How to Resize Procreate
StyleFrame Team8 min read
To resize a Procreate canvas, open Actions (wrench icon) → Canvas → Crop and Resize, enter the new width, height, and DPI, and turn on Resample Canvas if you want the artwork to scale with it. To resize a single layer or selection, pick it with the Transform (arrow) tool, use Uniform mode, and drag. Every transform resamples pixels, so make the change once, start from a large source, and pick your interpolation setting first.
Canvas Resize vs. Layer Resize
Procreate has two separate operations that people call "resizing," and mixing them up causes most of the confusion.
- Canvas resize changes the pixel dimensions of the whole document. You can crop it, which adds or removes canvas area, or resample it, which scales all the content.
- Layer or selection resize uses the Transform tool to scale one element inside a canvas that stays the same size.
Procreate is a raster app. Making something larger means inventing pixels, and making it smaller means discarding them. How well the app does this depends on the source resolution, the interpolation method, and how many times you repeat the operation.
How to Resize the Canvas in Procreate
Use this when the document is the wrong size, for example a frame drawn at the wrong aspect ratio for your timeline.
- Tap the wrench icon to open Actions.
- Go to Canvas and tap Crop and Resize.
- Tap the dimension fields at the bottom to type exact values. You can switch units between pixels, inches, millimeters, and centimeters.
- Tap the chain/link icon between width and height to lock the aspect ratio. When it is highlighted, changing one value recalculates the other.
- Open Settings and switch on Resample Canvas if you want the existing artwork to scale to the new size. Leave it off to simply add or remove canvas area around artwork that stays at its current scale.
- Adjust DPI if needed, then tap Done.
If the link is active and you want to change aspect ratio, for example from square to 16:9, turn it off first. Otherwise your numbers will keep fighting each other.
Extra Controls Worth Knowing
- Drag handles: Pull the grid's corners or edges to crop visually, or drag the whole grid to reposition it.
- Rotation: You can rotate the canvas up to 45 degrees in either direction. Corners that fall outside the grid are cropped away.
- Snapping: Turn it on to snap the grid to segments of the canvas.
- Reset and Cancel: Reset reverts changes within the session, and Cancel exits without applying them.
Centering Artwork When You Enlarge the Canvas
There is no snap-to-center option in Crop and Resize. Say you want to grow a 2100 × 2100 canvas to 2400 × 2400 with an even margin. Build a Drawing Guide first:
- In Actions → Canvas, enable Drawing Guide and tap Edit Drawing Guide.
- Choose Symmetry, then activate the Quadrant option so two lines cross at the canvas center.
- Increase line thickness and change the color so the lines are easy to see, then tap Done.
- Open Crop and Resize, enter the new dimensions, and center the crop grid on the intersection of the guide lines.
It is not pixel-perfect the way a numeric offset would be, but it is close enough for most layouts.
How to Resize a Layer or Selection
For scaling elements inside the canvas:
- Select the layer, then tap the Transform (arrow) tool.
- Choose Uniform at the bottom so the proportions stay locked.
- Drag a corner handle to scale. Use the other modes (Freeform, Distort, Warp) only when you want to change the shape.
- Check the interpolation setting before you commit, as covered below.
- Tap the Transform tool again to apply.
Choosing an Interpolation Method
Interpolation tells Procreate how to calculate new pixels during a transform. The Transform menu offers three options:
- Nearest Neighbor samples the closest pixel. It is the fastest, keeps hard edges crisp, and can look blocky when you scale up.
- Bilinear averages a small neighborhood of pixels. The result is softer, with less edge definition.
- Bicubic samples a wider neighborhood and tends to give the smoothest gradients and soft edges.
Tutorials disagree on which setting gives the "best" result, and that is because the answer depends on the artwork. Crisp pixel-style art or hard-edged line work often holds up better with Nearest Neighbor. Painted textures, soft brushes, and gradients usually look better with Bicubic. The reliable method is to duplicate the layer a couple of times, apply a different method to each copy at the same scale, name the layers after the method, and compare at 100% zoom.
