How to Select Part of a Drawing in Procreate
StyleFrame Team7 min read
To select part of a drawing in Procreate, tap the Selection tool (the S-shaped icon in the top toolbar) and choose Automatic, Freehand, Rectangle, or Ellipse. Then tap or draw over the area you want. Once the selection is made, tap the Transform arrow to move or scale it, or swipe down with three fingers to cut, copy, or paste it onto its own layer. Selections only affect the active layer, so check which layer is highlighted before you start.
The Basic Selection Workflow
The sequence is the same whichever mode you use:
- Open the Layers panel and tap the layer that holds the artwork you want to select.
- Tap the Selection tool (S icon) to open the selection toolbar.
- Pick a mode: Automatic, Freehand, Rectangle, or Ellipse.
- Make the selection. The canvas dims slightly so the selected area stands out.
- Tap another tool, such as Transform, Brush, or Eraser, to commit the selection and start working inside it. Semi-transparent moving diagonal lines outside the selected area show it has been committed.
- Tap the Selection button again to deselect when you're done.
Selections stay active until you cancel them, which is a common source of confusion. If your brush strokes suddenly stop appearing, you probably still have an old selection masking part of the canvas.
The Four Selection Modes
Freehand
Freehand is the closest thing to a lasso. Trace around the shape with your Apple Pencil or finger, and close the loop by returning to the starting dot. You can drag to draw curves, or tap from point to point to create straight segments. Mix both in one outline when a shape has curved and angular edges.
Use Freehand for organic shapes such as a character's arm, a prop, or a piece of foliage. It's slower than Automatic, but you decide exactly where the edge goes.
Rectangle and Ellipse
These are drag-to-define modes. Drag across the canvas to create a box or an oval. They suit clean geometric areas like backgrounds, panels, circular logos, or sun and moon shapes, and they're quick for grabbing a rough region to crop or clear.
Automatic
Automatic selects by pixel similarity. Tap an area and Procreate selects connected pixels of similar color or tone. After tapping, hold and drag your finger left or right to change the selection threshold:
- Drag left to shrink the selection.
- Drag right to grow it so it flows into neighboring areas.
The selection appears in inverted colors while you adjust, so a large blue area shows up as yellow. Keep tapping other areas to add them. If you drag the threshold too far, the selection leaks into regions you didn't want, so ease off the drag and check the edges.
Automatic works best on flat-color artwork, cel-style shapes, and clean line work. It struggles with textured paint, gradients, and soft brushes, where "similar pixels" aren't clearly separated.
A good combination: grab the bulk of an area with Automatic, then switch to Freehand to add or subtract the fiddly parts.
Refining a Selection
The first pass is rarely perfect. The toolbar gives you several ways to clean it up:
- Add: Extend the selection with another stroke or shape. In Automatic mode, extra taps add regions.
- Remove: Subtract an area. Use this to carve out holes or trim over-selected edges.
- Invert: Flip the selection so everything except your chosen area is selected. This is handy when it's easier to select the background and invert it to get the subject.
- Feather: Soften the selection edge with a slider. Use a small amount when you want an adjustment or fill to blend smoothly, and none when you need a hard, graphic edge.
Zoom in with a pinch before refining. Selection errors that look fine at fit-to-screen show up as rough edges once the art is composited elsewhere.
What You Can Do With a Selection
Move or Transform It
With the selection active, tap the Transform arrow. Drag to move the selected pixels, and use the handles or a two-finger pinch to scale and rotate as needed. The Freeform and Distort options let you transform non-uniformly. Tap the arrow again to apply.
Move It to Its Own Layer
This is the most useful operation for anyone passing artwork downstream:
- Make the selection on the source layer.
- Swipe down with three fingers to open the Copy & Paste menu.
- Choose Cut & Paste to lift the selection onto a new layer and remove it from the original, or Copy & Paste to duplicate it.
This lets you separate elements you drew on a single layer, such as a character's hand, a shadow shape, or one color region, without redrawing anything. It's also the quickest fix when you realize you painted two things together that should have been independent.
Edit Only Inside the Selection
Anything you paint, smudge, or erase is confined to the selected area. That makes selections work like a mask. Use them to:
- Shade a shape without going over its edges.
- Apply Adjustments (such as Hue and Saturation) to one region only.
- Use ColorDrop to flood the selection with the current color.
- Clear to delete the contents of the selection.
Isolate a Single Color
To pull one color out of a mixed layer, use Automatic mode, tap that color, and tune the threshold. Then use the three-finger swipe and Cut & Paste. The color moves to its own layer and disappears from the original, so you can recolor or adjust it independently.
Common Problems and Fixes
Nothing happens when you draw. A selection is probably still active. Tap the Selection button to cancel it.
The selection won't grab what you tap. Check that the correct layer is active, since artwork on a different layer may not respond.
Automatic selects too much or too little. Adjust the threshold by holding and dragging after the tap, and refine with Add or Remove in Freehand mode.
Jagged or haloed edges after moving. Try a slight feather, or clean the edge with the Eraser in a softer brush. For art with anti-aliased edges, Automatic selections can leave a thin fringe of the old color, so expand or tidy the selection before you cut.
You moved the wrong thing. Undo and try again, and check the active layer before you move anything.
Getting Selections Ready for a Motion Pipeline
If your Procreate artwork is headed for animation or compositing, the selection tool is mostly a separation tool. The goal is clean elements on named, individual layers so downstream work is easier.
A practical routine:
- Use Freehand or Automatic to select each element that will move independently, such as limbs, props, background shapes, and highlights.
- Cut & Paste each one onto its own layer, then name the layers.
- Check edges on a contrasting background layer so you catch halos before they reach your compositor.
- Export your layers in a format your compositing software can read.
Separating elements at this stage saves rotoscoping and cleanup later. Keep in mind that anything you plan to scale up significantly in a composite should be drawn at a canvas size that supports it.
Quick Reference
Learn the four modes, get comfortable combining them, and make Cut & Paste your default way of separating elements. That one habit does most of the work of keeping a Procreate file organized for whatever comes next.