How to Slice in Procreate
StyleFrame Team8 min read
Procreate has no dedicated slice tool. You slice by making a selection with the Selection tool (the "S" icon), swiping three fingers down on the canvas, and choosing Cut & Paste, which moves the selected piece onto its own new layer. Repeat for each piece, then use the Transform tool to move or rotate the slices without touching the rest of the artwork. For motion work, keep each slice on its own layer when you export so it can be animated independently.
What "Slicing" Means in Procreate
Procreate doesn't have a dedicated Slice tool. Slicing here means splitting one flat piece of artwork (a character, a photo, a texture, a piece of type) into separate layers you can move, warp, or animate independently.
You can do this in three ways:
- Cut or copy a selection to a new layer. This is the core method and the one you'll use most.
- Crop & Resize the canvas. This isolates a rectangular region of the whole document, not individual pieces.
- Select, invert, and clear. This removes everything outside a region, which is useful for cut-outs and rough background removal.
For motion designers, the first method is the important one. It turns a single illustration into a set of rig-ready parts.
How to Slice Artwork Step by Step
1. Pick the layer you want to slice
Selections act on the active layer. Before you start, tap the layer in the Layers panel. If your artwork is spread across several layers, merge them first or duplicate the layer, so you never slice into your only copy. Duplicating before you cut is a habit worth keeping: if a cut goes wrong, you still have the original.
2. Choose a selection mode
Tap the Selection tool in the top bar. At the bottom you'll see four modes:
- Freehand: draw a loop around the area. Best for organic shapes such as limbs, hair, or irregular props.
- Rectangle: best for UI panels, tiles, and straight-edged elements.
- Ellipse: best for circles, eyes, wheels, and rounded elements.
- Automatic: tap an area of similar color to select it. Best for flat-color artwork, since it selects by color similarity rather than by shape.
Use Add and Remove to build up or trim a selection. For example, you can start with a rectangle, then switch to Remove and carve out a notch with Freehand.
3. Refine the edge
If the edge of your cut will be visible, soften or tighten it before you commit:
- Feather blurs the selection edge, which helps when you're blending pieces back together.
- Invert flips the selection so you can act on everything outside your shape.
- Save & Load lets you store a selection and recall it later, so you can reuse the same cut.
For hard-edged vector-style art, keep feathering at zero. For photographic or painterly material, a small amount of feather usually reduces the harsh "scissor" look.
4. Cut the slice to its own layer
With the selection active, swipe down with three fingers anywhere on the canvas to open the Cut / Copy / Paste menu. Your options differ in what they leave behind:
- Cut & Paste removes the selected pixels from the source layer and places them on a new layer in the same position. This is the right choice for true slicing.
- Copy & Paste leaves the original intact and duplicates the selection onto a new layer. Use this when you want a safety net or need overlapping pieces.
- Cut removes the pixels and holds them in memory. You can paste them later, and they land on a new layer.
You can also reach these commands from Actions → Add, which is useful when you're wearing a smudge guard glove and the three-finger gesture is awkward. The gesture works with any three fingers touching the screen, including a mix from both hands.
5. Repeat for each piece
Go back to the source layer, make the next selection, and cut again. Name each new layer as you go. Naming matters later, when you're staring at forty layers named "Layer 17."
6. Move, rotate, and distort the slices
Tap the Transform tool (the arrow icon) with a slice layer active. A few practical notes:
- Drag the green rotation handle to rotate. To move without resizing, place your finger or pencil outside the shape and drag.
- Uniform scales proportionally, Freeform scales on each axis independently, Distort changes perspective, and Warp bends the piece with a mesh.
- Snapping and Magnetics help alignment, but you may find them intrusive when you're nudging pieces into a tight fit. Turn them off if so.
- Set the interpolation to Bicubic (in the Transform settings) to keep resampled pieces from looking jagged or blocky when you scale or rotate them.
For smoother pushes and pulls on a single piece, Liquify (under the Adjustments magic wand icon) offers a Push mode.
Slicing Out Backgrounds
Procreate doesn't have a one-tap background remover, but the same selection logic gets you most of the way:
- Use Ellipse, Rectangle, or Freehand to trace around the subject.
- Tap Invert so the background is selected instead.
- Scrub three fingers left and right across the canvas to clear the selected area.
For flat backgrounds, Automatic selection is faster. Tap the background, drag to adjust the threshold, then clear. If you only need a quick cut-out of a subject from a photo, you can also use the iPad's native touch-and-hold subject lift in the Photos app and drag the result into Procreate using Slide Over. It's fast, though you should still inspect and clean the edges with the eraser.
Preparing Sliced Artwork for After Effects
If you're slicing in Procreate to animate elsewhere, a few habits save time later.
Work at final resolution. Scaling pixels up in After Effects softens them. Set your Procreate canvas large enough for the biggest scale your animation will ever need.
Leave overlap where joints will rotate. When you slice an arm from a torso, extend the arm's shape a little beyond the cut line (paint the hidden portion before slicing, or use Copy & Paste so the source stays whole). Without that overlap, rotating the piece reveals a gap.
Keep pieces on separate layers, not merged. Export your artwork with the layers kept separate, and check your import settings in After Effects so each slice arrives as its own layer, ready for parenting, puppet pins, or rigging.
Use PNG for single assets. If you only need one isolated element with transparency, save it as a PNG.
Check color profile. Procreate's canvas color profile can differ from your After Effects project. Confirm both are set sensibly so your slices don't shift color on import.
Common Problems and Fixes
The selection distorts when I move it. You're probably dragging a transform handle. Move from outside the shape, or use the Transform arrow with Uniform mode.
Edges look jagged or fringed. Switch interpolation to Bicubic, add a little Feather before cutting, and clean up the edge with the eraser on the new layer.
The three-finger swipe doesn't trigger. Make sure gestures are enabled in Procreate's settings, and that you actually have a selection active for Cut and Copy. Tap-and-hold used to open this menu in older versions, but it was removed because it triggered accidentally during selection and transform edits.
I cut the wrong thing and the original is gone. Undo your last action. Next time, duplicate the source layer first.
The slices don't line up when I reassemble them. Cut with Copy & Paste instead, or save your selection with Save & Load so you can reselect the same shape later.
Where Styleframe Fits After You Slice
Slicing in Procreate gets your artwork into clean, separate parts. It doesn't generate in-between motion, change the visual style of a whole sequence, or give you depth from a flat drawing. That's where can sit beside your existing workflow, as a tool for artists who want control, not a one-click black box.
Styleframe is an AI video and motion tool built around reference images, video clips, and keyframes. After you've sliced and composed a piece in Procreate, you can use it to:
- Frames-to-Video: set start and end keyframes from your own artwork and generate the motion between them.
- Restyle and Ink-and-Paint: apply a reference-driven style transfer so a sequence follows the look of your drawings.
- 2D-to-3D and Turntable: turn a flat character or prop into something you can view from other angles.
- Remove Background: isolate subjects when a hand-cut selection would take too long.
- 4K Upscale: bring output to production-ready resolution.
It isn't a replacement for careful slicing and rigging; it's a way to extend what your sliced artwork can do when hand-animating every frame isn't practical.
Quick Reference
Final Thoughts
Slicing in Procreate is really selection, cut, and new-layer discipline. Pick the right selection mode, refine the edge, use Cut & Paste for true splits, name your layers, and export with your layers kept separate. Do that consistently and your Procreate artwork arrives in After Effects already organized for animation.