.
- Scale it up with Uniform turned on so it keeps its proportions, and roughly center it.
- Add a new layer. Select the Selection tool, choose Freehand, and tap point to point around the star's outline. Tapping dot to dot gives you straight edges between points, which is what a crisp star needs.
- Close the selection and use Color Fill to fill it with black.
- Delete the emoji layer.
You now have a clean black star. If you want the brush to produce stars of different sizes in a single stamp, you can duplicate the layer several times, shrink and rotate each copy, and scatter them across the canvas. Do this only if you want a cluster-style shape source rather than a single-star one.
Step 2: Send the Shape to Brush Studio
- Make sure the canvas has a white background and a black star.
- Tap the Actions (wrench) icon, then choose Copy Canvas.
- Open the Brush Library and decide which set the new brush will live in. A dedicated "My Brushes" set is easier to manage than adding to a default set.
- Tap the plus sign to open Brush Studio and create a new brush.
- Under Shape, tap Edit, then Import, then Paste.
- Invert the preview with a two-finger tap so the shape appears as a white star on a black background.
- Tap Done.
If your stamp doesn't look like a star, check the inversion first whenever a custom shape misbehaves.
Step 3: Configure the Brush Settings
These values produce a pressure-sensitive scatter brush with stars of mixed size and brightness. Treat them as a starting point and adjust to taste.
Stroke Path
- Spacing: around 25%. This controls how far apart the stamps land along the stroke. Higher spacing gives a sparser, more constellation-like result.
- Jitter: around 75%. This scatters stamps away from the stroke line, so a single drag produces a wide field of stars rather than a line of them.
Stabilization
- Streamline: push it to the maximum. This smooths the stroke path, which stops the scatter from looking jittery when your hand wobbles.
Taper
Leave Taper at its defaults. A scatter brush doesn't need tapered ends.
Shape
- Scatter: about 17%, in the Shape properties. This varies the stamps so the stars aren't all pointing the same way.
- Flip X: turn it on. Along with scatter, this reduces visible repetition.
Dynamics
- Jitter Size: set to maximum. This is what gives you some big stars and some tiny ones in the same stroke.
- Opacity jitter: about 50%. This creates faint and bright stars together, which reads as depth.
Apple Pencil
- Pressure Size: set to maximum, so pressing harder makes larger stars.
- Pressure Opacity: reduce to zero, so pressure changes size without also dimming the stars. Otherwise, light touches make the stars both smaller and nearly invisible.
You can leave Grain, Rendering, Wet Mix, and Color Dynamics at their defaults for this brush. Finally, tap About this brush, rename it to something findable like "Star Scatter," and tap Done.
Step 4: Test and Refine
Open a new canvas with a dark background, pick white, and paint a few strokes. Drag the brush size slider down until the stars are small, then check these points:
- Too uniform? Increase Shape Scatter or Jitter Size.
- Too crowded? Raise Spacing or lower stroke Jitter.
- Stars look like a stripe along the stroke? Increase stroke Jitter.
- Edges look soft or blurry? Check that your source star was crisp and high-contrast. If you pasted a low-resolution shape, rebuild it on a larger canvas.
- Stars show in the wrong color? Brush color comes from your active color, not the shape source. Paint in white or a pale yellow for night skies.
Test at the actual size you'll use in production. A brush that looks right at 200 pixels may look different when painting a 4K plate.
Variations Worth Building
Once the base brush works, duplicate it and tweak:
- Single-size stars: Turn Jitter Size to zero and lower stroke Jitter. This is good for uniform patterns or stylized backgrounds.
- Mixed-size stars: Use the multi-star shape source from the duplication method above, so each stamp contains several stars at once.
- Pen-style star line: Reduce Spacing and Jitter so stars chain along your stroke like a beaded line. This works for trails, borders, and wands.
- Glint brush: Replace the five-point star with a four-point sparkle shape for lens-flare-style highlights.
Use a Free Brush Set Instead
If you only need the result, plenty of artists share star and sky brush sets on community resource boards such as Procreate Folio. One set there, the Bright Sky brushset by art by ma, includes 50 star brushes in three styles (single size, multiple sizes, and pen style) along with constellations, fireworks, galaxies, and clouds. The free download is a trial version with a smaller selection of brushes. Check the license and make sure you're downloading the free version rather than a paid listing. Even if you use a premade set, building one brush yourself teaches you which settings control what, which helps when you need to adjust something for a specific shot.
Getting Procreate Stars Into a Motion Pipeline
Star brushes are most useful to motion artists when the painted result becomes a layer in a comp. A few practical notes:
- Paint on a transparent background with white or light stars, then export as PNG so the alpha channel survives. Dark canvases are fine for testing but not for export.
- Work at the final resolution. Procreate's maximum canvas size varies by device, so plan layers accordingly. If you need larger output, paint at the largest practical size and upscale later.
- Paint several variations (dense, sparse, large, small) as separate layers or files. You can then offset, scale, and animate them in After Effects for twinkling or parallax.
- Use blend modes in the comp. Stars on a transparent layer typically sit well in Screen or Add modes over a graded background.
- Animate with simple tools. Opacity wiggles, a Turbulent Displace, or a gentle position drift on separate star layers will give you life without re-painting.
Where Styleframe Fits
A painted star field is often the starting point for a styleframe, not the final shot. Styleframe (styleframe.ai) is one option for taking that Procreate artwork further, and you can keep your compositing workflow as it is. Check the tool's site for its current features and export options.
Common Mistakes to Avoid
- Skipping the invert step. A shape that isn't inverted can leave you with a broken custom brush.
- Using a gray or anti-aliased shape with low contrast. Muddy shape sources produce muddy stamps.
- Maxing every jitter value. Too much randomness looks like noise, not stars. Back off until the field feels intentional.
- Forgetting to rename the brush. An unnamed "Untitled Brush" is easy to lose in a big library.
- Exporting a flattened dark canvas when you need an alpha channel for compositing.
Quick Recap
- Draw or trace a black star on a white square canvas.
- Copy the canvas and paste it as the Shape source in a new brush, then invert it.
- Set Spacing around 25%, Jitter around 75%, Streamline to max, Shape Scatter around 17%, and Flip X on.
- Set Jitter Size to max, Opacity jitter around 50%, Pressure Size to max, and Pressure Opacity to zero.
- Rename, test on a dark canvas, and tweak until the star field feels natural.
Once the brush is saved, you can reuse it across every project, then export transparent PNGs into After Effects or push the artwork through Styleframe when a still needs to become motion.