How to Set Up Lighting in Procreate
StyleFrame Team7 min read
To set up lighting in Procreate, first decide whether you're lighting a 2D painting or a 3D model. For 2D art, add a dark Multiply layer clipped over your artwork, erase the areas where light should land, then paint glow and highlights on Add or Screen layers. For 3D Painting, open Actions → 3D → Edit lighting & environment, where you can place up to four lights and choose from 11 environment presets.
Start With a Lighting Plan
For 2D work, the lighting is whatever you paint. Decide three things before you touch a layer:
- Direction. Where is the key light, and which side of each form faces away from it?
- Color temperature. Warm light such as sunset, fire, or interior bulbs usually pairs with cooler shadows. Cool light such as moonlight or open sky pairs with warmer shadows.
- Contrast. A low-key, dramatic scene needs a dark base and a small, bright pool of light. A daylight scene needs softer, shorter value steps.
Also paint a visible hint of the light source in the background, such as a lantern, window glow, or a warm gradient on one edge. Without it, even a well-built lighting pass reads as an arbitrary overlay.
Method 1: Multiply Layer and Erase
This is the fastest way to turn a flat illustration into a lit scene, and it works best on artwork with a mid-to-dark background.
- Finish your base colors first. Lighting works best on a clean, readable image.
- Create a new layer at the top of the stack and fill it with a dark, saturated color. Deep brown works for warm scenes. Blue or purple suits night or cool light.
- Set the layer's blend mode to Multiply. The whole image darkens, which is the point.
- If you only want the subject affected, turn on Clipping Mask so the layer is confined to the layer below it.
- Pick a soft or hard eraser and erase the Multiply layer where light should fall: across a cheek, along a shoulder, on a lantern-lit patch of ground.
- If the result is too heavy, drop the layer opacity. Around 85% is a reasonable starting point for a dramatic look.
Erase only the Multiply layer and leave your art untouched. If you erase too much, switch the layer back to Normal, eyedrop the fill color, and paint the area back in.
Add the Light Itself
Erasing only removes darkness. To make the light feel real, add color around the erased edge:
- Lock the Multiply layer with Alpha Lock.
- With a soft airbrush, paint a saturated orange (or your key-light hue) just around the edge of the erased area.
- Add a brighter, yellower tone even closer to the edge, and keep it tight. It should hug the shape, not spread like the orange.
- On the opposite side of the subject, add a bluish or purplish tone as a fill or bounce.
- Turn off Alpha Lock and apply Gaussian Blur to the layer, adjusting back and forth until the edges transition without losing the intended contrast. Dramatic lighting can stay fairly hard, so don't over-blur.
Method 2: Separate Shadow and Light Layers
If you want more control than a single Multiply layer allows, split shadows and lights across two clipped layers.
Shadows: Create a layer above your character, turn on Clipping Mask, and set it to Multiply. Choose a light, slightly desaturated purple, which usually produces a more natural shade than gray. Paint where light doesn't reach: under the chin, beneath the hairline, inside the ear, between fingers, and in clothing folds. Lower the opacity once you're done to soften the whole pass.
Lights: Create another clipped layer and set it to Add (or Screen for a gentler lift). Pick a light yellow for warm light and paint highlights only where the light can reach. Lower the opacity until it sits naturally.
For soft light shapes, use the Selection tool to draw an area, apply Feather, then fill it on the Add layer. This gives you a smooth falloff without hand-blending.
A general rule for blend modes: Multiply and the other darkening modes are for shadow and ambient tone. Screen suits light on objects that don't glow. Add is better for emissive things such as fire, lamps, and magic.
Method 3: Lighting That Preserves Texture
Overpainting with flat colors and blend modes can flatten texture, which matters if you work with scanned traditional media or heavily textured brushes. A mask-based approach keeps the original surface intact:
- Name your base layer something clear, such as "Original Art," and optionally duplicate it as "Adjusted Art" for any corrections.
- Add a new layer filled with your shadow color. Set it to Color at roughly 50% opacity. Use a warm shadow color for cool light, and the reverse for warm light. The color's value doesn't matter, because the value comes from the art underneath.
- Make a flattened copy of the whole image using Copy All and Paste, or by grouping, duplicating, and flattening. Name it "Shadows."
- Open Adjustments → Hue, Saturation, Brightness and drag brightness down to around 40%. Lower values give darker shadows.
- Add a Mask to the Shadows layer and fill it with black, so the darkened copy is hidden.
- Paint on the mask with white to reveal shadows exactly where you want them.
Because the shadows are a darkened copy of your actual artwork, the paper grain and brush texture carry through. This method takes more setup, but it's useful when texture is part of the look.
Quick Glow With Bloom
For a fast luminous effect, use Adjustments → Bloom. Bloom picks up the lightest parts of a layer and gives them a glow. Paint white or pale highlights on a separate layer along the lit edges of your subject, apply Bloom, and tweak the size and burn settings. Keep the amount restrained, since too much bloom washes out the form you just lit.
Setting Up Lighting in Procreate's 3D Painting
If you're working with an imported 3D model, Procreate has a dedicated Lighting Studio:
- Open your model in 3D Painting.
- Tap Actions → 3D → Edit lighting & environment. The model sits on a gridded ground plane with two white lights above it.
- Tap Add Light to add more lights, up to a maximum of four. Duplicating a light also counts toward that limit.
- Press and hold a light cube, then drag to reposition it. You'll see the effect on the model as you move it.
- Tap a light to open its settings. Hue shifts the color across the full spectrum, Saturation controls how much color it carries (you need some saturation for hue to show), and Intensity works like a dimmer from black to full brightness.
- Open Environment to choose from 11 indoor and outdoor presets. The environment lights the scene, affects reflections on the model, and can hold your extra lights. You can adjust its exposure or hide the background entirely.
- Tap Done to save.
One caveat: Lighting Studio changes only appear in the 3D view of the Reference companion, so don't expect them to alter your 2D texture painting.
Common Mistakes to Avoid
- Lighting before values are settled. If the underlying art has weak value structure, lighting layers will only mask the problem.
- Using pure black for shadows. Tinted shadows read as richer and more believable.
- Too many light colors. One key hue, one accent, and one cool or warm counter-tone is usually enough.
- Hard-baking too early. Keep lighting on separate, clipped layers until the piece is approved.
- Forgetting the environment. Light that doesn't appear to come from anything in the scene feels pasted on.
Taking Procreate Lighting Into a Motion Pipeline
For motion designers and VFX artists, a lit Procreate piece is often a starting point rather than a final deliverable: a styleframe, a concept, or a texture source. Keep your lighting layers separate and exported as layered files so you can adjust the shadow, glow, and base independently when you bring them into After Effects or Nuke.
This is where fits.
Quick Setup Checklist
- Choose a light direction, color temperature, and contrast level.
- Finish base colors and confirm the value structure.
- Add a clipped Multiply layer and erase where light lands.
- Paint warm and cool color accents with a soft airbrush on top.
- Add highlights on Add or Screen layers, then use Bloom or a feathered selection for glow.
- Soften edges with Gaussian Blur only as far as the look requires.
- For 3D models, use Lighting Studio with up to four lights and an environment preset.
- Export layered files so lighting stays adjustable downstream.