How to Screen Print a Procreate Art
StyleFrame Team6 min read
To screen print Procreate art, build your design at the final print size and 300 PPI, split it into one flat-color layer per ink, and export each layer as a black positive. Then print the positives onto film, burn one screen per color, register the screens, and pull each ink with a squeegee. Procreate cannot split an image into color channels automatically, so you draw the separations yourself or hand clean layered files to a print shop that handles the screens.
Decide How You'll Print Before You Draw
The easiest Procreate files to print are spot-color designs. Each ink gets its own layer, and overlaps create extra colors. Three inks that overlap can give you seven colors, which is why limited palettes work so well for screen printing.
Full-color illustrations are harder. They need process separation (cyan, magenta, yellow, black) or halftone conversion. Some artists use a Procreate add-on such as RetroSupply's ColorLab, which pairs color-specific brushes with dedicated layers so the separations are built in as you paint. You can also do it by hand. Pick your approach first, because it affects how you structure layers from the first stroke.
Step 1: Set Up the Canvas for Print
Create the canvas at the real dimensions of the print, not "Screen Size." If the poster is 12" × 16", make the canvas 12" × 16".
- Resolution: 300 PPI or higher at final size. Line work holds up better at higher resolution, and it prevents jagged edges when the film is output.
- Color profile: RGB (sRGB or Display P3) is fine for most workflows. Because you'll convert artwork to flat black positives, the on-screen color matters less than the separations. Use CMYK only if your printer specifically asks for it.
- Bleed: Add about 1/8" on every side if the print will be trimmed.
- Working space: Leave margin outside the artwork for registration marks and a printer's notes.
Dial your iPad brightness down while you work. A full-brightness display flatters colors, and you'll be disappointed when the ink dries.
Step 2: Build the Separations
Procreate has no one-click channel separation, so the reliable method is to draw each ink on its own layer.
- Sketch on a reference layer. Lock it or drop its opacity. You'll hide it before export.
- Create one layer per ink color. Name them by ink: "Black," "Red," "Teal," "Cream." Plan the print order. Lighter inks usually go down first, with the darkest or key line layer last.
- Use solid, hard-edged shapes. Soft airbrushes and low-opacity strokes don't burn cleanly on a screen. If you need tone, convert it deliberately with halftone dots or a texture brush that produces solid marks.
- Plan overlaps. Where two colors touch, a small overlap, called a trap, hides small registration errors. Let the lighter color extend slightly underneath the darker one.
- Use blend modes only for previewing. Multiply on your color layers shows how transparent inks will mix. It does not affect the exported positives.
Handle Gradients and Texture Intentionally
Gradients need halftoning, which converts tones into dots. Pick a dot size that suits your mesh count, since fine dots on a coarse screen will fill in. Grain and distress textures should be made from solid black marks at full density, not gray.
Step 3: Add Registration Marks
Registration marks let you align each screen to the previous color. Draw simple crosshairs or targets on a separate layer in all four corners, or at least two opposite corners, outside the artwork area. Duplicate that layer into every separation so the marks appear on every film. If they don't match perfectly across layers, your screens won't line up.
Step 4: Export Positives
Each ink needs its own black-and-white positive. For every separation:
- Hide all layers except that ink's layer and the registration marks.
- Make the artwork pure black. Recolor it if the layer isn't already black.
- Put a white background under it, or export with transparency, depending on what your film-output workflow expects.
- Export as PNG or PDF through Actions > Share, and name each file by ink and print order (for example, "01_cream.png").
Print each file at 100% scale onto inkjet transparency film or have a print shop output film. The black needs to be dense and opaque. If light passes through it, the emulsion won't harden correctly where it shouldn't.
Once you have positives, you can stop here. Many print shops will take separated files and handle screens, ink matching, and pulls. Send them the individual positives, a flattened color mockup, the ink colors you want (Pantone references work well), paper or garment details, and the final print dimensions.
Step 5: Burn the Screens
If you're doing the printing yourself:
- Coat a clean, degreased screen with photo emulsion and let it dry in the dark.
- Place the positive on the screen, ink side against the mesh, and weigh it flat with glass.
- Expose to UV light. Times vary a lot depending on emulsion, mesh, and light source, so run an exposure test first.
- Rinse the screen with water. The unexposed emulsion, under the black areas of your film, washes away and leaves an open stencil.
- Dry the screen and block any pinholes or gaps with tape or screen filler.
Choose mesh to match the artwork. Fine detail and halftones need higher mesh counts, while bold flat shapes are fine on lower ones.
Step 6: Register and Print
Registration is where most home printing goes wrong.
- Mount the first screen in hinge clamps on a flat base. Set the paper position with tape tabs or guides so every sheet lands in the same spot.
- Print the first color. Flood the screen with ink, then pull the squeegee with even pressure and angle.
- Let the sheet dry or cure as the ink requires. Water-based inks on paper dry fast. Plastisol on garments needs heat curing.
- Mount the next screen and align its registration marks against a print of the first color, adjusting until the marks overlap precisely. Then lock it down.
- Repeat for each color. Print a few test sheets on scrap paper before using your good stock, since the first pulls often need corrections.
Use heavy stock, such as 100 lb card stock or higher, so the paper survives multiple passes without warping.
Common Mistakes to Avoid
- Drawing at screen resolution. Low-resolution files produce soft edges on film.
- Leaving gray tones. Gray areas turn into weak, unpredictable stencils.
- Skipping traps. Perfectly butted shapes show white gaps with any shift.
- Mismatched marks. If registration marks drift between layers, nothing aligns.
- Not testing. Always run an exposure test and a scrap print.
Final Checklist
Before you burn screens or send files, confirm:
- Canvas matches the final print size at 300 PPI or higher.
- Each ink is on its own layer, in solid black on its exported positive.
- Registration marks appear identically on every separation.
- Overlaps and traps are included where colors meet.
- Film output is fully opaque and printed at 100% scale.
- You've tested exposure and printed on scrap stock first.
Procreate gives you a fast, flexible space for designing the art. Success in screen printing comes from disciplined separations, accurate registration, and testing before the final run.