How to Select 2 Brushes in Procreate
StyleFrame Team7 min read
To select two brushes in Procreate, tap the first brush in the Brush Library so it turns bright blue, then swipe right across a second brush in the same set. The first becomes the Primary brush, the second becomes the Secondary, and a Combine button appears at the top right of the library. Tap it to merge both into one Dual Brush that carries the shape and grain of each. The same select-then-swipe gesture also lets you pick several brushes to move or delete at once.
Step-by-step: select two brushes and combine them
The selection gesture is the part people most often get wrong, so here it is in order.
- Open the Brush Library. Tap the Paint, Smudge, or Erase button in the top toolbar. Combining works with any of the three.
- Go to the right brush set. Both brushes must live in the same set. If they don't, drag one into the other's set first.
- Tap the first brush once. It highlights bright blue and becomes the Primary brush.
- Swipe right across the second brush. Put your finger or Apple Pencil on its thumbnail and slide sideways, the same motion you use to switch home screens or multi-select layers. The second brush turns a darker or more muted blue, which marks it as Secondary.
- Tap Combine. The "+" at the top of the library is replaced by Combine and Delete once two brushes are selected. Tapping Combine produces a single new brush.
The new brush takes the name of the Primary brush. To rename it, press and hold it and choose Rename, or open Brush Studio and use the About this Brush panel.
Rules that stop the Combine button from appearing
If Combine never shows up, one of these conditions is almost always the cause.
- Both brushes must be in the same set. Procreate won't merge brushes across sets.
- Only single brushes can be combined. An existing Dual Brush can't be used as an input.
- Default brushes are allowed in recent versions. Since Procreate 5.4 you can combine stock brushes as long as they aren't already Dual Brushes. On older versions you had to duplicate a default brush and combine the copy.
- You need to select, not drag. Dragging one brush onto another only reorders the library. This is a misunderstanding that shows up in user forums: people try to "drop" one brush into the other, the thumbnail bounces back, and a small plus icon, which just indicates a move, makes it look like something should happen. Nothing gets dropped. You select both, then press a button.
Why you should duplicate first
Combining converts the pair into one brush. The originals don't stay behind as separate entries, so if you want to keep your source brushes intact, duplicate them before you start. Swipe left on a brush thumbnail and choose Duplicate, then move the copies into a dedicated set, for example one called "Combined" or "Experiments".
Working in a scratch set has two practical benefits:
- Your production brushes stay untouched, which matters if you share a brush library across projects or machines.
- Every combination has a clear home, so you can compare variants quickly.
If you do combine the originals and regret it, you can uncombine, covered below.
Primary versus Secondary: order matters
The brush you tap first is not interchangeable with the one you swipe second. Procreate treats the Primary as the lead and layers the Secondary's qualities onto it. Selecting a wet gouache brush first and a dry crayon brush second gives a different result than the reverse. Beyond the stroke behavior, the Primary also supplies the name.
If the result looks wrong, don't assume the pair is a bad match. Uncombine and try the opposite order before discarding the idea.
Edit each brush inside a Dual Brush
Once combined, tap the new brush to open Brush Studio. In the top left you'll see previews of both component brushes.
- Tap one preview to select it. A blue line appears beside the active brush, and every setting you change applies only to that one. You can adjust shape, grain, dynamics, and the other Brush Studio tabs independently for each half.
- Use the Drawing Pad on the right to test strokes live. Clear it with a three-finger scrub.
- Rename and set a reset point under About this Brush so you can return to a known state.
Combine Mode
Tap either preview to expand the panel and you'll find Combine Mode. It defaults to Normal. Changing it affects how the two brushes interact, much like changing a layer's blend mode in Procreate changes how two layers mix together. Tap through the list and the Drawing Pad updates live, so you can audition modes in seconds.
If you're used to how Normal behaved in older versions of Dual Brush, there is a toggle at the bottom of the Rendering tab in Brush Studio that you can try.
Uncombine a Dual Brush
To split a Dual Brush back into its two components, open it in Brush Studio, tap the Secondary Brush preview, and tap Uncombine. Confirm the prompt and you get two separate brushes again. This makes experimentation low-risk, but keep a duplicate if you want pristine originals.
Selecting multiple brushes for other tasks
The same swipe-to-select gesture handles more than combining. If you've imported a pack and everything has landed in the Imported set, you can reorganize in bulk.
Method one:
- Tap one brush to select it.
- Swipe right across each additional brush you want. They highlight in a lighter blue.
- Press and hold any highlighted brush and lift. The rest gather into a single draggable stack.
Method two:
- Press and hold one brush and lift it slightly.
- While holding, tap other brushes. They join the stack.
With the stack held in one hand, scroll the set list with the other and tap the destination set to open it, then drop the brushes in. Hovering the stack over a set name until it flickers and opens works too.
Two limitations to know about:
- Brush sets can be multi-selected and reordered, by pressing and holding one, dragging it out, and tapping others. But you can't nest sets inside other sets, and dropping sets "into" a set just puts them back in the list.
- The gesture is finicky. Some users report mis-selections when working with long lists. Collapse the set list or work in a shorter set if you keep catching the wrong thumbnails.
Practical tips for building usable Dual Brushes
- Pair opposites. A hard, grainy brush with a soft, wet one produces character that neither delivers alone.
- Change one variable at a time. Adjust one half's size or grain, test, then move on. Two-brush settings can get confusing fast.
- Name variants clearly. Because the combined brush inherits the Primary's name, add a suffix like "_crayon" or "_v2" so you can tell them apart in the library.
- Test on a texture-heavy sample, not just a straight line. Grain interaction shows up in overlapping strokes and curves.
Where custom Procreate brushes fit in a motion pipeline
Motion designers, animators, and VFX artists often reach for Procreate to build style frames, hand-drawn textures, and look-development references before work moves into After Effects, Cinema 4D, Blender, or Nuke. Dual Brushes are useful here because they let you develop a distinct, repeatable mark-making style, such as dry-brush edges, grainy fills, or chalky outlines, that doesn't look like a default preset.
Quick troubleshooting checklist
- No Combine button? Make sure exactly two brushes are highlighted and that you swiped rather than dragged.
- Second brush won't highlight? Swipe right, horizontally, across its thumbnail. Tap first, then swipe.
- Brushes bounce back when you try to merge? You're moving them, not selecting them. Release and use the tap-then-swipe gesture.
- Brushes won't combine at all? Check that both are in the same set and that neither is already a Dual Brush.
- Result looks off? Swap the Primary and Secondary order, or cycle through Combine Modes.
- Want the originals back? Uncombine, or restore from the duplicates you made beforehand.
Summary
Selecting two brushes in Procreate takes one tap and one swipe: tap for Primary, swipe right for Secondary, then press Combine. Keep both brushes in the same set, duplicate them first, and remember that order changes the result. From there, Brush Studio lets you tune each half and the Combine Mode, and Uncombine reverses it if you want to start over.