How to Select Areas in Procreate 4.2
StyleFrame Team7 min read
In Procreate 4.2, tap the Selection icon (in the top toolbar), then choose one of four modes at the bottom of the screen: Automatic, Freehand, Rectangle, or Ellipse. Make your selection, refine it with Add, Remove, Invert, or Feather, then tap any other tool to commit it. A committed selection shows moving diagonal lines outside the selected area, and from then on only the selected pixels can be painted, erased, filled, or transformed.
What the Selection Tool Does in Procreate 4.2
The Selection tool limits your edits to part of a layer. Once an area is selected, brushes, the eraser, smudge, ColorDrop, and Transform only affect that region. Everything outside the selection stays untouched, which makes it safer than painting carefully around an edge.
Procreate 4.2 (released November 2018) expanded selections with shape-based modes and feathering. If you're on an older version, you may not see the same toolbar. You can replay the "What's new?" animation under Help in the Actions panel to see whether your version includes these features.
How to Activate and Cancel a Selection
- Tap the Selection icon in the top toolbar. It turns blue and the mode options appear at the bottom.
- Pick a mode. The highlighted one is active.
- Make your selection on the canvas.
- Tap another tool, such as Brush, Smudge, Eraser, or Transform, to commit the selection and start editing.
- To exit, tap the Selection icon again so it's no longer blue.
The selection stays active while you switch between other tools, so you can paint, erase, and fill inside the same area without reselecting. You can also zoom, pan, and rotate the canvas mid-selection, which helps when you're working near an edge.
The Four Selection Modes
Automatic
Automatic is the closest thing Procreate has to a magic wand. Tap a spot on the canvas and it selects that area automatically.
- Adjust the threshold: Tap an area, then hold and drag your finger or stylus left or right. Dragging right expands the selection into neighboring pixels, and dragging left shrinks it. The threshold behaves much like ColorDrop's.
- Add more areas: Keep tapping other regions to build up the selection.
- Read the preview: Selected areas can appear in inverted colors, so a selected blue region may look yellow.
Automatic works best on flat, clearly separated color, like inked shapes, vector-style art, or cleaned-up line work. On textured or painterly layers, the threshold slider takes more fiddling, and the edge may come out ragged.
A useful tip from Procreate's own documentation: start with Automatic for the bulk of the shape, then switch to Freehand to clean up the edges.
Freehand
Freehand gives you the most control. You can draw a loose outline with a stylus or finger, or place straight-edged segments for hard-edged shapes. Close the shape, and Procreate selects everything inside the outline.
Use it for:
- Irregular shapes with no color boundary to key off
- Fixing stray areas that Automatic picked up
- Isolating one element from a busy, textured layer
Zoom in before tracing, especially if you plan to cut something out and drop it into a comp. A selection made at fit-to-screen zoom will show wobble on the edges.
Rectangle
Drag diagonally across the canvas to define a rectangular selection. It's useful for crops, panel boundaries, UI-style elements, and quickly isolating a region of a texture sheet.
Ellipse
Ellipse works like Rectangle but produces round or oval selections. Start from the upper corner of an imagined bounding box and drag out. Use it for circular masks, vignettes, highlights, and eyes or other rounded details.
Refining a Selection
Once you have a selection, the bottom toolbar offers several ways to change it:
- Add: Include more area. Switch modes freely, for example Automatic for the main shape, then Freehand to add a missing piece.
- Remove: Subtract an area from the current selection, using whichever mode suits the cut.
- Invert: Flip the selection so everything outside becomes selected. This is the fastest way to protect a shape while editing the surroundings.
- Feather: Soften the edge of the selection. Use it when you want a gradual falloff for glows, shadows, or blended color rather than a hard cut.
- Copy & Paste / Duplicate: Place the selected pixels on their own new layer.
- Clear: Remove the current selection and start over.
Toolbar labels vary slightly between Procreate versions, so if a button is named differently on your device, check its icon and neighbors rather than assuming it's missing.
Selecting Everything on a Layer
You don't always need to select by hand. To select all painted pixels on a layer:
- Open the Layers panel.
- Tap the layer you want.
- Tap it again to open its options menu.
- Tap Select.
This activates the Selection tool and loads all non-transparent content on that layer as the selection. It's the quickest way to lock edits to an element's exact silhouette, and a good starting point for recoloring or adding shading.
Isolating a Color or Shape on Its Own Layer
A common production move is pulling one color or shape out of a flattened layer:
- Choose Automatic mode and tap the color you want.
- Adjust the threshold until the selection captures the full shape.
- Swipe with three fingers to open the cut and paste options.
- Choose Cut & Paste to move the pixels to a new layer. They're removed from the original.
If you want to keep the source untouched, use Copy & Paste instead. Once the element is on its own layer, you can move, recolor, or export it independently.
Adjusting How the Selection Looks
The default shading on unselected areas can be too faint or too heavy to judge your edit. To change it, go to Actions → Prefs → Selection Mask Visibility and adjust the slider. A higher setting makes it easier to see precisely what's protected, which matters when you're working on dark art or low-contrast textures.
Gestures That Speed Things Up
- Two-finger tap: Undo the last selection step.
- Three-finger tap: Redo.
- Three-finger swipe: Open the cut and paste options.
- Pinch, pan, rotate: Navigate the canvas while a selection is active.
Undo is especially helpful in Automatic mode, where a threshold that overshoots can be rolled back with a single tap.
Common Problems and Fixes
The selection leaks into areas you didn't want. Lower the threshold, or use Remove with Freehand to subtract the leak.
Edges look jagged after a cut. Zoom in and redo the selection, or use Feather for softer edges when the element will be composited later.
Edits are happening on the wrong part of the canvas. Check that the Selection tool is committed (look for the moving diagonal lines), and confirm you're on the right layer.
You can't tell what's selected. Raise the selection mask visibility in Prefs.
Nothing happens when you tap in Automatic mode. You may be on an empty layer, so make sure the layer with the artwork is selected.
Using Procreate Selections in a Motion Design Pipeline
If you're a motion designer, animator, or VFX artist, Procreate usually isn't your final stop. It's where you paint textures, concept frames, hand-drawn elements, or storyboard beats before they go into After Effects, Photoshop, Nuke, Cinema 4D, or Blender. Selections help you prepare that material:
- Split elements into separate layers with Copy & Paste so each piece can be animated independently after export.
- Protect clean shapes with Invert while painting backgrounds, so the foreground silhouette stays crisp.
- Feather selected areas for glows, light wraps, or soft shadow passes that you'll blend in the comp.
- Name and organize layers before export so your PSD or PNG sequence arrives in After Effects ready to rig.
Keep in mind that selections in Procreate are raster-based. For anything that needs resolution independence or scaling in motion, paint at a high canvas size from the start.
Where Styleframe Fits After Your Selections
Once you've isolated and refined elements in Procreate, you may want to push them into motion or restyle them without losing control of the look. Styleframe is an AI video and motion tool. Check its current documentation for supported inputs, tools, and export options before building it into your pipeline. Your hand-drawn, carefully selected artwork stays at the center of the process.
Quick Reference: How to Select Areas in Procreate 4.2
- Tap the Selection icon.
- Choose Automatic, Freehand, Rectangle, or Ellipse.
- Make the selection, adjusting the threshold in Automatic.
- Refine with Add, Remove, Invert, or Feather.
- Tap another tool to commit, then paint, erase, fill, or transform.
- Tap the Selection icon again to exit.
Practice the Automatic-then-Freehand combination first. It handles most real-world selections quickly and gives you clean, controllable edges to carry into your next stage of production.