How to Split Draw on Procreate
StyleFrame Team8 min read
To split-draw in Procreate, turn on Drawing Guide under Actions → Canvas, tap Edit Drawing Guide, choose Symmetry, and pick Vertical, Horizontal, Quadrant, or Radial. Then tap Done and paint on a layer with Drawing Assist enabled. Anything you draw on one side of the guide is reproduced in real time on the other side or sides.
Procreate has no feature literally called "split draw." Searchers usually mean mirrored or divided-canvas drawing, which Procreate handles with its Symmetry guide. The rest of this article covers setup, the four symmetry types, the settings that most often cause problems, and how to carry the result into a motion pipeline.
What "split draw" means in Procreate
Symmetry guides divide your canvas into regions with thin overlay lines. A stroke made in one region is duplicated across the others as you draw, so you only paint one half, quarter, or slice.
For motion designers and animators, this is useful for:
- Symmetrical logo marks, emblems, and badges that will be animated later
- Mandalas, snowflakes, and radial patterns for backgrounds and transitions
- Character faces, masks, creatures, and vehicles that need balanced silhouettes
- Texture and shape elements you plan to bring into After Effects, Cinema 4D, or Blender
How to turn on Symmetry in Procreate (step by step)
The exact menu path differs slightly between Procreate on iPad and Procreate Pocket on iPhone, but the logic is identical.
On iPad
- Open your canvas and tap Actions (the wrench icon).
- Go to Canvas and switch on Drawing Guide.
- Tap Edit Drawing Guide to open the Drawing Guides screen.
- Tap Symmetry at the bottom of the screen. The Vertical guide appears by default.
- Adjust position, rotation, and appearance (covered below), then tap Done.
On iPhone (Procreate Pocket)
- Expand the top toolbar with the ellipsis, then go to Actions → Canvas and tap Symmetry.
- Tap Edit Drawing Guides. The interface is condensed at the bottom of the screen; drag the grey handle upward to expand it and reveal more settings.
- Position and rotate the guide, choose your symmetry type, and tap the blue tick to commit.
Tap Cancel at any point to leave the guide editor without changing anything.
Choose the right symmetry type
Procreate offers four types. Pick based on how many times you want your strokes repeated.
Vertical symmetry
A guideline runs down the middle of the canvas. Draw on the left and it appears on the right, and vice versa. This is the default and the best choice for faces, characters, and front-view hard-surface designs.
Horizontal symmetry
A guideline runs across the canvas. Strokes on the top half are reproduced on the bottom half. It works well for reflections, such as an object above a water line, though drawing something like a heart is awkward unless you rotate the canvas or your hand position to suit the axis.
Quadrant symmetry
Vertical and horizontal guides combine, dividing the canvas into four quadrants. A stroke in one quadrant is reproduced in all the others. This suits logo lockups, tile patterns, and four-way ornaments.
Radial symmetry
The canvas is split into eight segments using horizontal, vertical, and diagonal guidelines. Draw in a single slice, like a pizza wedge, and it repeats across the rest. Use it for mandalas, snowflakes, and kaleidoscopic motifs.
The number of radial segments is fixed. Some users in Procreate's own community forum have asked for an adjustable line count so they could build 3- or 5-fold designs, but as documented, you get the four preset types. If you need an odd number of divisions, plan a workaround, such as drawing one wedge and duplicating and rotating it on separate layers.
Move and rotate the guide
You aren't locked to a centered guide. Two nodes control placement:
- Blue Positional node: moves the whole grid across the canvas.
- Green Rotational node: rotates the guide lines.
Rotating a vertical guide gives you mirrored results at an angle, which is handy for diagonal compositions. To return to the default placement, tap either node and choose Reset.
Because a rotated horizontal guide can behave like a vertical one, and vice versa, the type matters less than the guide's angle. If a particular layout feels awkward, try rotating the guide rather than switching types.
Mirror vs. rotational symmetry
By default, new guides use Mirror Symmetry, which reflects and flips strokes across the line. Like a reflection in a mirror, the copy is a reversed version of your stroke.
Turn on Rotational Symmetry and the reproduction is reflected and rotated, effectively flipped horizontally and vertically at once. The result is a pinwheel-like repeat instead of a mirror image. The quickest way to understand the difference is to toggle it and draw a few asymmetrical strokes.
