How to Select Overwrite Colors in Procreate
StyleFrame Team8 min read
Procreate has no single "overwrite colors" command. You replace existing colors by isolating the pixels you want to change, then recoloring them with Recolor, ColorDrop, or Alpha Lock plus Fill Layer. For a quick swap, choose your new color, trigger Recolor from the Quick Menu, drag the crosshair onto the area you want to change, and adjust the flood threshold until the fill covers it cleanly. On a flat, single-color layer, turning on Alpha Lock and tapping Fill Layer is faster and more predictable.
What "Overwrite Colors" Means in Procreate
When people search for this, they usually want one of three things:
- Replace one specific color or shape with another (a logo, a character's jacket, a background panel).
- Repaint over existing color on a layer without disturbing the transparent areas.
- Shift the whole palette of a layer or image.
Procreate handles each with a different tool. Picking the right one up front saves you from fringed edges, color spill, and rebuilt selections.
Menu locations also move between Procreate versions. Recolor in particular has been relocated in past updates, so if you can't find something below, check Actions, Gesture Controls, and the Layer menu.
Method 1: Recolor (Fastest for Targeted Swaps)
Recolor works in real time. It samples the area under a crosshair and fills connected, similar-colored pixels with your active color.
Set it up
- Open Actions (wrench icon) > Prefs > Gesture Controls.
- Find Quick Menu and assign Recolor to one of its slots.
- Trigger the Quick Menu on the canvas (a tap-and-hold or a touch gesture, depending on your settings) and tap Recolor.
Use it
- Select the right layer. Recolor only affects the active layer. Many bad results come from working on the wrong one.
- Pick your new color in the Color panel.
- Turn on Recolor from the Quick Menu. A small crosshair appears.
- Drag the crosshair onto the target area. The fill follows it, so move it around until the right region changes.
- Adjust the flood threshold at the bottom of the screen if the fill is missing edges or leaking into neighbors.
- Change the color while Recolor is active. The affected area updates live, so you can audition several options without restarting.
Where it struggles
Recolor reads the pixels under the crosshair. On textured brushwork, gradients, or noisy grain, results shift depending on exactly where you place it. If the whole background changes, the crosshair is probably sitting on a color shared by both the object and its surroundings. Move it, or lower the threshold.
Method 2: ColorDrop With Threshold Control
ColorDrop is the more familiar fill approach and gives you more direct control over how much gets replaced.
- Select the layer containing the color you want to overwrite.
- Drag the color swatch from the top-right corner onto the area.
- Keep your Apple Pencil or finger on the screen after dropping. Slide left or right to adjust the fill threshold, then lift to commit.
A low threshold replaces only pixels very close to the sampled color. A higher one pulls in nearby shades, which helps with anti-aliased edges but risks bleeding into adjacent shapes.
Check the Reference and Fill settings in the top toolbar as well. If Reference is set to use all layers rather than the active layer, the fill may behave as if your linework is blocking it, or ignore the layer you thought you were editing.
Method 3: Alpha Lock and Fill Layer (Best for Flat Shapes)
If a layer contains one solid color, you don't need any selection logic.
- Choose your new color.
- Open the Layers panel, tap the layer, and enable Alpha Lock. The checkerboard pattern on the thumbnail confirms it's on.
- Tap the layer again and choose Fill Layer.
Fill Layer applies your active color across the whole layer. Because Alpha Lock protects transparent pixels, only the existing shape is recolored. The edges stay intact, including soft anti-aliased ones, because partial transparency is preserved.
You can also paint directly on an Alpha-Locked layer with any brush. That lets you overwrite color selectively with a texture, rather than flooding the whole shape.
The non-destructive variant
If you want to keep the original color:
- Create a new layer above the shape.
- Set it as a Clipping Mask (tap the layer, choose Clipping Mask).
- Fill or paint on the clipped layer.
Now the color lives on its own layer and is masked to the shape beneath. Delete or hide it to revert. You can also change the blend mode (Color, Multiply, Overlay) to tint the original instead of replacing it.
Method 4: Select by Color Similarity, Then Fill
For more complex artwork where Recolor or ColorDrop bleeds into the wrong places, use a selection as a guardrail.
- Choose the Selection tool (S icon).
- Set the mode to Automatic.
- Tap the area you want to change. Drag your finger or pencil to adjust how similar a color must be to be included.
- Use Add or Remove to refine. Tap Feather if you need softer edges.
- Pick your new color and use Fill Layer, ColorDrop, or a brush. The change only lands inside the selection.
This is more steps, but it's the most predictable option on layers with several adjacent shapes of similar color. For layers made of defined shapes, you can also use Layer menu > Select to turn the layer's content into a selection in one step.
Method 5: Adjustments for Global or Tonal Color Shifts
If you're not replacing a specific color but changing the feel of an entire layer or image, use the Adjustments menu (the magic wand icon).
- Hue, Saturation, Brightness is the quickest way to rotate a palette. Drag Hue to move every color around the spectrum, Saturation to mute or intensify, and Brightness to lighten or darken.
- Color Balance shifts the red, green, and blue mix, with separate control over shadows, midtones, and highlights. Midtones is the default and gives the most even results.
- Curves gives the finest control over color and contrast, including per-channel adjustments against a histogram.
- Gradient Map remaps tonal values to a new color ramp, which works well for restyling grayscale or monochrome artwork.
Adjustments apply to the active layer, or to a selection if one is active. Apply them to a duplicate layer if you may want to compare against the original.
Which Method Should You Use?
Troubleshooting Common Problems
The recolor leaves a halo or fringe. Anti-aliased edge pixels sit between the old color and transparency. Raise the threshold slightly, or switch to Alpha Lock, which preserves edge transparency by design.
The wrong area changes. Check that you're on the intended layer, and that your Reference setting isn't sampling a different one. Then reposition the crosshair or lower the threshold.
Texture breaks up the fill. Textured brushwork has many slightly different values. Increase the threshold, or recolor the underlying flat shape on its own layer instead.
Color looks different after export. Check the canvas color profile in your document settings before you start. Mismatched profiles between Procreate and your compositing app are a common reason a "matching" color shifts in After Effects, Premiere Pro, or Nuke. Test one export early.
Getting Recolored Procreate Art Into a Motion Pipeline
If the artwork is headed for animation, set up for recoloring before you export. Keep each color-critical element on its own layer, name layers clearly, and export a layered PSD or separate PNGs with transparency. That way a client color note becomes a Fill Layer or Hue adjustment in Procreate, or a color correction in After Effects, rather than a repaint.
For a handful of styleframes, Procreate's tools are enough. The harder case is carrying a palette or look across a full sequence, where manually recoloring each frame stops being practical. Procreate remains where you set the palette, and your compositing app remains where you finish.
Quick Answers
Is there a literal "overwrite color" button in Procreate? No. The closest equivalents are Recolor, ColorDrop, and Fill Layer with Alpha Lock.
Does Recolor work on every layer type? It works on the active pixel layer. Check that the correct layer is selected before you start.
What's the safest method for keeping edges clean? Alpha Lock with Fill Layer, or a clipped layer above the shape.
Can I recolor only part of a layer? Yes. Make a selection first, then fill or use an adjustment, and the change stays inside it.
Pick the narrowest tool that does the job. Alpha Lock for flat shapes, Recolor or ColorDrop for targeted swaps, selections when neighboring colors compete, and Adjustments when the whole palette needs to move.