How to Resize Drawing in Procreate
StyleFrame Team8 min read
To resize a drawing in Procreate, open the Actions menu (wrench icon), go to the Canvas tab, and tap Crop and Resize. Tap either dimension to type exact pixel values, and tap the link icon between them to keep the aspect ratio. To change the size of the artwork inside the canvas rather than the canvas itself, use the Transform (arrow) tool on a layer or selection.
"Resize" can mean three different things in Procreate, and each one uses a different tool. This guide covers all three, plus the settings that decide whether the result stays sharp enough for a motion or video pipeline.
Pick the right kind of resize first
Before you touch any controls, decide which of these you need:
- Change the canvas size without scaling the art. This is a crop or an expansion. Use Crop and Resize in crop mode.
- Scale the whole drawing up or down. Every layer is resampled to a new pixel count. Use Crop and Resize in resample mode.
- Scale one element inside the canvas. Use the Transform tool on a layer or selection.
Mixing these up is the most common cause of "my drawing got cropped instead of resized" and "my linework went soft."
How to resize the canvas with all layers
This is the answer most people are looking for, especially when a project was started on the wrong canvas size.
- Open the drawing and tap the wrench icon to open the Actions menu.
- Go to the Canvas tab.
- Tap Crop and Resize.
- Tap the width or height button at the bottom to bring up a number pad, then type your value.
- Tap the small link icon between the two fields if you want the aspect ratio preserved as you edit.
- Tap Done to apply.
Every layer comes along with the canvas, so you don't need to select or merge anything first. If the canvas was created in inches, the fields can show inches rather than pixels. For video work, switch your thinking to pixels so the result matches your comp.
Make a backup first. Duplicate the drawing in the gallery before you experiment. Cropping can discard pixels outside the new bounds, and a duplicate costs you nothing.
Changing aspect ratio on purpose
If you want to go from a square canvas to a 16:9 frame (or the reverse), make sure the link between the two dimension fields is switched off. With the link active, changing one value rewrites the other, so you can never reach a different ratio. Turn the link off, type both values, and then position the crop grid where you want it.
Centering the artwork when you expand the canvas
Crop and Resize has no snap-to-center option. If you're growing a 2100 × 2100 canvas to 2400 × 2400 and want equal margins on every side, a drawing guide gives you a reliable reference:
- Open Actions > Canvas > Drawing Guide, then choose Edit Drawing Guide.
- Select Symmetry, then turn on the Quadrant option so two lines cross at the exact center.
- Increase line thickness and change the line color so the guide is easy to see. Be careful not to tap the color slider while you tap Done, or the lines can reset to white and nearly vanish.
- Tap Done, then reopen Canvas > Crop and Resize.
- Enter your new dimensions and align the crop grid on the guide's intersection.
It's less precise than a true snap, so zoom in and check the edges before you confirm.
How to resample the whole drawing (scale pixels, not just the frame)
Crop mode changes the frame. Resample mode changes how many pixels the artwork contains. In the Crop and Resize screen, look for the Resample option and choose it before you type any numbers. One user report describes setting dimensions first and then switching to Resample, only to find the image had been cropped rather than resized. Choosing the mode first avoids that.
Things to know about resampling:
- The aspect ratio is locked. Changing one axis changes the other. If you want 1000 × 1200 from a 1000 × 1205 image, the width will shift slightly when you type the height. Resampling can't do a non-proportional change. Do a small crop afterward for that.
- Quality is shown as a percentage. Procreate's newer app, Procreate Dreams, displays a Quality readout that rises when you add pixels. In the Dreams handbook's example, dropping the dimensions to 8000 × 2500 pixels reads 50%. Treat the number as a rough guide to how much information each pixel carries.
- Interpolation matters. Interpolation is the method used to invent or discard pixels. Dreams offers Nearest (Neighbor) and Bilinear, with Bilinear as the default. Nearest gives crisper edges with very little softening. Bilinear gives softer edges with less definition.
