How to Scan Drawings Into Procreate
StyleFrame Team8 min read
To scan drawings into Procreate, digitize the page with a flatbed scanner or a well-lit, flat phone photo, then bring it in through Actions → Add → Insert a photo (or Insert a file). Set the layer's blend mode to Multiply so the paper disappears and only the linework remains, then boost contrast with Curves. For a cleaner result, use Procreate's layer mask trick to separate the lines from the background, so you can recolor or recomposite them without retracing.
What You Need Before You Start
The process is simple, but the quality of your source file decides how much cleanup you'll do later. Gather these first:
- Your drawing on paper, ideally inked or drawn in dark graphite on light paper.
- A capture device: a flatbed scanner, a phone, or the iPad camera.
- An iPad with Procreate installed. If you scanned on another device, you'll need to move the scan over, for example by AirDrop.
- A target use. Knowing whether the art is headed for print, an animation, or a composite in After Effects determines your resolution and export format.
Step 1: Capture a Clean Scan
Flatbed scanner (best quality)
A flatbed gives you even lighting, no perspective distortion, and a predictable resolution. Scan at 300 DPI as a baseline. If you plan to crop in tight or scale the art up in a comp, scan at 600 DPI. Save as PNG or TIFF rather than JPEG to avoid compression artifacts around thin lines.
Turn off any automatic "enhance," "descreen," or "dust removal" options. You want the raw tonal range so you can control contrast yourself in Procreate.
Phone or iPad camera (fastest)
You can skip the scanner entirely. To get a usable photo:
- Place the page on a flat surface under diffused, even light. Avoid a desk lamp at an angle, which creates gradients across the paper.
- Shoot straight down so the page is square to the lens. Any tilt creates keystone distortion that will make registration painful later.
- Fill the frame with the page, but leave a small margin.
- Use a document-scanning app if you want automatic perspective correction and cropping.
Move the file to your iPad
If you scanned on a computer or phone, AirDrop the file to your iPad and save it to your Photos app. Photos you'll import with Insert a photo should be in your Photos library. Other files can be imported with Insert a file.
Step 2: Set Up the Canvas
Create the canvas first, then bring in the scan. This gives you control over the final pixel dimensions instead of inheriting whatever the scan happens to be.
- In Procreate, tap + to create a new canvas.
- For general work, 3000 × 3000 px at 300 DPI is a solid default for prints and resizing. For video or motion work, match your composition instead, for example 3840 × 2160 for UHD or 1920 × 1080 for HD.
If your art is landscape and your comp is 16:9, size the canvas to 16:9 now. Cropping later will cost you resolution and force you to redo placement.
Step 3: Import the Scan
- Tap the wrench icon (Actions).
- Choose Add → Insert a photo (or Insert a file for PNG and TIFF files).
- Select your scan.
- Use the Transform tool to scale and rotate it so it fits the canvas. Make all your adjustments in one pass before committing, since repeated resampling softens thin lines.
Name the layer something like "scan_original" so you can always return to it.
Step 4: Clean Up Contrast
Paper is never truly white, and pencil or ink is never truly black. Fix that before anything else.
Use Curves
Tap the Adjustments (magic wand) icon and choose Curves. Gently pull the curve points to deepen the contrast and remove paper texture. Work gently. Pushing too far destroys the thin, light edges of pencil strokes and makes ink lines look jagged.
Use Hue, Saturation, Brightness
For a quick pass, slightly increase saturation and brightness to brighten the whites and darken the blacks. Tap the canvas and choose Apply to commit the changes.
Snap to pure black and white
In the color panel, double-tap near the outer rim of the color disc to snap to pure black or pure white. This makes it easy to patch missed spots with a flat monoline brush.
Step 5: Separate the Linework from the Paper
This is the step that makes a scan useful. Right now your drawing and the paper are one flattened image. You want the lines alone so you can color underneath, swap backgrounds, or composite in other software.
Option A: Multiply blend mode (fastest)
- Tap the N next to your scan layer.
- Change the blend mode to Multiply.
- Create a new layer below the scan and fill or paint on it.
