How to Select and Remove Background in Procreate
StyleFrame Team8 min read
Procreate has no dedicated one-tap background remover, so you select the background (or the subject) with the Selection tool and then delete it or hide it behind a layer mask. For flat or solid backgrounds, use Automatic selection: tap the background, drag to set the threshold, then cut it. For complex edges, trace the subject with Freehand, invert the selection, clear the outside, and tidy up with the eraser. Export as PNG or PSD so the transparency survives.
What Procreate Can and Can't Do for Background Removal
Procreate is a painting app, not a photo editor. Its selection tools work from color similarity and manual tracing, not subject detection. That means results depend heavily on the source image: a clean illustration on white is a ten-second job, while a photo with hair, motion blur, or a textured backdrop takes patience.
Four tools do most of the work:
- Automatic selection picks regions of similar color with an adjustable threshold.
- Freehand, Rectangle, and Ellipse selection let you outline what to keep or remove by hand.
- Layer masks hide pixels without destroying them.
- The eraser handles cleanup on edges and leftover specks.
Understanding which one fits your image saves a lot of undo gestures.
Method 1: Automatic Selection for Solid or Near-Solid Backgrounds
This is the fastest route for scanned sketches, flat illustrations, logos, and product shots on white.
- Import your image through Actions (wrench icon) → Add → Insert a photo, then position it on the canvas.
- Make sure the image layer is active. Tap the Selection tool (the S icon).
- In the bottom toolbar, choose Automatic and make sure Add mode is active.
- Tap the background. Keep your finger or Pencil down and drag left or right to adjust the threshold. The selected area appears with a different color treatment, so keep adjusting until the whole background is covered without eating into the subject.
- Cut the selection. A three-finger swipe down opens the Cut/Copy/Paste menu, or you can use the Layer options. A three-finger scrub left and right clears the selection directly.
- Hide the canvas background color layer. The gray checkerboard behind your subject confirms the pixels are actually transparent.
You don't need a perfect selection on the first try. Get most of the background out, then erase the remaining specks with a hard eraser brush. Zoom in for this step, since small leftover fragments are easy to miss.
Select the Background, or Select the Subject?
You can reach the same result either way. If the background is simpler than the subject, select the background and cut it. If you'd rather keep the subject, select the background, tap Invert, then use Copy & Paste to place the subject on a new layer. Hide the original and you have a clean isolated cutout. This copy-to-new-layer approach is safer because the source image stays untouched underneath.
When Automatic Selection Fails
Automatic selection struggles with gradients, soft shadows, watercolor textures, and photographic noise, because the threshold can't separate background from subject cleanly. You'll see either a ragged selection or a subject that gets partly eaten. When that happens, switch to manual tracing or combine both: use Automatic to remove the bulk, then Freehand for the difficult edges.
Method 2: Freehand Selection for Complex Subjects
For photos or images where color-based selection doesn't work, trace the subject yourself.
- Duplicate the image layer first and hide the original. It's cheap insurance if you make a mistake.
- Open the Selection tool and choose Freehand with Add active.
- Zoom in and trace around the part you want to keep. Work in short, deliberate strokes if the outline is intricate.
- Close the loop by returning to your start point. Alternatively, leave a small gap and finish the selection from the toolbar. Tapping the starting dot closes the selection and commits it.
- Tap Invert so the background is selected instead of the subject.
- Clear the area with the three-finger scrub or Cut.
A few practical notes from working this way:
- Undo is a two-finger tap. Use it freely while tracing.
- Tapping the starting dot completes the selection. Beginners often think their outline vanished when it was actually closed and committed.
- Use the minus (Remove) mode to carve out holes, like the gap between an arm and a torso, instead of redrawing the whole outline.
Method 3: Layer Masks for Non-Destructive Removal
If you want to keep the ability to bring back pixels, use a mask instead of deleting.
- Make your selection of the subject using Automatic or Freehand.
