How to Scan Wayercolors Into Procreate to Edit
StyleFrame Team8 min read
To scan watercolors into Procreate, scan the painting flat at 300 DPI or higher, move the file to your iPad, then import it through Actions > Add > Insert a file or Insert a photo. Once it's on a layer, set the blend mode to Multiply or use selections to remove the paper, then correct color and fix mistakes on separate layers. For motion work, export a transparent PNG or layered PSD that drops straight into After Effects.
What you need before you start
- The painting: Dry, flat, and free of buckled paper. Cockled paper casts shadows in a scanner and creates uneven lighting.
- A flatbed scanner or a camera: A flatbed gives the most even, repeatable capture. A phone or DSLR works if you control the light.
- An iPad with Procreate: Procreate is a one-time purchase, not a subscription.
- A way to move files: AirDrop, iCloud Drive, or a cable. Any of them is fine.
If you're pulling scans into a motion project, plan for the end use now. Scan larger than your delivery resolution so you can scale, push in, or parallax the artwork without it going soft.
Scanning vs. photographing watercolors
Both methods work, but they fail in different ways.
Scanning
A flatbed scanner gives you flat, evenly lit, repeatable captures, which makes it the easiest way to get consistent color across a batch of paintings. The downside is that it picks up the paper's texture and can exaggerate the grain in light washes. That texture is often exactly what you want for a hand-made look in a motion piece, so don't assume you need to remove it.
Practical settings:
- Resolution: At least 300 DPI. Go higher for small paintings you'll enlarge or for anything headed to high-resolution frames.
- Mode: Color, not "photo enhance" or auto-correct modes that shift saturation.
- Format: TIFF or high-quality PNG if available. Avoid heavy JPEG compression, which creates blocky artifacts in soft gradients.
- Large paintings: Scan in sections with overlap and stitch them later. Keep the paper aligned to the scanner glass so the sections match.
Photographing
If you don't have a scanner, a camera can work, but lighting is everything. Watercolor paper is textured, so a single hard light source rakes across the surface and exposes every bump as a shadow. Use soft, even, indirect light, such as a bright window on an overcast day, and shoot straight down with the lens parallel to the paper. A white board bounced opposite the window helps even things out. Avoid overexposing, because blown-out whites in pale washes can't be recovered.
Shadows and paper bumps matter more than you'd think when you later erase the background. The more texture and uneven light in the capture, the more obvious the cutoff edge will be.
Step 1: Get the scan onto your iPad
Transfer the file by AirDrop, iCloud Drive, or a shared cloud folder. AirDrop is the quickest from a Mac. Keep the original scan untouched somewhere safe so you can always return to it.
If you'd rather skip the computer, you can capture directly on the iPad using Procreate's camera option. That's convenient, but it won't match a flatbed for flatness and color consistency.
Step 2: Set up the canvas and import the artwork
- Create a new canvas in Procreate. Match the pixel dimensions of your scan, or choose a size that fits your delivery target. Very large canvases can mean fewer layers.
- Open Actions (wrench icon) > Add > Insert a file (for a scan saved in Files) or Insert a photo (for something in your Photos library).
- Position and scale the image to fill the canvas. Tap the Transform tool if you need to adjust.
- Consider the canvas color profile. Procreate lets you choose RGB profiles when you create a canvas, and picking one that matches your After Effects project color space (typically sRGB) avoids surprises when the artwork lands in your comp.
Step 3: Remove or tame the paper background
You have a few options, and the right one depends on how the artwork will be used.
Option A: Multiply blend mode (fastest)
Set the scan layer's blend mode to Multiply. White paper effectively drops out when it sits over a lighter layer or background, while the pigment stays. This is great for layering color washes over other artwork, but it isn't true transparency. If you export with a transparent background, it won't give you a clean alpha.
Option B: Selection and erase (true transparency)
Use the Selection tool in Automatic mode and tap the paper area, adjusting the threshold by dragging until the white is selected. Invert the selection or delete the paper area, then soften the edge with a small feather if needed. This works best on paintings with strong contrast between pigment and paper. Pale, delicate washes are harder because the edge between "paint" and "paper" isn't clear.
