How to Select All Lines in a Layer in Procreate
StyleFrame Team9 min read
To select all the lines on a layer in Procreate, tap the layer's thumbnail in the Layers panel and choose Select. Procreate selects every non-transparent pixel on that layer, so your linework is captured and the empty canvas around it is not. You can then copy, recolor, feather, invert, or fill the selection. If you only want to edit the lines without selecting them, turn on Alpha Lock instead.
The Quick Steps
- Open the Layers panel and make sure the layer with your lines is active.
- Tap the layer's thumbnail (or tap the layer once more if it's already highlighted) to open its menu.
- Tap Select.
- A selection appears around the painted pixels, shown with the diagonal-stripe mask over unselected areas.
- Use the toolbar or the three-finger swipe down gesture to copy, cut, or paste. Or open the Selection tool for options like Feather, Invert, and Color Fill.
If you don't see Select in the layer menu, update Procreate. The option belongs to the 5.x versions, and its absence usually means an older install.
What "Select" Actually Does
Procreate is a raster app, so your lines aren't objects with paths the way they are in Illustrator or an After Effects shape layer. Every stroke is baked into pixels. When you choose Select, Procreate reads the layer's alpha channel and builds a selection from everything that isn't fully transparent.
This has practical consequences:
- Anti-aliased edges are included. Soft or semi-transparent edge pixels become part of the selection, with partial opacity carried through. This is usually what you want for clean line art.
- Stray marks count too. A faint smudge, an accidental dot, or a near-invisible stroke from a low-opacity brush will be selected. If your selection outline looks bigger than your drawing, there is probably something small off to the side.
- Fills count as content. If your layer has a white or colored background fill, the whole canvas is non-transparent, and Select will grab everything. Keep line art on its own layer with a transparent background.
- Only the active layer is read. Lines on other layers are not selected. Procreate doesn't have a "select all lines in the document" command, so you have to handle layers one at a time or group them.
Method 1: Layer Menu → Select
This is the fastest route and the one to default to.
Once the selection exists, you can:
- Color Fill: In the Selection tool's bottom toolbar, turn on Color Fill and drag the color from the top-right circle into the selection. This recolors the lines. Because the selection includes soft edge pixels with partial opacity, the fill respects the edge quality in most cases, but test on a duplicate layer to confirm the result.
- Feather: Softens the selection edge before you do anything else, useful for glow or blur treatments.
- Invert: Selects everything except the lines, which is handy if you want to fill the negative space or cut the lines out of a background layer.
- Copy & Paste: Swipe three fingers down to bring up the copy and paste menu. "Cut & Paste" moves the lines to a new layer, and "Copy & Paste" duplicates them.
Always clear the selection when you're done (tap the Selection tool again, or tap the canvas with the selection tool active in some modes). A leftover selection will quietly restrict every brush stroke you make afterward, which is a classic cause of "why won't Procreate paint?"
Method 2: Alpha Lock for Editing Lines Only
Often you don't need a selection at all. If your goal is to recolor or texture the lines, Alpha Lock does the job with less friction.
- Swipe two fingers to the right on the layer, or open the layer menu and tap Alpha Lock. A checkerboard pattern shows on the thumbnail.
- Anything you now paint only lands on pixels that already have content. Your transparent areas stay transparent.
- Pick a color and fill the layer (drag the color circle onto the canvas) to recolor every line at once, or paint over them with a textured brush.
The tradeoff: Alpha Lock is non-selective. There's no feathering and no inversion. If you need those, use Select. If you need to quickly change the color of a whole line layer, Alpha Lock is simpler and easier to undo.
Method 3: Transform Without Selecting
If the reason you're selecting all lines is to move, scale, or rotate them, skip the selection. With the layer active, tap the Transform tool (the arrow icon). With no active selection, Procreate transforms the entire layer's contents. This avoids the odd edge clipping that can occur when a selection's bounding area is tight against the artwork.
For multiple layers, select them first. Swiping right on each layer in the Layers panel adds it to a multi-layer selection, and Transform then moves them together. Recent Procreate updates (5.4.11 is described as adding bulk actions) also let you act on several selected layers at once, such as duplicating or grouping them. Check your version if those options don't appear.
