How to Set 300 Dpi in Procreate
StyleFrame Team8 min read
To set 300 DPI in Procreate, open the Gallery, tap the new canvas button, enter your width and height, set DPI to 300, and tap Create. To change an existing piece, go to Actions → Canvas → Crop & Resize → Settings and edit the DPI there. DPI only affects print size, so the pixel dimensions are what actually determine quality. Setting it before you start painting avoids the layer-count and resampling problems that come from changing it later.
What 300 DPI actually does in Procreate
DPI means dots per inch. It describes how many pixels are packed into each inch of a printed image. On a screen, it does nothing. A 3000 × 3000 px canvas is the same grid of pixels at 132 DPI as at 300 DPI. The DPI value only tells a printer or layout app how large to print that grid at 100% scale.
The relationship is simple:
canvas size in inches × DPI = canvas size in pixels
Set any two of those values and the third follows. A 10 × 10 inch canvas at 300 DPI is 3000 × 3000 px. If you create the canvas in inches or millimeters, DPI directly controls how many pixels you get. If you create it in pixels, DPI is just a label for print scale.
That is why people are sometimes confused when they change a 6400 × 4320 px canvas from 300 to 400 DPI and see no visual difference. The pixels are the same, so the image is the same.
How to set 300 DPI on a new canvas
This is the cleanest route, and the one to use if you know the work is going to print.
- Open the Procreate Gallery and tap the new canvas (+) button.
- Choose the custom canvas option instead of a preset. Presets come with their own DPI values, which range from roughly 132 to 400.
- Set your units (inches, millimeters, centimeters, or pixels) and enter the width and height of your final print size.
- Set DPI to 300.
- Check the pixel dimensions Procreate calculates, and the Maximum layers readout, before you tap Create.
- Tap Create.
Do the math before you commit. If you need an A4 print, the canvas should be around 2480 × 3508 px at 300 DPI. If you need a 10-inch square, you should see 3000 × 3000 px. If the pixel numbers look too small for the output you have in mind, increase the physical size or the DPI now, while it costs nothing.
Watch the layer limit
Procreate caps the number of layers based on the canvas's pixel dimensions. A higher DPI at a fixed physical size means more pixels, which means fewer available layers. Always check the maximum layer count on the new canvas screen. If a 300 DPI canvas at your target size leaves too few layers for your process, you have three options:
- Work at a smaller physical size and plan to upscale later.
- Flatten or merge layers as you go.
- Lower the DPI slightly if the print will be viewed from a distance (see below).
How to check the DPI on an existing canvas
To confirm what you have, tap Actions → Canvas → Canvas information → Dimensions. This shows the DPI, the physical width and height, and the pixel width and height. Check it before exporting anything for a printer or client.
How to change DPI on an existing canvas
Procreate can edit DPI after the fact, though it is better to avoid it. Go to Actions → Canvas → Crop & Resize → Settings. What happens next depends on whether Resample Canvas is on.
Resample off: only the print size changes
With resampling off, the pixel dimensions stay fixed and DPI trades off against physical size:
- Raising DPI makes the physical width and height smaller.
- Lowering DPI makes the physical width and height larger.
A 2000 × 2000 px canvas set to 300 DPI prints at about 6.7 inches square. At 132 DPI, the same pixels print at about 15 inches square. Nothing about the image quality changes. You are only changing the print scale. If a publisher asks for 300 DPI and your artwork has enough pixels for the size they want, this is often all you need.
Resample on: pixels are added or removed
With Resample Canvas on, changing the DPI or the physical size changes the pixel count. Procreate has to invent new pixels based on existing ones, so increasing resolution this way is upscaling, and it won't add real detail. It also has a layer cost. In one demonstration, resampling a canvas up to 3000 px wide at 300 DPI dropped the maximum layers from around 300 to 52. Resampling downward does the reverse and can free up layers.
If you are not sure which you want, leave resampling off first and check whether the resulting print size is acceptable.