Multiply makes white transparent in effect, so the layer beneath shows through while the dark lines stay put. It works best when your scan is high contrast with a near-white background. If the paper is grainy or off-white, raise contrast with Curves first.
The catch: Multiply only changes how the layer looks. The paper pixels are still there, so exporting a transparent PNG won't give you a clean alpha.
Option B: Mask method (true separation)
This approach turns the lines into real transparency:
- Tap the scan layer and choose Mask to add a layer mask.
- Tap the original scan layer and choose Copy.
- Select the mask, then swipe down with three fingers and choose Paste so the black-and-white image lands in the mask.
- Tap the mask and choose Invert if the lines have disappeared instead of the paper.
Now the paper is hidden and the lines are visible. Because it's an actual mask, you can lock the layer's alpha (or use Alpha Lock) and recolor the linework, and you can export the art with a transparent background.
Step 6: Clean Up and Redraw
With the lines isolated, tidy the drawing:
- Use a textureless monoline brush to close gaps and fix broken strokes.
- Paint over stray marks with white on the mask, or erase them directly.
- Use Selection in Freehand mode to move, duplicate, or fix individual elements.
- Add flat color on layers below the lines, using Color Drop or manual fills. Keep each color region on its own layer if you plan to animate or composite them separately.
Keep your original scan layer hidden but intact, so you can always revert.
Scanning for Animation: Keep Registration Consistent
If you're digitizing a sequence of drawings for an animated shot, consistency matters more than perfection on any one frame.
- Use the same scanner settings for every page.
- Use registration marks or a peg bar on your paper so every drawing lands in the same position.
- Scan every page at the same resolution and in the same orientation.
- Import each drawing into Procreate at the same scale and position, then use Animation Assist if you want to preview timing on the iPad.
Small shifts between frames create jitter that is time-consuming to fix once the frames are in a compositing app.
Exporting from Procreate to After Effects and Other Tools
Once the art is clean, how you export depends on where it's going:
- PNG with transparency: Hide any background layer, then use Actions → Share → PNG. Good for single pieces of artwork or elements to drop into After Effects, Premiere Pro, or Nuke.
- PSD: Preserves layers so you can bring separated line, color, and background layers into After Effects. Check that blend modes carried over as expected, since some Procreate modes may not translate exactly.
- Animated PNG, GIF, or MP4: Available from the animation export options if you've used Animation Assist.
- PNG sequences: Export frame sequences when you need frame-accurate handoff to a compositor.
Before importing, check the document's color profile. If your After Effects project is color-managed in another space, make sure you assign or convert the profile correctly.
Where Styleframe Fits After the Scan
Scanning into Procreate gets your drawings clean and layered. Turning them into moving, styled footage is a different job, and that's where Styleframe can be useful as a downstream step in a professional pipeline.
As always, test on a few frames first to confirm the result matches your art direction before committing to a full sequence.
Common Problems and Quick Fixes
The paper still shows after Multiply. Increase contrast with Curves until the background is pure white, or use the mask method instead.
Lines look jagged after adjustments. You probably scanned at too low a resolution or pushed Curves too hard. Rescan at 600 DPI and make smaller adjustments.
The drawing is warped or slanted. Retake the photo with the camera straight above the page, or use a scanner.
Lines are too thin or too light to isolate. Darken them before masking by duplicating the scan layer and setting the duplicate to Multiply, which strengthens the strokes.
Color fills leak. Close gaps in the linework with a monoline brush before using Color Drop, or raise the Color Drop threshold carefully.
Final Checklist
- Scan flat and evenly lit, at 300 DPI or higher.
- Create the canvas at your final delivery dimensions.
- Import with Insert a photo or Insert a file, and scale in a single pass.
- Fix contrast with Curves.
- Separate lines using Multiply for coloring or the mask method for true transparency.
- Clean up lines on their own layer and keep the original scan hidden.
- Export as transparent PNG, layered PSD, or an image sequence for After Effects, Nuke, or your next tool.
A careful scan and a few minutes of contrast work will save hours later, especially when those drawings end up as animation frames, textures, or style references in a larger motion pipeline.