How to Reuse a Color in Procreate
StyleFrame Team8 min read
To reuse a color in Procreate, tap one of the swatches in the Color History row of the Color panel, which holds your last ten colors. For anything you'll need again, save it to a palette by tapping an empty swatch, or sample it from the canvas with the Eyedropper (touch and hold on the canvas by default). For exact matches across apps, copy the hex value from the Value tab.
Pick the right method for the job
Reuse a color from Color History
Open the Color panel and look at the History row. It shows the last ten colors you've selected, in the Disc, Classic, Harmony, and Value tabs. Tap a swatch and it becomes your active color.
Some details that save frustration:
- History is per artwork. A fresh canvas starts with an empty History, so it won't carry colors over from a different file.
- It's short-lived. Once you pick an eleventh color, the oldest one drops off. If you might need a color tomorrow, History is the wrong place for it.
- The reticle compares automatically. When you drag the secondary reticle on the color wheel, the split circle shows the color under the reticle beside your most recent History color. It's a fast way to check whether a new shade has drifted from the one you meant to reuse.
- Small iPads have a toggle. If your screen is compact, use the ellipsis button to switch the bottom of the panel between the active palette and Color History.
You can also see Color History at the top of your palettes in the Color Companion, in either Compact or Cards view. Tap Clear if you want to wipe it and start clean.
Save a color to a palette
Palettes are Procreate's real answer to "I want this color back later." They live in the app rather than in a single canvas, so they're available in every artwork.
- Choose the color you want, using any tab in the Color panel.
- Open the Palettes tab.
- Tap an empty swatch slot in the active palette to drop the current color into it.
- Next time, tap that swatch to make it active again.
A few habits make palettes work harder:
- Make one palette per project or client. Naming it after the job keeps brand colors separate from experiments.
- Set the active palette. The active palette appears at the bottom of the Disc, Classic, Harmony, and Value tabs, so your saved colors stay one tap away while you paint.
- Import palettes. Procreate lets you import palettes as well as create your own, which is useful when you want swatches that came from somewhere else.
- Remove swatches you've outgrown. A palette with 40 near-identical blues is no faster than hunting on the wheel.
Sample a color from the canvas with the Eyedropper
When the color you want is already in the artwork, you don't need to recreate it. Touch and hold on the canvas to bring up the Eyedropper, then drag over the area you want to sample and lift. The sampled color becomes your active color.
The Eyedropper is the right tool when:
- You need to extend a shape and keep the color identical.
- You're repairing an area after erasing or painting over something.
- You want to grab a mid-tone from a textured passage rather than guessing.
The gesture is configurable under Actions → Prefs → Gesture Controls, so if touch-and-hold doesn't work for you, check that setting. Keep in mind that sampling reads what's visible on the canvas, so blend modes, layer opacity, and adjustments affect the color you pick. If a sampled color looks slightly off from the original, that's usually the reason.
After sampling, tap an empty palette swatch right away if you'll need it again. Sampled colors enter History but won't stay there long.
Reuse a color by hex value
Sometimes a color has to match something outside Procreate: a brand spec, a motion graphics comp, a client's style guide. The Value tab shows numeric and hexadecimal values with precision sliders, which makes it the best place for exact matching.
Two workflows are worth knowing:
- Into Procreate: type or paste the hex code from your brief, then save that color to a palette so you never retype it.
- Out of Procreate: read the hex of a color you've painted and use it as the fill or swatch in After Effects, Cinema 4D, or Blender.
Be aware that color management differs between apps. A hex value that matches numerically can still look different if the document color profile, display profile, or project working space doesn't line up. If you're moving art into a compositing pipeline, check the profile on export and the working color space in your comp before judging a match by eye.
Reapply a color to existing artwork
"Reusing" a color sometimes means pushing it onto shapes that already exist. Procreate offers several routes, and each fits a different layer structure.
ColorDrop
Drag the color dot from the top right of the interface onto the area you want to fill. Keep holding and slide left or right to change the threshold, which controls how aggressively the fill spreads. Lift to commit. Sweep from the dot to the target rather than pausing on the dot, or it can switch to your previous color.
After a drop, tap Continue Filling to fill other areas with single taps, using the same color.
Recolor
Recolor is available through QuickMenu, which is off by default. Enable it under Actions → Prefs → Gesture Controls → QuickMenu, assign Recolor to one of the radial slots, and tap it to enter the mode. Then choose your color, tap the areas to fill, and adjust the Flood slider to control how far the fill spreads. Some versions show a crosshair you drag over the area to recolor, and the result updates live as you change the color. Confirm you're on the right layer first, because it's easy to recolor the wrong one.
Alpha Lock
If you want to turn an entire layer of linework or lettering to a new color, lock alpha on that layer (two-finger swipe right on the layer; a checkerboard thumbnail confirms it). Then paint over the layer with the new color. Only existing pixels accept paint, so the edges stay clean. This is the cleanest fix for the "black lettering to white" problem.
Selections → Color Fill
Turn on Color Fill in the Selections toolbar, choose a color, and make a selection. The selection fills as soon as you complete it. The setting persists after you leave Selections, so switch it off when you're done. It only works on a single layer, not a group.
Fill Layer
Pick your color, open Layers, tap the layer twice to open Layer Options, and choose Fill Layer. This floods the whole layer, which is handy for flat backgrounds or for building a solid base before masking.
Adjustments
For a global shift rather than an exact color, use Adjustments on the targeted layer: Hue, Saturation, Brightness, Color Balance, or Curves. This changes everything on that layer relative to what's there, so it won't give you a specific hex.
Build a palette from reference
If the color you want to reuse lives in a photograph, a frame grab, or a client's moodboard, you can generate a palette instead of sampling swatch by swatch. In the Palettes tab, create a new palette from a photo, camera, or file, and Procreate builds swatches from the image. Then refine: delete near-duplicates, and save any missing key colors manually.
This is a useful bridge for motion work. Export a still from your edit, build a palette from it, and you can paint matching boards or elements in Procreate that sit naturally with your footage.
Keep colors consistent in a motion pipeline
Procreate is often where motion designers sketch styleframes, character studies, and texture elements before moving into After Effects, Cinema 4D, Blender, or Nuke. Reusing colors consistently matters more there, because small shifts get multiplied across dozens of frames.
A practical approach:
- Create a project palette in Procreate and record the hex values for the key colors.
- Use those same hex values for solids, shape layers, and color corrections in your comp.
- Keep a flat swatch frame in your project so you can eyedrop against it later.
Common mistakes to avoid
- Relying on History for long jobs. It holds ten colors and resets per canvas. Save to a palette.
- Sampling from a layer with blend modes active. The picked color reflects the visible result, not the layer's raw pixels.
- Recoloring on the wrong layer. Check the layer selection before ColorDrop, Recolor, or Fill Layer.
- Leaving Color Fill on. It keeps filling every selection until you turn it off.
- Assuming hex equals visual match. Check color profiles when moving between apps.
FAQ
How many colors does Procreate's history keep? Ten. Newer selections push out the oldest ones.
Do palettes carry across artworks? Yes. Palettes are app-level, so any canvas can use them. History is the part that's per-artwork.
What's the fastest way to reuse a color I just painted with? Tap it in Color History, or touch and hold on the canvas to sample it.
Can I reuse a color from a photo? Yes. Create a palette from a photo or file, or sample the image directly if you've placed it on the canvas.