Method 4: Find the Right Layer First
Half the "I can't select my lines" problems turn out to be "I'm on the wrong layer." Procreate's Layer Select gesture solves this. Assign it under Actions → Prefs → Gesture Controls → Layer Select, choose a trigger (touch, or a modifier button plus touch), then tap the line on the canvas. Procreate briefly shows the name of the layer beneath your finger. If several layers overlap at that point, it displays a panel for each so you can pick the correct one.
Once the right layer is active, tap its thumbnail and choose Select.
Selecting Lines Across Multiple Layers
When your drawing is split across layers (for example, outlines, details, and hatching), you have a few choices:
- Group first, then merge a duplicate. Swipe right across the layers to select them, group them, duplicate the group, and flatten the duplicate. Then use Select on the flattened layer. Your original layers remain intact.
- Merge Down or Combine Down. If you're confident you won't need the layers separate, merge them into one. This is destructive, so save a copy of the file first.
- Work layer by layer. For small jobs, it can be quicker to run Select on each layer in turn and use the selection add mode. (Add mode in the Selection tool lets you build up a selection from several steps.)
Duplicating before you flatten is the safest habit. Procreate's undo history is generous but not infinite, and flattening line work you later need to edit is a painful mistake.
Troubleshooting
The selection covers the whole canvas. Your layer has a background fill, or a near-invisible tint covers it. Hide other layers and check the thumbnail for a solid color. Clear or erase the fill, or move the lines to a clean layer.
The selection leaves out light or thin lines. Very low-opacity pixels may not show clearly in the selection preview even if they're included. Look at the edges after applying Color Fill, or temporarily raise contrast by placing a dark layer behind.
Select isn't in the menu. Update the app. Also check that you tapped the layer's thumbnail on an already active layer, not the layer name or the visibility checkbox.
Brush strokes don't appear. You have an active selection masking your canvas. Tap the Selection tool and clear it.
Fill bleeds outside the lines. That's an edge-quality issue, not a selection error. Use Alpha Lock on a duplicate layer, or add a slight Feather before filling.
Taking Procreate Line Art Into a Motion Pipeline
For motion designers and animators, Procreate is usually where the drawing happens, not where it ends. A few habits make the handoff to After Effects, Nuke, or Blender smoother:
- Keep line art on isolated transparent layers. The same cleanliness that makes Select work reliably also makes your export predictable.
- Export as PSD to preserve layers. After Effects imports Procreate PSDs as layered compositions, so you can animate lines, fills, and textures separately. Export PNG for flat, transparent single frames.
- Use Animation Assist for frame-by-frame work. Procreate can export animated sequences, and PNG sequences give you the most flexibility to relink and retime in a compositing app.
- Name your layers. After Effects will preserve them, and a layer called "lines_final" saves you a lot of guessing later.
Where Styleframe Fits
Once you have clean line art or key drawings from Procreate, Styleframe is a useful next step if you want to extend them into motion without giving up control. It's an AI video and motion tool built around reference-driven work rather than one-click output. Every generation is steered by your own images, clips, and keyframes.
A few practical examples:
- Frames-to-Video: Use keyframes from your Procreate drawings as the start and end points, and generate the motion between them.
- Restyle and Ink-and-Paint: Apply the look of a reference image or clip, such as your own ink-and-paint treatment, to other footage or frames so the style stays consistent with your drawn work.
- 2D-to-3D and Turntable: Turn a character or prop design into a 3D-style asset and generate a turntable to check it from other angles.
- Remove Background and 4K Upscale: Clean up cutouts and bring output to production-ready 4K.
Iteration is non-destructive, so you can revisit and adjust a generation without losing earlier results. Output comes out as image sequences, which fits straight into an After Effects or Nuke comp, and an After Effects plugin is on the way. You keep your compositing workflow and add generation where it saves time, not as a replacement for your drawing skills.
FAQ
Can I select all lines in the whole document at once? Not with a single command. Select works per layer, so group and duplicate-flatten the layers first if you need one combined selection.
Does Select include transparent pixels? No. It selects non-transparent pixels, including partially transparent edge pixels.
Is Alpha Lock the same as Select? No. Alpha Lock restricts painting to existing pixels on the layer. Select creates a real selection you can feather, invert, copy, or fill.
Will this work on Procreate Pocket? The layer menu and Alpha Lock work similarly on iPhone, though the interface is more compact. Confirm the options in your installed version.
What's the quickest way to recolor line art? Alpha Lock plus a fill, done on a duplicate layer so the original stays safe.