If the DPI is wrong and the pixels are too few
Sometimes the problem isn't the DPI label. A canvas at 1239 × 1307 px will never print sharply at 10 inches wide. Your options are to rebuild the canvas at the right size and copy layers across, resample up and accept softness, or repaint critical elements at higher resolution. A reasonable rule of thumb: it is better to have more pixels than you need than fewer.
Is 300 DPI always the right target?
No. 300 DPI is the common standard for an A4 sheet or a magazine page, but the right value depends on output size, viewing distance, and material:
- Postcards and small prints, viewed up close: 300–600 DPI.
- Posters viewed at arm's length or farther: often well below 300 DPI is acceptable.
- Billboards: a very low DPI can be enough, since viewers are far away.
- Fabric: the texture limits visible detail, so around 100 DPI may be adequate.
If a printer is involved, ask them for their spec before you build the canvas. They will usually tell you the exact pixel dimensions or DPI they want.
Many artists settle on a simple habit: build the canvas at 300 DPI and generous pixel dimensions, and scale down for anything else. That gives you flexibility without redoing work.
Color and export settings that matter for print
A few other settings affect whether a print looks the way you expect:
- Color profile: Procreate defaults to Display P3 on compatible iPads. For broad compatibility, standard sRGB is a safe choice, and you can convert to the printer's profile at the end if they require something specific.
- Check real size: Use the Actual Size command, which you can assign to a QuickMenu slot, to view the canvas at 100%. Zooming in will always eventually show pixels, so judge quality at actual size, not at 400%.
- File format: PNG is a fine lossless export, but it may not reliably carry print-size information. A PDF is sometimes suggested instead, and your printer can tell you what they want. Avoid routing files through email or the Photos app, which can alter or recompress them.
Why motion and VFX artists should care about DPI
If your work lives in video, compositing, or 3D, DPI is mostly irrelevant. Video work is defined by pixel dimensions, so a 1920 × 1080 or 3840 × 2160 composition is defined by pixels, not inches. A Procreate illustration at 132 DPI and one at 300 DPI with the same pixel size are the same image on screen.
DPI starts to matter at the edges of a motion project:
- Print deliverables: posters, key art, title-card stills, pitch decks, and leave-behinds drawn from a project.
- Storyboards and style frames: boards sketched in Procreate that may be printed for client reviews.
- Texture and matte painting: hand-painted maps for 3D, where the pixel dimensions (2K, 4K, 8K) are the real spec.
For anything headed to video, set the canvas by pixel dimensions that match your delivery resolution and ignore the DPI field. For anything headed to print, set the physical size and 300 DPI first. If a piece has to serve both, build it at the larger of the two pixel requirements.
Using Procreate artwork in an AI-assisted motion pipeline
Some motion designers use Procreate for hand-drawn frames, character designs, and style references. Those can be used as keyframes or style references in AI-assisted tools such as .
In practice, the pixel dimensions of your Procreate export matter more than DPI. Export clean PNGs at a resolution that matches the aspect ratio of your target frame, with the drawing as detailed as you need.
Quick checklist
- Decide the final output first: print or screen.
- For print, build a custom canvas at the physical size, set to 300 DPI.
- Check the pixel dimensions and maximum layers before you create it.
- Verify settings in Actions → Canvas → Canvas information → Dimensions.
- To change DPI later, use Crop & Resize → Settings, and keep Resample Canvas off unless you intend to change pixel dimensions.
- For video and motion work, set pixel dimensions to match your delivery format and treat DPI as a print-only label.
FAQ
Can I change a 132 DPI canvas to 300 DPI? Yes, in Crop & Resize → Settings. With resampling off, the pixels stay the same and the print size shrinks. With resampling on, Procreate generates new pixels, which can soften the image and reduce your available layers.
Does 300 DPI make my digital art sharper on screen? No. On screen, only pixel dimensions affect sharpness.
Why did my layer count drop? More pixels mean fewer available layers. A higher resolution canvas, from a higher DPI at the same physical size or from resampling, reduces the maximum layers available.
What should I ask my printer? Ask for the final physical size, the DPI or pixel dimensions they want, the color profile, and the preferred file format.