How to Separate Layers in Procreate
StyleFrame Team7 min read
In Procreate, you can only separate merged layers by undoing the merge right away, by selecting the content and cutting and pasting it onto a new layer, or by exporting the layers as individual files. Once you merge two layers and keep working, Procreate has no "unmerge" command, and artwork that overlaps on a merged layer can't be cleanly pulled apart. The reliable habit is to keep elements on separate layers from the start and to duplicate or group instead of merging.
Why Separating Layers in Procreate Is Harder Than Merging Them
Procreate treats a layer as a single raster image. Merge Down, a pinch gesture, or flattening a group all bake the pixels of several layers into one, and the originals are gone. That is fine for painting, where you may be working near the layer limit for your canvas size. It becomes a problem when you want to animate, because a motion designer needs each element on its own layer to move it independently in After Effects.
"Separating layers" can mean three different things:
- Reversing an accidental merge.
- Splitting one layer's content into several layers.
- Getting existing layers out of Procreate as separate files.
Each has a different method.
Method 1: Undo the Merge Immediately
If you merged by mistake, undo is the only true way back.
- Tap the Undo arrow in the sidebar, or tap the canvas with two fingers.
- Repeat until the layers reappear as separate entries in the Layers panel.
This works only while the merge is still in your undo history. If you have painted a lot since then, the merge is permanent. Undoing back to it would also remove everything you did afterward.
The same applies to every merge route: Merge Down from the layer menu, a two-finger pinch across selected layers, and Flatten on a group. All produce one layer, and all are reversed the same way.
Method 2: Cut and Paste Content onto Its Own Layer
When one layer holds several elements that don't overlap, such as a character and a prop, or separate words of lettering, you can split them with a selection.
Using the Actions menu
- Select the layer that holds the combined artwork.
- Open the Selection tool and choose a mode. Freehand works for irregular shapes.
- Draw around the element you want to isolate.
- Open Actions > Add and tap Cut.
- Tap + in the Layers panel to create a new layer.
- Open Actions > Add again and tap Paste.
The element now sits on its own layer, in the same position it had on the original. The original layer loses that content.
Using the gesture shortcut
- Make your selection.
- Swipe down with three fingers to open the copy and paste menu.
- Tap Cut & Paste.
Procreate creates a new layer from the selection automatically and places the content in the same spot. This is the faster route when you're splitting many elements, such as breaking a sketch sheet into individual pieces.
Tips for cleaner splits
- Zoom in before selecting. A loose freehand selection can catch stray pixels of neighboring elements.
- Feather sparingly. Soft selection edges can leave faint halos or cut into anti-aliased edges, which shows up later against a dark background in a comp.
- Rename immediately. New layers get default numbered names, and Procreate lets you rename them from the Layer Options menu. Clear names like "arm_L" or "bg_hills" make the layers easier to find later.
- Check with a background. Hide the other layers and toggle a dark or colored background to catch leftover fragments.
Method 3: Separating Overlapping Artwork
This is where merging does lasting damage. If two elements overlap on a single layer, whatever was hidden underneath is gone. Select and cut the front element, and you'll find a hole behind it, or you'll catch pieces of the back element along with it.
You have a few partial workarounds:
- Select by shape and repaint. Cut out the front element, then paint the missing portion of the back element on its own layer. This works for simple shapes and backgrounds, and it's tedious for detailed art.
- Duplicate and erase. Duplicate the merged layer twice. On the first copy, erase everything except the front element. On the second, erase the front element and repaint what was behind it. You still have to reconstruct hidden pixels by hand.
- Go back to an earlier version. If you have an older copy of the file, such as a duplicate canvas, an iCloud backup, or a previous export, pull the original layers from there.
None of these recovers lost detail automatically. That's why prevention matters more than any repair method.
Habits that prevent the problem
- Group, don't merge. Groups collapse and organize layers without baking them together. Only flatten when you truly need to.
- Duplicate before merging. Duplicate the layers (or the whole canvas), hide the copies, and merge the working versions.
- Name your layers so you can see which elements are meant to move later.
- Keep elements that will animate separately on separate layers, even if they look fine merged on the canvas.
Method 4: Export Layers as Separate Files
If your layers are intact and you need them outside Procreate, you don't need to copy them one by one.
Export from the Share menu
Open Actions > Share. Procreate offers several export routes, including:
- PSD, which keeps layers in a layered Photoshop file.
- PNG, which gives you individual images of your layers when you use the layer sharing option.
- PDF, as a multi-page document.
- Animated formats, such as a simple looping animation.
The Procreate Handbook also describes bulk-exporting layers as individual images.
Drag and drop
In the Layers panel, you can select several layers and drag them into the Files or Photos app. They save as individual PNG images. A Procreate community answer describes this as the way to export many layers at once. You can't export each layer as its own Procreate file this way, but PNGs can be reimported as separate canvases if you need that.
Watch for these export issues
- Blend modes. A layer set to Multiply or Screen can look different once it's exported on its own. Test on a sample before exporting a full set.
- Hidden layers. Hidden layers may not export the way you expect. Turn on everything you need first.
- Color profile. Check that your canvas color profile matches your After Effects project settings to avoid unexpected shifts.
Preparing Separated Layers for After Effects
Once the elements are split, a few steps make the handoff smoother:
- Rename and order layers in Procreate before export so the AE timeline is readable.
- Export a PSD and import it into After Effects if you need precise positions.
- Set anchor points deliberately. A shoulder, elbow, or door hinge needs its anchor moved in AE. Painting those joints with a little overlap in Procreate prevents gaps when a limb rotates.
- Paint extra beneath overlaps. If an arm will swing, paint the hidden part of the shoulder on the torso layer. Doing this before you merge or flatten is far easier than after.
- Check edge quality. Zoom in on a dark background to catch fringes, then clean up on the layer.
This is also where separate layers pay off for other tools. You can place layers at different depths in a 3D scene in Cinema 4D or Blender, or bring them into Nuke as individual elements for compositing.
Where Styleframe Fits After Procreate
Styleframe doesn't recover layers from art that has already been merged. It picks up once you have your artwork, either flattened or layered.
Quick Troubleshooting
I merged and saved, and now I need the layers back. Check for earlier versions, such as a duplicated canvas, backups, or earlier exports. Otherwise you'll need to rebuild the hidden parts by hand.
My cut-and-paste is grabbing parts of the neighboring element. The elements overlap on the same layer. Zoom in, use a tighter selection, or paint the overlap onto the correct layer afterward.
The pasted element shifted. Cut & Paste normally keeps position, but if you used Copy and moved something before pasting, nudge it back with the Transform tool or undo and repeat.
I only need separate files, not separate layers. Skip all of the above and use Share or drag and drop from the Layers panel.
The Short Version
Undo is the only real unmerge. Cut and paste, or the three-finger Cut & Paste gesture, splits non-overlapping content onto new layers. Overlapping merged art can't be cleanly recovered. Exporting through PSD, PNG, or drag and drop gets your layers out of Procreate and into your compositing tools. Keep elements separate while you work, and the rest of the pipeline gets much easier.