Device limits on canvas size
Procreate caps canvas size by your iPad's memory. Larger canvases mean fewer layers are available, and some sizes can't be created at all on devices with less RAM. A forum example showed a 24 × 36 inch canvas at 300 dpi failing on a 4 GB iPad, while a lower dpi worked with a limited layer count. Newer devices have more headroom, but the principle holds: if resampling up fails or your layer count drops, you've hit a memory ceiling, not a bug.
How to resize a layer or selection with Transform
When you only need to scale one piece of the drawing, such as a character, a prop, or a texture, use Transform.
- Select the layer. If you only want part of it, make a selection first.
- Tap the arrow icon in the top toolbar to activate Transform.
- Choose Uniform to scale proportionally. Choose Freeform or Distort only when you want to change proportions.
- Drag the corner handles, or pinch, to scale.
- Tap the Transform tool again, or tap another tool, to commit.
Choose the interpolation before you commit
The Transform tool's bottom toolbar includes an interpolation setting, with Nearest Neighbour, Bilinear, and Bicubic options. They behave differently:
- Nearest Neighbour samples the closest pixel and tends to keep edges the sharpest. It's a good fit for pixel art and hard-edged shapes, and it keeps lines crisp when you need them to hold.
- Bilinear averages a 2 × 2 neighborhood, so results are smoother but a little softer.
- Bicubic averages a larger 16-pixel neighborhood. The result is the smoothest, and it can look the blurriest when you enlarge a lot.
A quick test makes the choice obvious. Duplicate the layer twice, give each copy a name that matches its interpolation setting, scale them identically, and compare them zoomed in. Rename the layers so you don't lose track of which is which.
One caution: every transform on raster art resamples the pixels. Scaling a layer up and down repeatedly degrades it each time. Commit a transform once, and undo rather than re-scaling if you change your mind.
Avoiding blur: a practical size strategy
Procreate is a raster tool. Enlarging pixels never adds real detail, so the best fix for blur is to avoid enlarging in the first place.
- Start at the final size or larger. If the drawing will end up in a 3840 × 2160 comp, create the canvas at or above that size, memory permitting.
- Prefer reducing over enlarging. Scaling down is forgiving. Scaling up is where softness appears.
- Use Nearest for hard edges, Bilinear for soft shading. Match interpolation to the artwork instead of leaving the default.
- Resize once, from the original. Keep an untouched duplicate and resample from that when you need a different size, rather than chaining resizes.
- Check at 100% zoom. Soft edges often look fine when fit to screen.
Getting a resized drawing into a motion pipeline
If the artwork is headed for After Effects, Premiere Pro, Nuke, or a 3D scene, match the canvas to your delivery specs before exporting. Common practice is to export PNG for flattened frames with transparency, or a layered file if you want to separate elements for animation.
Scaling raster art inside a comp has the same limits as scaling it in Procreate. A drawing placed at 150% in a 4K composition will look softer than one drawn at that size. If you're stuck with a drawing that's smaller than the frame you need, there are two honest options: redraw or re-export at a larger canvas, or use an upscaling step to prepare it.
That second option is where can fit. It's an AI video and motion tool built around artist control rather than one-click output.
You keep your compositing setup and your Procreate workflow; the tool just adds options after the drawing is done.
Quick troubleshooting
- Drawing got cropped instead of resized: You were in crop mode. Undo, switch to Resample, then enter the numbers.
- Width changed when you edited height: The aspect-ratio link is on. Turn it off if you need different proportions, or accept the proportional change in Resample mode.
- Can't create the canvas size you want: You've likely reached your device's memory limit. Lower the dimensions, accept fewer layers, or work at a smaller size and finish elsewhere.
- Edges look mushy after scaling: Try Nearest Neighbour instead of Bicubic or Bilinear, and resize from your original duplicate.
- Art is off-center after expanding the canvas: Use a Quadrant drawing guide as a reference while you position the crop grid.
Summary
Use Crop and Resize from the Canvas tab to change the canvas or resample every layer, and use Transform to scale a single layer or selection. Pick your mode before typing numbers, choose interpolation to match the artwork, and keep a duplicate of the original. If you plan the canvas size around your final delivery resolution from the start, you'll rarely need to enlarge anything at all.