How to Sketch Over a Photo in Procreate
StyleFrame Team8 min read
To sketch over a photo in Procreate, tap the Actions wrench, choose Add > Insert a Photo, fit it to the canvas, and lower that layer's opacity. Then create a new layer above it and draw on that layer with a brush like Studio Pen. Choose Insert a Private Photo if you don't want the reference to appear in your time-lapse, and hide the photo layer before exporting so only your linework remains.
Quick Steps for Sketching Over a Photo in Procreate
- Create or open a canvas.
- Tap Actions (wrench) > Add > Insert a Photo and pick your image.
- Use the Transform tool to fit and position it, then confirm.
- Reduce the photo layer's opacity so your marks stand out.
- Add a new layer above the photo and sketch on it.
- Hide the photo layer and export.
The rest of this guide covers each step, a few alternatives, and how to carry a sketch into a motion pipeline.
Step 1: Set Up the Canvas and Insert the Photo
Start with a canvas that matches your final use. If the sketch is heading to a video timeline, match the aspect ratio of your composition (16:9 or 9:16, for example) and use dimensions at or above your delivery resolution. Fixing proportions after you've drawn is far more painful than choosing them up front.
Open Actions > Add and you'll see two relevant options:
- Insert a Photo places the image as a normal layer. It will appear in Procreate's time-lapse replay.
- Insert a Private Photo places the image but keeps it out of the exported time-lapse. Use this if you share process videos and don't want the reference visible.
Once the photo lands on the canvas, Procreate drops you into the Transform tool. Choose Fit to Canvas if you want the whole image visible, or drag a corner to scale manually. Uniform keeps proportions locked, while Freeform lets you stretch. Snapping and magnetics can be toggled in the Transform settings if the guides get in your way. Tap the Transform tool again (or the arrow icon) to commit the placement.
Step 2: Lower the Photo Opacity
If you draw directly on a full-strength photograph, your lines will vanish into the detail. Open the Layers panel, tap the N on the photo layer's thumbnail, and drag the opacity slider down. A setting somewhere in the 60 to 70 percent range is a common starting point, but the right value depends on the image. High-contrast photos often need more fading, while soft or dark photos can stay stronger.
Two other options help the same way:
- Desaturate the photo with Adjustments > Hue, Saturation, Brightness. Removing color keeps your attention on shapes and edges.
- Lock the layer in the Layers panel. This prevents accidental marks on the photo.
Step 3: Create a Sketch Layer and Draw
Tap the + in the Layers panel to make a new layer, and confirm it sits above the photo. Draw on this layer only. Keeping your sketch separate from the reference is what makes everything later non-destructive: you can toggle the photo, erase freely, or redraw without touching the source.
For brushes, the Inking set's Studio Pen and Technical Pen are reliable choices for clean tracing. For looser gesture work, try a pencil from the Sketching set. Pick a contrasting color against the photo, such as white over a dark scene or a saturated red or blue over a neutral one.
A few habits that make tracing look like drawing instead of copying:
- Block big shapes first. Rough in the overall silhouette and proportions before any detail.
- Simplify. You don't have to draw every window or tire ring. Decide what matters and leave the rest out.
- Use StreamLine. In the brush settings, increasing StreamLine stabilization smooths shaky strokes.
- Hold for straight lines. Draw a line and keep your pencil on the screen, and Procreate snaps it straight. QuickShape works the same way for other shapes.
- Add refinement layers. Create a second layer for cleaner final linework and lower the opacity of your rough layer beneath it.
Alternative: Use the Reference Window Instead
Sometimes you don't want the photo on the canvas at all. Procreate has a Reference companion for exactly this. Tap Actions > Canvas and toggle on Reference. A floating window appears where you can load an image from your photo library, zoom into it, and move it around the screen while you draw freehand on your main canvas.
This works well when you're studying proportions rather than tracing contours, or pulling color from a photo. One caveat: the reference window counts as a layer, so keep that in mind if you're working under a tight layer limit.