This is a useful switch for pattern work. Mirror gives bilateral balance, as in a face or an insect. Rotational gives a spinning, turbine-like feel.
Make sure Drawing Assist is on for your layer
The most common reason symmetry "doesn't work" is Drawing Assist. Symmetry only applies to paint, smudge, and erase strokes on layers where Drawing Assist is active.
- A layer with Drawing Assist enabled is labeled Assisted in the Layers panel.
- To toggle it, tap the layer and select Drawing Assist.
- If you create a new layer and your strokes aren't mirrored, check whether that layer is marked Assisted.
- The reverse also happens: if strokes are mirrored when you didn't expect them to be, the layer may still have Drawing Assist enabled even though the guide is hidden.
In symmetry mode, the Drawing Assist setting inside the guide editor is on by default. Layers are the part people forget.
Working with assist on specific layers is a real production advantage. You can keep a symmetrical base shape on an Assisted layer and add hand-drawn asymmetrical details, such as scars, wear, or stylized imperfections, on a normal layer above it. That way the final art doesn't look mechanically mirrored.
Adjust the guide's appearance
The guide lines are overlays, not artwork, but you can still tune them so they don't distract:
- Color: change the hue with the bar at the top of the Drawing Guides screen.
- Opacity: from invisible to fully opaque.
- Thickness: from invisible to noticeable.
If you're working on a dark or highly saturated palette, change the guide color so you can see where the axis sits.
Troubleshooting common problems
- Guide is visible but strokes aren't mirrored: check Drawing Assist on the active layer and in the guide settings.
- Strokes are mirrored but the guide is off: Drawing Assist is probably still on for that layer. Toggle it off.
- Mirrored half looks offset: the guide isn't centered. Open Edit Drawing Guide, tap a node, and choose Reset.
- Wrong repeat type: open the guide editor and check which Symmetry type is selected. On iPhone, the current type is shown after "Symmetry:" in the settings readout.
- Edges don't match when brushes use texture: symmetrical strokes repeat the brush behavior, but grain or texture may still reveal the mirroring. Use cleaner brushes for the symmetrical base and add texture on separate layers.
Preparing symmetrical art for After Effects or other tools
If the drawing is destined for motion work, set up your Procreate file for a clean handoff:
- Keep the symmetrical base, secondary details, and color fills on separate layers so you can animate them independently.
- Work at a canvas size that matches or exceeds your target comp resolution, since scaling raster art up in a comp softens it.
- Name layers before export. A tidy hierarchy saves time when you rebuild the stack in After Effects, Blender, or Nuke.
- Split elements you plan to rotate or scale, such as radial petals and logo pieces, so they have clean edges and transparent backgrounds.
Symmetry is a drawing aid, not an animation tool. Procreate gives you the artwork; you still need your compositing or 3D app to move it.
Where Styleframe fits after the drawing is done
Once you have a symmetrical design, the next question is usually how to turn it into moving footage without losing artistic control. is an AI video and motion tool built for that kind of controlled, reference-driven work, not for one-click generation.
A few of its tools are relevant to illustrated source art:
- Frames-to-Video is keyframe-driven, so you define the frames and the tool generates motion between them. A Procreate drawing can serve as a start or end frame.
- Restyle and Ink-and-Paint apply a reference-driven style to footage or frames, so a look you established in Procreate can carry across a shot.
- 2D-to-3D and Turntable help when a symmetrical character or object needs to be seen from more than one angle.
- Remove Background and 4K Upscale handle cleanup and resolution for production-ready output.
Every generation is driven by reference images, video clips, and keyframes, and iteration is non-destructive, so you can try variations without overwriting earlier work. Output is production-ready 4K, and Styleframe exports image sequences, so the results drop into an After Effects or Nuke comp the way any other plate would. An After Effects plugin is on the way. Your compositing workflow stays intact; Styleframe is a step before it, not a replacement for it.
Quick reference
Final tips
Start with Vertical symmetry for most character and logo work, and move to Radial only when the design truly needs repeated slices. Keep symmetrical and asymmetrical elements on separate layers so you can break the perfection where it helps the design. And when the drawing is meant to move, organize the layers for export before you start painting. Cleaning up a flattened symmetrical drawing later costs far more time than planning the layer structure up front.