Procreate Dreams offers a narrower choice in its own canvas resample tool, only Nearest and Bilinear, with Bilinear as the default.
Resizing Canvases in Procreate Dreams
If you animate in Procreate Dreams, the path is slightly different. Enter the Drawing or Flipbook you want to change, then tap Settings → Canvas → Crop and resize. The tool has two modes under Settings:
- Crop removes or adds canvas area. You can type pixel dimensions, lock the ratio with the chain icon, drag the white bounding box, and hold the eye icon to preview the original. For a Flipbook, a time bar lets you scrub the timeline to see how the crop affects different frames.
- Resample scales all the content uniformly using interpolation, with the aspect ratio always locked. A Quality readout shows how your new dimensions compare to the original. In Procreate's own example, dropping a canvas to 8000 × 2500 pixels shows 50%.
Applying the change can take a while on large canvases or complex projects, so don't assume the app has frozen.
Keeping Quality When You Resize
Most blur complaints come from a small set of habits.
Start Big
Create the canvas at the largest size your device can handle comfortably. One popular tutorial recommends something like 3000 × 3000 px at 300 DPI for illustration, and for animation you should work at or above your delivery resolution. More source pixels means more room to scale down later without losing detail.
Resize Once
Each transform resamples the layer. Scaling a layer up, then down, then up again compounds the softness. Decide on the final size, apply it in one move, and do it before painting detail on top.
Don't Mistake Zoom for Blur
At very high zoom levels, any raster artwork looks soft or blocky. Pinch back to 100% to see how the file will actually look when exported.
Match DPI to the Use Case
DPI matters for print. For motion and video work, it is the pixel dimensions that count. A 1920 × 1080 canvas is 1920 × 1080 whatever its DPI tag says. Don't confuse the two when briefing a collaborator.
Duplicate Before Destructive Changes
Crop and Resize changes your canvas, so back it up first. Duplicate the canvas from the gallery and experiment on the copy.
Resizing for Motion and Compositing Pipelines
If your Procreate art is headed to After Effects, Premiere Pro, Nuke, Blender, or Cinema 4D, a few extra rules help.
- Set the canvas to your comp resolution or a clean multiple of it. Building at 3840 × 2160 for a 1080p timeline gives you room to push in, pan, or reframe without scaling past 100%.
- Export PNG for lossless output and transparency. Turn off the background color layer if you need an alpha channel.
- Keep layers separate when you plan to animate parts in your compositor. Export them individually or as a layered file rather than flattening everything.
- Check pixel aspect and color. Confirm the color profile before you export, so your comp doesn't shift on import.
- Avoid scaling up in the comp. If a layer sits at 150% in After Effects, you are doing the same interpolation Procreate would do, only with less control over the method. Fix the resolution at the source or upscale deliberately.
When the Source Is Too Small: Upscaling Instead of Stretching
Sometimes you inherit a small illustration or a low-resolution frame and need a 4K deliverable. Procreate's resample can only interpolate existing pixels, so it tends to look soft at large scale factors.
An AI upscaler is one option for artwork that can't be redrawn. It is not a substitute for drawing at the right size, and you should always inspect the result at full resolution.
Quick Troubleshooting
- Artwork looks blurry after resizing: Undo, switch interpolation, and apply the transform once. If the source was small, the problem is the source resolution rather than the setting.
- The canvas changed but the art didn't scale: Resample Canvas was off, so Procreate cropped or padded instead of scaling.
- The aspect ratio keeps changing: Check the chain icon and toggle it to match your intent.
- Edges look jagged on line art: Try Bilinear or Bicubic. If you want hard edges preserved, stay with Nearest Neighbor and scale in whole-number multiples where you can.
- Resize is slow or fails: Large canvases with many layers need memory. Merge layers you no longer need to edit, or reduce the target size.
Summary
For the canvas, use Actions → Canvas → Crop and Resize, with Resample Canvas on when you want the art to scale. For layers, use the Transform tool in Uniform mode and choose the interpolation method that suits your artwork. For quality, start large, resize once, and check at 100% zoom. If a project needs more resolution than the source can give, plan for it before you hand the work off to your motion pipeline.