Convert a Photo to Line Art as a Starting Point
Procreate has no auto-trace button, but you can build a rough line-art base with blend modes. This is useful when you want an outline to refine rather than a purely manual trace.
- Insert your photo and duplicate the layer.
- On the duplicate, go to Adjustments > Hue, Saturation, Brightness and drop saturation fully to get black and white.
- Duplicate that desaturated layer.
- On the top copy, use Adjustments > Curves and invert it (flip the default curve so it runs downward).
- Tap the N on that layer and set the blend mode to Color Dodge. It's under the Lighten group. The canvas will turn largely white.
- Apply Adjustments > Gaussian Blur to the inverted layer and adjust until an outline appears.
If you only see a high-contrast black-and-white photo, check the blend mode and the inversion. Make sure the inverted layer is above the desaturated one and that Color Dodge is active. The result is a pencil-like edge map you can lower in opacity and sketch over with cleaner strokes.
Legal and Ethical Notes on Tracing
Tracing a photograph for composition and proportion is a standard practice, but the photo's license still matters. Use your own photography, or sources that allow the use you need, such as stock sites with commercial licenses. Tracing someone else's image and presenting it as original work is a copyright and reputation risk, especially in client or broadcast work. Use references to get proportion and structure right, then make your own decisions about style, color, and composition.
Export the Sketch Cleanly
Before exporting:
- Hide the photo layer (uncheck its visibility box) so it doesn't bake into the output.
- Hide the paper color if you want a transparent background.
- Go to Actions > Share and choose a format.
Useful formats for production work:
- PNG keeps transparency, which is handy for dropping line art over footage.
- PSD preserves layers, so you can open the file in Photoshop or bring the layers into After Effects.
- TIFF or JPEG work for flat reference or approval images.
Taking a Procreate Sketch Into a Motion Pipeline
For motion designers and VFX artists, a sketch over a photo is often just the first step. Typical uses include boarding a shot over a plate, drawing a rough style frame over a location photo, or generating line art that later gets animated or composited.
Once the sketch exists, the question becomes how to turn a still into moving, stylized footage without losing control of the look. This is where fits. It's an AI video and motion tool built around artistic control rather than one-click output. Instead of typing a prompt and hoping, you drive generations with reference images, video clips, and keyframes.
Some practical ways a Procreate sketch can feed into it:
- Frames-to-Video: Use your sketch or a pair of sketches as keyframes, and generate the motion between them. You decide the start and end poses instead of leaving them to chance.
- Restyle and Ink-and-Paint: These reference-driven style transfer tools let you apply the look of your own drawing or painting to footage, so a hand-drawn style frame becomes the target for a whole shot.
- 2D-to-3D and Turntable: If your sketch describes a character or object, you can explore it as a 3D form and rotate it for further reference.
- Remove Background: Clean up isolated elements.
Iteration is non-destructive, so you can try several approaches from the same source sketch without overwriting earlier results.
Troubleshooting Common Problems
Strokes aren't appearing. You're probably drawing on the locked photo layer. Select your new sketch layer instead.
The photo shows up in my time-lapse. Reinsert it using Insert a Private Photo.
The photo is blurry. Low-resolution images stretched past their native size soften quickly. Scale down in the Transform tool or choose a higher-resolution source.
Lines look jittery. Increase the brush's StreamLine setting, or slow your stroke and use fewer, longer lines.
I can't find Color Dodge. Tap the N on the layer, then open the Lighten tab in the blend mode panel.
Final Thoughts
Sketching over a photo in Procreate comes down to a few habits: insert the image, fade it, draw on a separate layer, and hide the reference at export. From there, you can refine the linework, build a line-art base with blend modes, or carry the result into a video pipeline where the sketch becomes a style frame or keyframe. Keeping the photo and the drawing on separate layers makes every later step easier, whether you're polishing an illustration or preparing a look for a full motion sequence.