How to Select a Section in Procreate
StyleFrame Team6 min read
To select a section in Procreate, tap the Selection tool (the S-shaped icon in the top toolbar), pick a mode (Automatic, Freehand, Rectangle, or Ellipse), then tap or draw over the area you want. Selections apply only to the active layer, so choose the right layer first. Once the selection is committed, you can move, copy, cut, recolor, fill, or paint inside it without touching the rest of the artwork.
Where the Selection Tool Is and How It Works
Open a canvas and look at the top toolbar. The Selection tool is the S icon at the top left of the screen. Tap it and the Selection toolbar appears with the four modes, plus Add, Remove, Invert, and Copy & Paste.
Two things are worth knowing before you start:
- Selections live on one layer at a time. If you select an area while the wrong layer is active, you'll move or erase the wrong pixels.
- The canvas shows what's selected. In Automatic mode, the selection appears in inverted colors. Once you tap another tool, the selection is committed and semi-transparent moving diagonal lines appear outside the selected area.
To exit without editing anything, tap the Selection tool again. This cancels the selection.
The Four Selection Modes
Each mode suits a different kind of artwork, and you can combine them in a single selection.
Automatic
Automatic mode selects areas of similar color or tone with one tap. It's the fastest way to isolate a flat-color shape, a sky, or a background fill.
- Tap the Selection tool, then tap Automatic.
- Tap the area you want.
- Keep your finger down and drag left or right to change the threshold. Dragging right grows the selection into neighboring tones, and dragging left tightens it.
The threshold is the part people most often get wrong. Drag too far and the selection spills into adjacent areas, so nudge it slowly and watch the edges. Automatic works best on clean, high-contrast linework or flat color. On textured brushwork or soft gradients it can give ragged results, so refine it afterward with Freehand.
Freehand
Freehand is the mode closest to drawing. Trace around the area with your Apple Pencil or finger, then close the loop to fill the selection.
- Drag to create curves.
- Lift and tap from point to point to create straight segments.
- Close the shape by returning to your starting point.
This is the right mode for characters, organic forms, and anything that doesn't follow a geometric outline. It's slower than Automatic, but you control exactly where the edge falls.
Rectangle
Drag across the canvas to define a rectangular area. It's useful for selecting panels, cropping a region for a copy, or grabbing a block of a layer to move.
Ellipse
Ellipse works like Rectangle but produces circles and ovals. Drag diagonally from one corner of an imaginary bounding box to the opposite corner. It suits eyes, wheels, highlights, and vignette-style masks.
Refining a Selection
Your first pass is rarely exact. Procreate gives you several ways to adjust it.
Add and Remove
The Add and Remove buttons control what happens when you draw or tap again. With Add active, new shapes expand the selection. With Remove active, they subtract from it. You can switch modes between passes: select a large region with Automatic, then switch to Freehand and Remove to clean up the edges.
Invert
Tap Invert to flip the selection, so everything that was unselected becomes selected. This is a quick way to isolate a subject. Select the simple background with Automatic, then invert to get the figure.
What You Can Do With a Selected Section
Once the selection is active, tap another tool to commit it. From there:
- Paint, smudge, or erase inside the selection. Strokes are clipped to the selected area, which gives you clean edges without masking by hand.
- Fill with color. Use ColorDrop to drop a color into the selection.
- Apply adjustments. Tap the Adjustments menu to change hue, saturation, or apply other effects to only that section.
- Transform. Tap the arrow (Transform) tool to move or transform the selection.
- Copy and paste. Swipe down with three fingers to open the Copy & Paste menu, or tap the Copy & Paste button in the selection toolbar. Choosing Cut & Paste moves the selected pixels onto a new layer and removes them from the original. Copy & Paste does the same without removing the original.
The cut-and-paste step is the one most worth building into your habits. If you drew two elements on the same layer by mistake, select one, use Cut & Paste, and you have two independent layers without redrawing anything.
Finding the Right Layer
If you have many layers and can't find the one holding a certain detail, set up Layer Select. Go to Actions > Prefs > Gesture Controls > Layer Select and assign a gesture, such as touch or a modifier plus touch. Then tap an object on the canvas and Procreate shows the layer or layers beneath your finger, so you can jump to the right one. This saves time in files with dozens of layers because you don't have to hunt through the panel.
Common Problems and Fixes
The selection grabs too much or too little. If you're in Automatic mode, adjust the threshold by dragging after the tap. If the edges are noisy, switch to Freehand with Add or Remove to correct them.
Nothing happens when you edit. Check that you're on the correct layer, and that the layer isn't locked. Selections on an empty layer have nothing to act on.
The selection disappeared. Tapping the Selection tool again cancels the selection.
Edges look harsh after a fill or adjustment. Use a soft brush inside the selection.
Automatic selects the wrong region on a sketchy drawing. Gaps in linework let the selection leak. Close the gaps on a separate layer, or use Freehand instead.
Taking Selections Into a Motion Pipeline
For motion designers, animators, and VFX artists, Procreate selections are often a quick way to prepare 2D assets: separating a character from a background, isolating props, or cutting a painted style frame into layers. A practical workflow looks like this:
- Use Automatic or Freehand to select each element.
- Use Cut & Paste to place each element on its own layer.
- Export the layers, or export the full artwork for use as a reference.
- Bring those assets into After Effects, Nuke, or Blender for compositing and animation.
This is also a natural point to bring in an AI video tool where artistic control matters. is an AI video tool built for reference-driven work, so your Procreate frames can serve as references. Procreate handles the hand-drawn selections and layer separation, and your compositing tools handle the final assembly.
Quick Reference
Final Tips
Start with the fastest mode that gets you close, then refine with Add and Remove. Work on the correct layer, and use Cut & Paste whenever you want a section to become an independent layer. Those habits will carry over into any pipeline that needs clean, separated 2D assets.