- Open the Layers panel, tap the image layer, and choose Mask. The selection becomes the mask, and the areas outside it are hidden.
- Select the mask thumbnail and paint with black to hide more, or white to reveal more. A small, hard brush works for crisp edges, and a soft one for gentler transitions.
Masks are the better choice for client work or anything that might go through revisions. You can refine edges over several passes without ever committing to a destructive cut. When you're done, you can pinch the mask and layer together to merge them.
Cleaning Up Edges
Whichever method you use, edge quality is what separates a usable cutout from an obvious one.
- Zoom in close and sweep the edges with a hard eraser to remove fringe pixels and specks.
- Check against a contrasting background. Turn the background color layer to a dark color, then a light one, to expose halos. White fringing that disappears on white will show up immediately on dark.
- Avoid overly soft edges unless the subject genuinely has them. A blurry mask on a sharp illustration looks wrong.
- Work at high canvas resolution. If you plan to print or comp at large sizes, set the canvas size appropriately before you start, since cutting out at a low resolution limits what you can do afterward.
Exporting With Transparency
Hide the background color layer before exporting, or the export will include the solid color. From Actions → Share, you can choose from several formats:
- PNG keeps transparency and is the right default for single cutouts.
- PSD preserves layers, which is useful when you want to keep masks and adjust things in another app.
- TIFF is available if your pipeline prefers it.
- JPEG does not support transparency, so avoid it for cutouts.
If you're exporting a sticker or a printable element, crop the canvas tight to the subject through Actions → Canvas → Crop & Resize before exporting, so you aren't carrying around a mostly empty frame.
Bringing Procreate Cutouts Into After Effects, Premiere, or Nuke
For motion designers, a Procreate cutout is usually one ingredient in a larger comp. A few things help it behave:
- Import the PNG or PSD into your compositing app. A PSD can keep layers separate if you want to animate parts separately.
- Watch for edge fringing. Cutouts from light backgrounds can carry a pale halo when placed over dark footage. Your compositing app's edge-cleanup tools, such as a choke or erode, can help.
- Keep your source and cutout separate. Don't overwrite your original image, so you can redo the cutout if the comp changes.
- Match resolution to the comp. Procreate canvases can be large, but make sure your cutout isn't being scaled up significantly in a 4K timeline.
Procreate works well for illustration and stills, but it isn't built for moving footage. If you need to remove a background across a sequence of frames, a frame-by-frame selection workflow isn't practical.
Where Styleframe Fits
Procreate handles single-image cutouts well. Once your illustration or concept art needs to move, or you need a background removed across many frames, you need something built for motion work. Styleframe is one tool aimed at that kind of work.
A practical example: you paint a character in Procreate, bring it into a motion tool as a reference, and remove the background on the result so the character sits on a transparent layer ready for compositing.
A motion tool like this can fit into an existing pipeline instead of replacing it. You keep your comp, your color management, and your finishing tools. Procreate stays where it's strongest, which is drawing and painting, and a motion tool takes over when the work needs to move.
Quick Troubleshooting
- The whole image disappeared when you cut. Your selection was probably inverted, or nothing was selected. Undo, check what's highlighted, and use Invert if needed.
- You can't see transparency. Hide the background color layer and any layers beneath your subject.
- Automatic selection grabs too much or too little. Adjust the threshold by dragging, or switch to Freehand for the problem areas.
- Selection outline vanished while tracing. You likely tapped the start dot and closed it. It's committed, not lost. Add or remove from it.
- Speckles remain after cutting. Use a hard eraser brush at high zoom, or add them to the selection with Automatic in Add mode and cut again.
Summary
Pick the method that matches the image. Use Automatic selection for flat backgrounds, Freehand for photos and complicated edges, and masks when you want to stay non-destructive. Clean up edges at high zoom, test against both light and dark backgrounds, and export PNG or PSD with the background color layer hidden. Then move the cutout into After Effects, Premiere Pro, or Nuke for compositing, and bring in a motion-focused tool when the work leaves the still frame.