How to Separate Lineart from Background Procreate
StyleFrame Team8 min read
To separate lineart from its background in Procreate, import or draw the art, then convert its white to transparency. The quickest method is to set the lineart layer to Multiply, so white drops out visually. For true transparency, you can use a luminance mask: fill a new layer with black, paste the lineart into its mask, and invert it. Export as a PNG with the background color hidden, and the lines land in After Effects, Nuke, or Blender on a real alpha channel.
Which method should you use?
Procreate has no single "extract lines" button, so the right approach depends on what you need downstream.
For motion work, you almost always want real alpha. A Multiply layer only makes white look transparent inside Procreate. The layer itself still contains opaque white paper, so it may not behave as transparent anywhere else.
Prepare the lineart first
Every method works better when the source is clean. Spend a minute here before you separate anything.
- Import the file through Actions > Add > Insert a photo (or Insert a file), or draw directly on the canvas.
- Increase contrast with Adjustments > Curves. Pull the white point so paper tone becomes pure white, and pull the black point so the lines become solid black. Light pencil or gray paper will not separate cleanly until you do this.
- Work at final resolution. Resampling after separation softens edges. If the art will be composited at 4K or larger, set the canvas size for that up front.
- Duplicate the layer and hide the original so you can recover if a step goes wrong.
If you are starting from a photographed or scanned sketch, flatten out uneven lighting before the Curves adjustment. Shadows across the paper will otherwise turn into gray patches in your alpha.
Method 1: Multiply blend mode (fastest)
Multiply multiplies each pixel's value by the pixels underneath. Pure white leaves the colors below unchanged, and pure black stays black.
- Tap the N next to the lineart layer.
- Choose Multiply.
- Create new layers beneath the lineart and paint your colors there.
This is the right choice for illustration and color blocking, where the lineart always sits on top. Its limits matter for production:
- Anything that isn't pure white, such as faint paper texture or off-white scan noise, will tint the colors underneath.
- You can't alpha lock and recolor the lines, because the layer still contains the opaque white paper.
- The transparency exists only inside Procreate's compositing.
If you only need to paint underneath, stop here. If the lines need to travel to another application, keep going.
Method 2: Luminance mask for true transparency
This method turns brightness into alpha. Black lines become opaque, and white paper becomes fully transparent. It is the same logic as a luma matte in After Effects.
- Import your lineart and run the Curves cleanup described above.
- With the lineart layer selected, use the Selection tool (or the layer's Select option) to select the whole layer, then Copy.
- Create a new layer and name it something like "Lines." Fill it with black (drag the black color into the layer using ColorDrop).
- Tap the Lines layer and choose Mask. A mask thumbnail appears.
- Select the mask, then Paste the lineart into it.
- With the mask active, choose Invert from the layer options (or the mask's menu) so the black lines become visible and the white paper becomes hidden.
- Hide the original lineart layer and any background color.
You now have black lines on a transparent background. Because the content layer is solid color, you can also alpha lock it and recolor the lines. This is the useful trick for tinting line weight to blend into highlights.
If you need the mask applied permanently, merge the mask down or flatten the layer with its mask, then check the result against a dark canvas color to look for stray gray pixels.
Method 3: Select the white and delete
For crisp, high-contrast linework, you can remove the paper directly.
- Use the Selection tool in Automatic mode.
- Tap the white area and drag your finger or Pencil to adjust the threshold.
- Tap the layer and use Clear (or Cut) to delete the selection.
Be wary of the edges. Anti-aliased pixels along each line are blends of black and white, so a hard selection tends to leave a light halo around the lines. On a dark background, that halo reads as a visible white outline. Feathering the selection or raising its threshold reduces it but can also eat into thin lines. This is why the luminance mask is more dependable for anything that will be composited over varied backgrounds.
Alternatives when Procreate isn't the best tool
Procreate is built for drawing, not for scan processing, and community users have found other routes for traditional ink work:
- Autodesk Sketchbook (free): its scan-sketch feature photographs your drawing and automatically places the white background on its own layer. You can hide that layer and export a file that opens in Procreate with transparent lines.
- FireAlpaca, MediBang Paint, or Clip Studio Paint: these offer a layer mode or extraction option that converts white to transparency, including in softer areas.
- Photoshop: removing white by selection is possible there too.
These are worth using if you digitize a lot of traditional inks, but they add a round trip. If you already own an After Effects license, you can also skip the extraction in Procreate entirely, as covered below.
Export for After Effects, Nuke, and Blender
Once your lines are on transparent pixels, export carefully.
- Hide every background layer, including the default background color toggle.
- Go to Actions > Share and choose PNG. PNG keeps transparency; JPEG does not.
- For layered handoff, export PSD so each layer remains separate for compositing.
- For an animation sequence drawn with Animation Assist, export PNG frames rather than a video file, so the alpha channel survives.
On import:
- After Effects: if an edge halo appears, right-click the footage and use Interpret Footage > Main to set alpha to Straight. Verify the result against a dark background.
- Nuke: read the PNG and check whether the Read node is treating it as premultiplied. If you see fringes, unpremultiply, grade, then premultiply again.
- Blender: set the image's alpha mode to Straight in the image editor or shader setup for clean edges.
- Cinema 4D: use the PNG as a texture with its alpha channel feeding the transparency or alpha channel input.
Skip the extraction in After Effects
If you have already exported a white-backed lineart image, you can extract it without returning to Procreate:
- Set the layer's blend mode to Multiply for quick compositing over color.
- Use Effect > Keying > Extract or Luma Key to remove the white by luminance. Adjust the white point and softness to keep thin lines intact.
- For a more controllable result, duplicate the layer, invert it, and use Set Matte or Shift Channels to drive the original layer's alpha from luminance.
- In Nuke, invert the image, shuffle luminance into alpha, and then fill the RGB with your line color.
Doing this in compositing keeps the original scan intact and lets you adjust the threshold throughout the project, instead of committing to one cleanup pass in Procreate.
Common problems and fixes
Lines look gray or washed out after separation. Your source wasn't pure black. Apply Curves before building the mask, or in compositing, add a Levels adjustment to the line layer.
White halo around the lines. You removed white by selection and kept the blended edge pixels. Rebuild using the luminance mask approach.
Paper texture appears as speckles. Raise the white point in Curves until the paper clips to pure white, then separate again. If detail is lost, keep the speckle and use a gentle threshold in your compositing app instead.
Colors underneath look dirty. In Multiply mode, any off-white tints them. Either clean the white point or convert to a true alpha with Method 2.
Thin lines break up. Your image is too small or heavily compressed. Rescan at higher resolution, or redraw at the final canvas size.
Where Styleframe fits after the lines are separated
Cleaning up lineart is a prep step. Getting it moving is usually the harder part, and that's where can sit beside your existing tools. Styleframe is an AI video and motion tool built for artistic control rather than one-click output.
Your compositing, grading, and final lineart cleanup remain where they are. For simple white-to-transparent conversion, the Procreate steps above are enough, and Styleframe is optional for animation and stylization.
Quick checklist
- Boost contrast with Curves so paper is white and lines are black.
- Pick a method: Multiply for painting under, a luminance mask for real alpha.
- Hide all background layers before exporting.
- Export PNG or PSD, or PNG frames for animation.
- Check edges over a dark background in After Effects or Nuke, and fix alpha interpretation if you see fringing.
Following this order gets you line art that behaves like any other alpha-backed asset in your pipeline, with clean edges you can recolor, composite, and animate.