How to Select and Color Lineart in Procreate
StyleFrame Team7 min read
To select lineart in Procreate, put the lines on their own layer, then tap that layer and choose Select, or use the Selection tool in Automatic mode to pick the enclosed areas between lines. To color it, set the lineart layer as a Reference layer and ColorDrop flat colors onto a layer underneath. To recolor the lines themselves, turn on Alpha Lock or add a clipping mask above the layer. The Reference and clipping mask approaches leave the original lines untouched, which matters when the drawings end up as animation frames or compositing elements.
Prepare the lineart before you select anything
Most selection and fill problems come from the file, not the tool. A few minutes of setup saves a lot of cleanup later.
- Keep lines on their own layer. Never draw lines and color on the same layer. Name it "LINE" so you can find it quickly.
- Use a transparent background. Selections and fills read pixels, and a white paper layer or a lineart layer with baked-in white will make Automatic selection behave unpredictably. If you drew on white, set the lineart layer to Multiply as a quick fix, or select the white area, delete it, and keep only the ink.
- Work at delivery resolution. If the art is headed into a 4K comp, create the canvas at 3840×2160 or larger. Upscaling thin lines later softens them, and recoloring soft edges is harder than recoloring crisp ones.
- Close your shapes. Gaps in a contour let fills leak. Zoom in and patch obvious breaks with a small brush on a separate "FIX" layer.
- Pick a color profile on purpose. Check which color profile your canvas uses before you start painting. Decide this before you paint, so your colors match what you see in After Effects later.
Method 1: Select the lineart or the areas inside it
Procreate gives you a few ways to select, depending on whether you want the lines or the spaces between them.
Select the lines themselves
Tap the lineart layer and choose Select from the layer menu (available in recent versions of Procreate). This creates a selection from the layer's actual pixels. It is useful when you want to recolor, feather, copy, or transform only the ink.
If your version doesn't show that option, there are two fallbacks. You can use Alpha Lock (covered below), or you can tap the Selection tool, choose Automatic, and tap a line. Drag your pen left or right after tapping to adjust the threshold until the whole stroke is captured.
Select the enclosed areas
For flat coloring, you usually want the opposite: the shapes between the lines.
- Make the lineart layer active.
- Tap the Selection tool (the S-shaped icon) and choose Automatic.
- Tap inside a closed shape. Drag to adjust the threshold until the selection meets the lines cleanly, including any anti-aliased edges.
- Use Add to build up several shapes, and Remove to subtract.
- Tap Color Fill at the bottom, or switch to a color layer and fill the selection.
If a selection looks empty or wrong, check which layer is active first.
Select the whole character
A quick way to isolate a silhouette is to select the outside of the character and invert. Tap the background with Automatic, tap Invert, and you have the full shape including the area inside the lines. This is useful for a base color layer or a mask for later compositing.
Method 2: Reference layer plus ColorDrop for flat colors
This is a fast way to flat color clean lineart, and it avoids building a selection for every shape.
- Open the lineart layer menu and tap Reference.
- Create a new layer below the lineart and make it active.
- Drag a color from the color disc in the top right and drop it inside a closed shape. This is ColorDrop.
- Before releasing, keep your pen held down and slide left or right to set the fill threshold. Adjust it until the fill meets the line and covers anti-aliased edges.
Because the fill is calculated from the reference layer but painted on the layer beneath, the lines stay untouched and your colors remain editable. If a color doesn't reach the edge of the line, you may see a thin light halo. Adjust the threshold, or use the fix at the end of this section.
Fixing halos and leaks
- Halo around the lines: adjust the ColorDrop threshold, or paint a slightly oversized color layer and let the lineart sit on top. Colors that tuck under the line never show gaps.
- Fill floods the whole canvas: there is a gap in the contour. Find it, close it on the FIX layer, and fill again. Don't rely on a high threshold to jump gaps.
- Tiny islands left unfilled: inside tight areas like eyes or hair strands, switch to a small hard brush on the color layer and paint them in by hand.
Method 3: Recolor the lines with Alpha Lock or a clipping mask
Black lineart often looks heavy once color is added. Selective color lines, such as darker tones of the fill color, usually read as more refined.
Alpha Lock
Swipe two fingers to the right on the lineart layer to enable Alpha Lock. Now anything you paint only affects pixels that already exist, so you can brush, fill, or gradient the lines without touching transparent areas. Tap the layer menu and choose Fill Layer to recolor everything at once, or paint specific sections by hand.
The downside is that Alpha Lock is destructive. Duplicate the layer first if you might want black lines back.
Clipping mask
For a non-destructive approach:
- Create a new layer above the lineart.
- Tap it and choose Clipping Mask.
- Paint on it. Color only appears where the lineart is.
You can change the blend mode on the clipped layer to Color or Multiply, and delete the layer later without harming the original lines. This is the better habit for production work because revisions are common.
Organize layers for shading and revisions
A tidy stack makes later changes trivial. A sensible structure from top to bottom:
- Highlights (clipped to the base color)
- Shadows (clipped, set to Multiply)
- Colored lines (clipping mask over the lineart)
- LINE (Reference)
- FIX (gap patches)
- Base color
- Optional background
Group related layers per character or per object. Selecting a base color layer's pixels (tap the layer, then Select) lets you create shading masks that stay inside the silhouette, so shadows never spill out.
Export for After Effects and other compositing tools
How you export depends on what happens next.
- Layered file: export a PSD if you want to bring separated line, color, and shadow layers into After Effects, Photoshop, or Nuke. Check that layer names carry through, so naming matters.
- Transparent PNG: hide the background layer and export PNG for single elements. If you see dark or light fringes after importing, check the alpha interpretation (straight vs. premultiplied) in your compositor.
- Animation frames: if you are drawing frame by frame with Animation Assist, export a PNG sequence rather than a compressed video so you keep alpha and avoid generation loss. Set the frame rate to match your composition.
- Keep naming consistent: use zero-padded frame numbers and consistent layer names across files so the sequences relink without manual work.
Where Styleframe fits in a Procreate lineart workflow
Procreate handles drawing and flat coloring well. Styleframe is a separate tool you can consider when you want to take finished frames further without losing artistic control. Check its current documentation for which features and export options are available.
A few practical ideas:
- Keyframes: treat your colored key poses from Procreate as keyframes for generating motion between them, rather than hand-drawing every in-between.
- Consistent style: use your inked and painted frames as a style reference so a consistent line and color treatment carries across a sequence.
- Clean-up and delivery: isolate a character from a flat backdrop, or bring a finished frame up to production resolution.
Keep your Procreate source files untouched while you experiment, so you can try several directions without overwriting them. Your lineart, color decisions, and compositing stay in your hands.
Quick checklist
- Lines on their own transparent layer, at delivery resolution.
- Patch gaps on a separate layer.
- Set lineart as Reference, then ColorDrop flats on a layer below.
- Use Automatic selection for precise shapes, and Select from the layer menu for the lines themselves.
- Recolor lines with a clipping mask when you need to stay non-destructive.
- Shade with clipped Multiply layers.
- Export PSD or PNG sequences with consistent naming.
Once you have this routine, selecting and coloring lineart becomes mostly mechanical, leaving your time for the drawing and motion decisions that actually define the work.