Option C: Brighten the paper first, then select
Use Adjustments > Curves (or Levels-style tweaks) to push the paper toward white without clipping the paint. A cleaner, whiter paper makes the automatic selection far more reliable. Do this on a duplicated layer so the original stays intact.
If your painting has color edge to edge, there's no paper to remove, and cleanup is mostly about fixing blemishes and uneven edges.
Step 4: Edit and fix mistakes non-destructively
Procreate's layers let you fix problems without touching the scan.
- Duplicate the scan layer before every major change. Keep the original hidden at the bottom.
- Fix blotches and bleeds: Create a new layer above the scan and paint over problem areas with a soft brush, sampling nearby colors with the Eyedropper (touch and hold). For watercolor-like fixes, use brushes with texture so patches don't look flat.
- Recolor: Use Adjustments > Hue, Saturation, Brightness or Color Balance on the layer. For selective changes, select the area first so the adjustment only applies there. Clipping masks are also useful for painting new color into existing shapes.
- Remove stray marks: Erase on a duplicate layer, or use a layer mask. Masks let you restore detail if you erase too much.
- Add digital detail: Draw line work or accents on separate layers above the scan so the watercolor texture stays pure.
Keep each fix on its own layer. Later, if an art director wants the blue less saturated or a shape moved, you aren't repainting anything.
Step 5: Export for your motion pipeline
How you export depends on where it's going.
- PNG with transparent background: Good for single flattened elements. Hide the background color layer in Procreate before exporting.
- PSD: Procreate can export layered PSD files, which preserve your layer structure so you can import them into After Effects as a composition with separate layers. Watch blend modes, since some may not translate exactly.
- TIFF or high-quality PNG: Useful when you want a lossless flat image.
- Separate elements: Export individual layers (such as washes, details, and line work) as separate PNGs when you want to animate them independently, like parallax, reveals, or boiling effects.
In After Effects, check the footage interpretation. Make sure alpha is interpreted as straight or premultiplied correctly, or you'll get dark or light fringes around edges. If you used Multiply in Procreate, either bake it into a flat image or recreate the Multiply blend mode in your comp.
Where Styleframe fits after the scan
Once your watercolor is clean, the artwork becomes source material for motion rather than a finished piece. is an AI video and motion tool that can pick up where Procreate leaves off.
Practical ways to use your scanned watercolors:
- Restyle and Ink-and-Paint: Use your cleaned watercolor as a style reference to apply that look to footage or animation, so the painting's palette and brushwork guide the result.
- Frames-to-Video: Set keyframes using your painted frames, such as a start and end illustration, and let the motion between them be guided by those frames.
- Remove Background: Isolate subjects when the paper cutout in Procreate isn't clean enough.
Check Styleframe's current feature list and export options to see how its results fit your compositing workflow. You keep your existing pipeline and use the tool for the generative step, not as a replacement for compositing.
Common problems and fixes
The scan looks washed out. Disable auto-enhancement on the scanner, scan at a higher bit depth if available, and adjust Curves in Procreate rather than relying on the scanner's correction.
Colors look different on the iPad. Check the canvas color profile and compare against the physical painting in neutral light. A calibrated monitor helps for final decisions.
Paper texture makes the cutout ragged. Brighten the paper with Curves first, use a gentler selection threshold, or leave the texture in and use Multiply instead of a hard cutout.
White edges show up in After Effects. That's usually a matte or premultiplication issue. Re-check alpha interpretation, or expand the artwork slightly beyond the cutout edge.
The canvas is too big and layers are limited. Reduce the canvas size, flatten finished groups, or split the project into sections.
Quick workflow summary
- Scan flat at 300 DPI or higher, or photograph in soft, even light.
- Move the file to your iPad and keep the original untouched.
- Create a canvas that matches your scan and insert the file.
- Remove the paper with Multiply or a selection, brightening with Curves first if needed.
- Fix mistakes and recolor on separate layers.
- Export a PNG, TIFF, or layered PSD for After Effects.
- Use the cleaned artwork as reference or keyframes for style transfer and animation.
Done well, the scan-and-clean pass can be a quick step per piece, and it leaves you with high-quality, editable source art you can animate, restyle, and composite however the project demands.